|
Usage of recycled materials to asphalt mixtures
Zítka, Patrik ; Kašpar, Jiří (referee) ; Hýzl, Petr (advisor)
This thesis deals with the R-material use in asphalt mixtures. In the theoretical part, different kinds of flexible pavement recycling and ways of adding R-material into asphalt mixtures are discussed. The practical part deals with asphalt layers design and manufacture, specifically for binder course ACL 16+. R-material content in the blends is 0%, 20%, 25% and 30%. EVOTHERM MA3 rejuvenator is used as additive for softening of R-material. Various mixtures are compared based on tests - resistance to permanent deformation, resistance to the effects of water and low temperature properties.
|
|
Design of special asphalt mixtures SAL for the repair of cement concrete pavements
Kalfeřt, Martin ; Špaček, Petr (referee) ; Varaus, Michal (advisor)
In this thesis layer with increased resistance to crack propagation (SAL) are designed. The theoretical part describes the SAL layer, further the input materials, their production and design of various mixtures. The following is a description of the tests, which include tests of permanent deformation, crack propagation, low-temperature characteristics, test, flexural strength and relaxation. After the test results and conclusion are stated.
|
|
The issue of increasing the proportion of reclaimed asphalt in asphalt mixtures
Urbanec, Luboš ; Mondschein,, Petr (referee) ; Hýzl, Petr (advisor)
The subject of this Ing. thesis is asphalt mixture with increasing RAP (Reclaimed Asphalt Pavement). The theoretical part defines the terms of recycling and RAP and types of recycling. The practical part is devoted to the production and testing of asphalt mixtures with different volume RAP. The proposed asphalt mixture is asphalt concrete for base layer ACP22 +. Content of RAP in mixtures is 0%, 30%, 50% and 70%. As a special additive to soften the asphalt from RAP is used ingredient STORFLUX. For each mixture are established modulus stiffness of asphalt mixture and determined fatigue characteristics of asphalt mixture. The identified properties are compared for the different representation of RAP.
|
|
Desing and evaluation of Bituminous Stress Absorbing Pavement Layer
Coufalík, Pavel ; Špaček, Petr (referee) ; Kudrna, Jan (advisor)
This master's thesis deals with the possibility of special asphalt-rubber mixture using - Stress Absorbing Layer (SAL). In the theoretical part the SAL and test methods are described. In the practical part, several different mixtures are designed and selected mixtures were tested. Low-temperature characteristics, permanent deformations, bending tensile relaxation, stiffness modulus and fatigue properties were determined. Based on the test results the mixtures were compared and their benefit is evaluated according to Performance Pavement Design Method, the pavement structure was evaluated by using of computer programme LayEps.
|
| |
| |
| |
|
Low noise pavement surfaces
Zítka, Patrik ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
This bachelor´s thesis focuses on the use of low-noise road surfaces, due to a constant increase of traffic noise nowadays. Within this work different types of roadways are analyzed and their advantages and disadvantages are shown. Additionally, the basic measuring methods of the traffic noise are described and summarized. Finally the procedures and results of the measurements on noise emissions on low-noise surface VIAPHONE® are discussed.
|
| |
| |