|
|
Line protection against overload and short circuit
Konšel, Ladislav ; Vaněk, Jaromír (referee) ; Valenta, Jiří (advisor)
This work includes a theoretical treatise on the operation of electrical wiring for the overload and short circuit. This is mainly on thermal effects of over current and their influence on the properties of conductors and insulation. Work Includes links to determine the load current, depending on the properties of leadership and its surroundings. It also deals with the protection of conductors against overload and short circuit. The work includes measurements process of warming wires. Practical project of proposal circuit is created using SICHR. The project includes proposals of conductor’s sizes and safety components for both residential building and individual flats.
|
|
|
Electrical installation in family home
Pokorný, Marek ; Bátora, Branislav (referee) ; Macháček, Jan (advisor)
The goal of this bachelor paper with the topic " Electrical installation in family home" is to describe laws and public notices that relate to an electrical setting; relevant norms and conditions for a connection to a distribution network (low tension service lines); ways of connections and its location. Furthermore, this paper describes operational conditions, external effects, dimensioning, cabel lodgements and protection (its ways, principles, security and conductor). In a separate chapter low tensinon switch-boards distribution and its instrumentation is covered. Another sphere of this bachelor paper is the field of illumination and lamps. The following chapter deals with sorts of electrical setting (classic, intelligent), low-tension electrical setting (PC distributions), fire and safty electrical setting and audit report elaboration. A practical sample of a electrical installation in family home is shown at the end of this paper
|
|
|
Calculation of electrodynamic forces in 250 A circuit breaker
Görig, Michal ; Dohnal, Petr (referee) ; Valenta, Jiří (advisor)
This master’s thesis deals with the calculation of electrodynamic forces breaker BD250NE305. Main tasks in this semester project is to study the theoretical analysis of individual parts specified breakers. Processing theoretical analysis of these forces. Creating a 3D model current path and sheets quenching chamber single phase circuit breaker in Autodesk Inventor Professional 2012. Another challenge is the subsequent export the model into the simulation program ANSYS Maxwell. After simulation, the specified conditions must be processed and the results of the present work is to evaluate.
|
|
|
Simulation of Heat Transfer in Low-Voltage Switchboard MNS - Optimization of Heat Transfer into The Switchboard
Czudek, Aleš ; Maxa, Jiří (referee) ; Vyroubal, Petr (advisor)
The thesis includes diagnostics temperature field of industrial low voltage. Place of origin, flow and heat transfer are important aspects in the design of the switchgear, especially in terms of proper equipment layout. The correctness of the design of the switchgear is verified by measuring the practical temperature field during testing or in work mode. To determine the temperature profile, it is necessary to measure the temperature at various points of the switchgear, either contact or contactless method. Measurements are performed on standardized low voltage switchboards, which are located power elements. The goal is to replace costly and time-consuming field testing switchgear efficient simulation of the temperature field mathematical model developed switchboards.
|
|
| |
|
|
EMC Test laboratory for low voltage circuit breaker
Vejtasa, Leoš ; Dřínovský, Jiří (referee) ; Dohnal, Petr (advisor)
Nowadays there are electronic systems almost in every new device. They are emitting and receiving electromagnetic interferences. The safety levels for circuit breakers are also increasing. Because of these issues the circuit breakers must work properly also in areas filled by electromagnetic interference. This thesis describes the issues of electromagnetic susceptibility of the circuit breakers.
|
|
|
Simulation of circuit breaker maglatch dynamic behaviour
Konšel, Ladislav ; Dostál, Lukáš (referee) ; Valenta, Jiří (advisor)
This work includes the theory of circuit breaker construction and is focused mainly on overload function. It mainly deals with electronic circuit breakers, i.e. equipped with an electronic trip unit. The work is focused on the part of trip unit - maglatch of trip unit. For the purposes of simulation, the geometric model is created. Maxwell program is used for the simulation. The work describes the options for conditions input which are necessary for simulation. Using the distribution of magnetic field intensity and magnetic flux density in the section of trip unit maglatch is determined by the simulation. Furthermore, the force effects acting on the armature of the maglatch are calculated. Force values and the directions acting on the armature are determined by changing the simulation parameters - shift of the armature and coil current. Simulations are performed both for steady-state and for dynamic simulation – movement of armature is taken into account. The supply source for the maglatch is created by an external circuit.
|
|
|
Eco-analyze of Electric Products
Šebela, Petr ; Ing. Jiří Zpěvák, OEZ s.r.o., Letohrad, Czech Republic (referee) ; Szendiuch, Ivan (advisor)
This work deals with ecological design and appraisal of quality of the electronic devices throughout their life cycle. This area known worldwide as Eco-Design, becomes an integral part of all electro technical productions. This work brings out not only conception of the Eco-Design, but also next related areas with the aim to decrease limitation of negative impact on environment. At the end of the work is compared and summarized the ecological evaluation of the concrete product types.
|
|
|
FEM analysis of overcurrent trip unit
Makki, Zbyněk ; Augusta, Zbyněk (referee) ; Valenta, Jiří (advisor)
The aim of the project was to prepare the given model of the current path in the environment of the SolidWorks programme, in order to simulate the flow path in the environment of the Ansys programme, where there was calculated the distribution of current density,voltage drops and heat loss on the the specified current track according to specified conditions. The obtained results are analyzed at the conclusion of this work.
|
|
|
Simulation of circuit-breaker trip unit
Dostál, Lukáš ; Augusta, Zbyněk (referee) ; Valenta, Jiří (advisor)
Securing of electrical devices is important not only to protect against destruction under the effects of electric current, but also for protection of people or animals against electric shock. With increasing of living standards goes hand in hand increasing of the electricity consumption. Therefore In the grid of low voltage, there are increasing short-circuit currents. With improving technology is posed considerable demand on the performance, security and switching capacity of circuit breakers. This thesis is oriented on development of thermal and electromagnetic switch of circuit breaker on which is put a big demand in development of new types of circuit breakers. The thesis is interesting because of comprehensive use of circuits’ breakers since it can be used in AC and DC networks with frequency of 50 Hz and 400 Hz.
|
guest ::
