|
Design of a Robotic Cell for Additive Manufacturing of Glass Forms
Záveský, Filip ; Kubela, Tomáš (referee) ; Pochylý, Aleš (advisor)
This diploma thesis contains description of design of robotic cell, which automates process of glass neck ring welding. Robot arm is used as manipulator of part between entry conveyor, induction heating, automatic welding machine and outgoing palette. Construction process contains of making layout of the cell, design of needed workstations and minimalize risk of harm for human operator. The final construction design is simulated to verify robot reach and find manipulation time.
|
|
Device for induction heating with a power of 2,5kW
Krist, Petr ; Vašíček, Adam (referee) ; Vorel, Pavel (advisor)
This thesis deals with designing of an induction heating of small iron parts. This device should be primarily designed for a farrier practice or an artistic blacksmithing. Considering the practice, the referential heated iron part will be a horseshoe. The basis of this device is a power inverter with serial resonant circuit connected to inverter as a load. This thesis contains designing and development of electrical and mechanical parts of whole device. It means control circuits, resonant circuit, box for heated part, etc. At the end of this thesis is realization of the device, electrifying, optimization and testing. During the test the horseshoe was heated close to demanded temperature.
|
|
Laboratory heating of MV cables
Vala, Martin ; Lázničková, Ilona (referee) ; Krbal, Michal (advisor)
This thesis deals with options of laboratory heating of high voltage cables. First part of the work is reserved for description of heat as physical phenomenon and quantities connected with the heat. Second part deals with options of temperature measurements of objects in practical use and third part of the work deals with options of cables heating regarding the measurements according the ČSN rules. Practical part of diploma thesis is focused on physical phenomenon description, being under way during measurement using selected methods in individual components and optimization of results for practical measurements.
|
|
The thermal calculation of a induction furnace
Hradilová, Irena ; Raček, Jiří (referee) ; Lázničková, Ilona (advisor)
This work deals with induction devices, in particular temperature computations of induction devices. The thesis is divided into three parts. In the first part, we give basic definitions of inductive warming and theoretical know ledge of heat induction that are needed to understand the problem of inductive warming. In the second part, we describe the principle of induction devices. We focused on crucible furnace which is described in details. We used this device for thermal computation of induction device. In the last part, we theoretically describe procedure of thermal computation of the most used induction devices, i.e., canal furnace, diathermy induction device, and crucible furnace; the last one is compared with the rest of induction devices from the computation point of view. For the induction crucible furnace, we provide numeric thermal computation at the end.
|
|
Optimization of heat treatement for steel beams
Dyčka, Martin ; Foret, Rudolf (referee) ; Jan, Vít (advisor)
This thesis deals with heat treatment of pearlitic steel beams with using of induction heating. The aim of this heat treatment is to improve mechanical properties of steel beams. In theoretical part are described pearlitic steels and theory of induction heating. In experimental part of this thesis analysis of current state of technology with its results was made. Numerical model describing current state of technology was assembled. Then this model was used to recommend adjustments in current technology of heat treatment, which leads to enlargement of heat treated depth. Experiments with adjusted parameters were executed on heat treating machine. Analysis of microstructure using LM and EM, measurement of hardness and fractographic analysis were done. The result of adjustments is enlargement of heat treated depth about half compared with current technology.
|
|
Design of experimental device for testing of subcooled flow boilling
Gleitz, M. ; Zacha, P. ; Entler, Slavomír ; Syblík, J.
The article presents the principle and function of the Hypervapotron and the current work progress on the realisation of the experimental loop. Hypervapotron is a heat exchanger operating in a two-phase flow regime, in which the latent heat of the water/steam phase transformation is used, which enables the transfer of large heat fluxes (up to tens of MW/m(2)). For this reason, it appears to be very promising for use in fusion reactors. The article describes the steps leading to the final design of the experimental loop selection of suitable mesh parameters in the Star-CCM+ code, geometry and used materials of the single elements of the heating system using electromagnetic induction. The effort of the experimental loop and the flow study in the Hypervapotron in general, is dimensional and material optimization of the geometry is suitable for a wide range of applications for which the benefits of subcooled boiling and Hypervapotron geometry can be applied.
|
|
Additional device for the pushing out billets from inductor
Pešek, Josef ; Klepetko, David (referee) ; Kašpárek, Jaroslav (advisor)
The master thesis deals different types of additional device for the pushing out billets from inductor. It includes individual machines from different manufacturers induction heating and their comparison. I designed my own solution and created a 3D model according to which a fully functional device was made. By verifying the functionality, a numerical simulation of the dynamic extrusion process was created. Part of the work is drawing documentation.
|
| |
| |
|
Induction heater converter
Holcman, Marek ; Knobloch, Jan (referee) ; Martiš, Jan (advisor)
This thesis deals with the design of a power converter for induction heating of iron components designed for a power of at least 2.5 kW. The induction furnace forms a series resonant LC circuit. The thesis contains a description and a design of individual parts of the converter, including wiring diagrams and a design of printed circuit boards. At the end of the work are then described the mechanical construction, the course of recovery and testing the operation of the inverter.
|