|
|
The effect of the shrinkage reducing additives on rheological properties of high-strength concrete
Červenka, Jiří ; Kucharczyková, Barbara (referee) ; Daněk, Petr (advisor)
Master’s thesis examines the effect of the shrinkage reducing additives on rheological properties of high-strength concrete. The first part is focused on high-strength concrete in terms of their composition and properties. The second part contains a detailed analysis of the cementitious composites shrinkage problems. Total shrinkage is divided into individual elementary shrinkages. For each of them there is a detailed description of causes and factors that affect their sizes. The next part describes the basic additives used to reduce the shrinkage of cementitious composites. The experimental part is focused on verifying the effectiveness of the shrinkage reducing additives during preparation of high-strength concrete. Usage of shrinkage drains for relative strain measurement enables to determine the process of shrinkage immediately after placing the concrete in the form and to obtain the overall curve of the hight-strength concrete volume changes during its setting and hardening. At the end of the thesis, there are overall analysis and summary of the results of the performed experiments.
|
|
|
Influence of conductive ceramics on the life of lead acid batteries
Tobolák, Jakub ; Vaněk, Jiří (referee) ; Bača, Petr (advisor)
This thesis is focused on lead-acid batteries used in hybrid electric vehicles. These cells work in specific conditions, particularly under partial charge referred to as PSOC. This fact is responsible for the premature loss of capacity cell lead-acid batteries and their short lifetime. The task of this thesis is to examine the effect of conductive ceramics as possible additives to the negative electrode active materials of lead-acid battery cells operating in a PSOC, in order to prolong their life.
|
|
| |
|
| |
|
|
New electrode structures for alkaline accumulators
Fusek, Petr ; Novák, Vítězslav (referee) ; Vrbický, Jiří (advisor)
Master´s thesis is focused on development of electrodes used in alcaline accumulators, by using new kinds of materials and compounds. Basic possitive eletrode was made of nickel, on this electrode were applied new layers of Ni(OH)2 by using the method called electrodeposition. For electrodeposition was used solution with Ni(NO3)2 in diverse concentrations. Later on, this material was enriched with aluminium admixtures to increase stability of alfa modification in Ni(OH)2. These concentrations were measured and analysed in diagrams. For measurement was used device Biologic. The diagrams were commented with recommendations for production use in accumulators.
|
|
|
Determination of additives in multicomponent electrospinning systems
Gajdová, Barbora ; Petr, Knotek (referee) ; Knotková,, Kateřina (advisor)
This bachelor thesis deals with methods of producing nanofibres from mixture of different polymers. Different methods of preparation and production nanofibres by 4SPIN® are described in theoretical part. Experimental part deals with incorporation of additives into fibred layer. There were four different dyes used in this thesis: brilliant green, erythrosine, riboflavin and eriochrom black. UV – VIS spectrophotometry was used to measure volume of additives in nanofiber layer.
|
|
|
Effect of pH on quantitative determination of additives in nanofibers
Grufíková, Jana ; Marek, Pokorný (referee) ; Knotková,, Kateřina (advisor)
The object of my thesis was to prepare a nanofiber layer with dye additives and to quantify the additive content in dependence on pH. The nanofiber layers with additives were prepared by means of electrospinning. The analysis of the additive content in samples was performed by UV-VIS spectrophotometry. Concretely Erythrosine, Eriochrome Black, Riboflavin and Brilliant Blue were analysed. Each of this colors has different chemical structure and charge. The pH was defined by use of buffers, namely acetate buffer (pH 5), phosphate buffer (pH 7,4) and carbonate buffer (pH 10). For Erythrosine and Eriochrome Black the research was extended to study the effect of ionic strength on the quantitative determination of these dyes. It was found that the quantity of the determined additive depends on the pH and also on the ionic strength. However, this dependency is different for each additive. This confirms the assumption of influenced chemical structure and charge by interaction with polymers and buffers used in this experiment. The accuracy of evaluation is influenced by the way of data processing.
|
|
|
An overview of industrial oils
Ondrouch, Dušan ; Ficza, Ildikó (referee) ; Šperka, Petr (advisor)
Methods of production of base oils and their branching are described in the introduction of the thesis. Essential properties, which are the prime aspect of diversification of particular oils, are described in the following part. Commonly used additives, which adjust properties of base oils, are outlined thereafter. The last part of the thesis deals with industrial applications and requirements, which are set for particular application.
|
|
|
Homogenity of aditives in nanofibres
Linha, Vojtěch ; Pokorný,, Marek (referee) ; Knotková,, Kateřina (advisor)
The goal of this thesis was to summarize basic options of fiber spinning and incorporation of additives. Options for nanofiber production by 4SPIN® are described along with particular electrodes for spinning in theoretical part. The experimental part was focused on influence of molecular structure of additives to incorporated volume of the substance. For this research four dye was used: erythrosine, riboflavin, briliant blue and eriochrom black. UV-Vis spectroscopy was used for evaluation of volume of aditives in nanofiber layer.
|
|
|
Oils for combustion engines
Dzurenda, Ján ; Novotný, Pavel (referee) ; Maršálek, Ondřej (advisor)
Bachelor's thesis deals with information search of the current state of knowledge in the field of lubrication of combustion motors, i.e. lubrication systems and oils for combustion motors. The introduction of work focuses on the issue of lubrication systems, theirs partitions by methods of lubrication and description of the main parts of the lubrication system. Next part is focused on the oils of motors. In this part is referred to division of motor oils, requirements for motor oils and characteristics of motor oils. Follow part describes issues associated with the lubrication of combustion motors. Part cites main factors that affect the properties of motor oils i.e. fuel, water, glycol and dirt. Further is processed problem of motor working i.e. temperature, amount and consumption of oil. The last part describes the issues of biodegradability and actual requirements of application for motor oils.
|
guest ::
