|
|
Multifunctional building
Prokop, Radek ; Kantořík, Petr (referee) ; Utíkalová, Ivana (advisor)
My diploma thesis deals with project a multifunctional building. My project corresponds to the scope of documentation for the execution of construction. Building hat five floor and construction roof is green roof, single-layer flat roof. Construction systém is cast-in-place concrete frame. In basement is technical facilities and parking place. In ground floor is shop place and parking floor. In first floor is office place. In third and fourth floor are flats. Building foundations are bored cast in place pile – method CFA.
|
|
|
Realization of the rough construction of a polyfunctional building, Moravský Svätý Ján
Hladíková, Simona ; Nečasová, Barbora (referee) ; Novotný, Michal (advisor)
The aim of this bachelor thesis is to solve the stage of the upper rough construction of a multifunctional house in Moravský Svätý Ján, which is a monolithic skeleton. This skeleton is made up of columns, beams and a cross-reinforced ceiling slab. The object's construction system is bi-directional. The staircase is made up of prefabricated elements and its supporting structure consists of brickwork made of grounded Heluz bricks. The building is non-blocked and has three above-ground floors, but the monolithic skeleton forms only the first and second floors. The third floor consists of a cladding made of grounded Heluz masonry, which forms the supporting structure of the roof made of sculpted wood joinery. The project was provided by Ing. Hušek Miloš. The project was adapted to enter a replacement land in Moravský Svätý Ján, otherwise the building is located in the Moste near Bratislava.
|
|
|
Polyfunctional Building VEKTOR in Pardubice, Preparation for Building Realization
Vančura, Jaroslav ; Patloka, Jiří (referee) ; Šlanhof, Jiří (advisor)
The subject of the diploma thesis is construction technology project of polyfunctional building VEKTOR in Pardubice. Building object has seven overground floors and has not basement. The construction system of the building is a monolithic skeleton consisting of columns and a ceiling slab. Part of the thesis includes technical reports, construction technology study, situation with wider transport route relationships, the project of the construcion zone equipment, suggestion of machines and mechanisms, plan for securing material resources, technological regulation for monolithic constructions, control and test plan for monolithic constructions, item budget, time schedule, chronological and financial plan of the building – object.
|
|
|
Multifunctional house Prudký - construction technology project
Kaláb, Ondřej ; Valenta, Michal (referee) ; Biely, Boris (advisor)
The aim of this Diploma Thesis is constructionally - technological solution of the rough construction of polyfunctional house on the corner of Bánskobystrická and Medlánecká streets in Brno Řečkovice. In the Diploma Thesis I will deal with the plan of the work procedure of the execution of roof construction layers, machine sets, itemized budget, construction schedule, construction site equipment, inspection and testing plan, ecology and transport relations related to the construction. I would like to point out the complication of the construction with a lack of space because the construction is in the area of Brno Řečkovice. The plan of construction execution was more difficult due to lack of space for storage of materials and machinery handling.
|
|
|
Multifunctional building object
Habartová, Lucie ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The diploma thesis deals with design documentation multifuncional object in Uherský Brod. The building consists of two parts. First part has five floors and saddle roof with an angle of 12°, second part has three floors and green roof. In the basement are car parking and storages. In the first floor is a pharmacy, restaurant, shop and hairdresser´s. In the second floor is located fitness center and four flats. In the third and fourth floors are nine flats. The structural system of building is reinforced concrete frame. The project was processed by a computer program ArchiCAD.
|
|
|
Hotel "U Prehrady"
Černý, Dávid ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis was to process the study and the design documentation for a newly built hotel in Brno, in city district “Kníničky” near the artificial dam “Přehrada” in a rest area. The hotel will serve as temporary accommodation for up to 64 hotel guests in single, double and four bed rooms. The object also contains training rooms, offices, a meeting room, a café, a small grocery store and a restaurant with kitchen. Parking is possible in one of the two mass garages and there is an outdoor parking possibility in front of the hotel too. The building has a cast-in-place concrete frame with longitudinal beams and sway bracings. The external wall consists of aerated concrete bricks with contact thermal insulation system ETICS (insulation material mineral wool), the ceilings will be cast-in-place reinforced concrete ceilings and the roof flat green roof or flat roof with gravel on it above the 5th floor. The foundation construction consists of reinforced concrete foundation strips, which expand to foundation pads under the load-bearing columns and will be supported by piled foundations under the most exposed elements. As long as the hotel is situated into a fairly steep slope, the vertical alignment of some building parts is various so part of the project is the design of landscaping works. Design documentation was processed using the program AutoCAD 2017, the study and the visualization using both SketchUp 2015, LayOut 2015 and Lumion 5.
|
|
|
The library building technological project
Brandtner, Michal ; Venkrbec, Václav (referee) ; Henková, Svatava (advisor)
The subject of this final thesis is the building technological project of the library on the street of Kravi hora in the Brno. The final thesis includes a technical report, a coordination situation, a situation of the construction with wider relations with transport route links, a time schedule and financial plan of the construction, a site equipment project, a design of the main machines and mechanisms, a time schedule of the main building object, a supply plan and a plan for transport routes, a technological regulation for cast-in-place floor structure, a control and test plan, a health and safety plan at work on a construction site binding for a carcass, an itemized budget for carcass, a comparison of the solutions for realization of the cast-in-place floor structure and the technological regulation for technology of capture of rainwater for further use.
|
|
|
Implementation of Superstructure of City Hotel in Brno
Hetteš, Adrián ; Nečasová, Barbora (referee) ; Liška, Pavel (advisor)
The aim of this bachelor thesis is the processing of the building-technological project for Implementation of Superstructure of City Hotel in Brno. For the realization of the stage was elaborated a technological note for cast-in-place concrete frame with point-supported slabs and technological note for external wall from the YTONG system. For the part of the construction were elaborated items budget, time schedule and designed set of machines. The thesis also includes a project of site equipment, transport roads, safety and protection health at work and quality control of the perfomered works.
|
|
|
Administration Building ERA in Pardubice - gross superstructure
Gabriel, Jan ; Řihák, Pavel (referee) ; Biely, Boris (advisor)
The aim of the bachelor thesis is to work on the construction-technological project of the rough top construction of the new administrative building ERA in Pardubice. It is a four-storey building with a roof superstructure. The support system consists of a monolithic reinforced concrete skeleton, including the staircase, which will be the main object of the bachelor thesis.
|
|
|
Construction technology project of polyfunctional building in Brno
Hrabovský, Tomáš ; Nečasová, Barbora (referee) ; Diaz, Yvetta (advisor)
This thesis deals with construction technology project of polyfunctional building on the Štefánikova street in Brno. Building has five overground floors and basement. In relation to the construction technology project it deals with chronological and financial plan, a suggestion of main construction machinery and mechanisms, materiál resources and transport routes, the project of the construcion zone equipment, technological plan and inspection and test plan for monolithic constructions and schedule of work.
|
guest ::
