|
Flight Timer in Ultramicro Aircraft/Helicopter
Široký, Adam ; Mlích, Jozef (referee) ; Zemčík, Pavel (advisor)
This thesis deals with the development of embedded system for ultra light airplanes and helicopters. The aim is to design a system which would allow to measure and record the length of individual flights. It is therefore an onboard electronic diary which should facilitate and streamline the administration associated with sport aircraft operation. The base of the system is created on microcontroller of the MSP430 family by Texas Instruments. A reader will be offered the used hardware, the system design, the way of function and the possibility of using of the suggested system.
|
|
Upgrade Thermal Chamber
Pagáč, Radek ; Marada, Tomáš (referee) ; Zuth, Daniel (advisor)
The target of this work is to modernize air-conditioning control of the unit Thermal Chamber. The old air-conditioning unit will be renewed by replacing old one by new one, microcontroller-driven control unit, trough which it will be possible to show the current and desired temperature LCD. Theoretically description of the components and methods of measuring the temperature and environment for the creation of the microcontroller is shown before construction.
|
|
Environment control with microcontroller
Králíček, Martin ; Šebesta, Jiří (referee) ; Fedra, Zbyněk (advisor)
This bachelor project focuses on equipment for environment management and check with help of microcontroller. This equipment should enable us to check and manage home environment for example for goldfish, hamsters, spiders and other small pets. Further on, this project describes individual parts of equipment which the ECM-01 consists of. ECM-01 is consists of general block, feed block, relay block with power supply and sensors. The ECM-01 consists of several functional blocks which are controlled by the main microcontroller. The functional blocks contain measurement transducers and action units. The choice of blocks depends both on individual environment and the user. The user can choose which values he needs to control and measure.
|
|
Datalogger with Ethernet
Orávik, Tomáš ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
Thesis deals with Datalogger with Ethernet interface controlled by DISCOVERY Kit STM32F429. Datalogger is equipped with eight digital inputs and three analogue inputs. The measured data are saved on the SD card. The Ethernet interface module is designed using LAN8720A from Microchip.
|
|
Image sensor signal data processing
Růžička, Jakub ; Macháň, Ladislav (referee) ; Žák, Jaromír (advisor)
This diploma thesis deals with an image capturing by a CMOS image sensor and controlling of graphical LCD displays using specialized integrated circuits. A theoretical research on the topic and design of the system designed for ease of processing, transmitting and still images displaying based on this research is described in this work. The output of the work is complete the device realized.
|
|
Design and implementation of the LCD display drivers for Raspberry Pi
Cepl, Miroslav ; Lattenberg, Ivo (referee) ; Krajsa, Ondřej (advisor)
The aim of the course work is to design and implement a driver for touchscreen LCD display. The premise of the connection the display to the microcontroller using the I2C bus and use MCP23017 circuits. Raspberry Pi B + will be used for communication with circuits MCP23017 via I2C bus. Display TFT_320QVT will be connected to the outputs of extension circuits MCP23017. Part of the display complete is also a touchscreen with XPT2046 controller. Raspberry Pi runs on Raspbian system based on the Debian Linux distribution. The driver will serve to communicate and display information on the screen. The complete will be useable for applications such as selecting settings and show main information on the display.
|
|
Small CNC machine
Moštěk, Jiří ; Matěj, Zdeněk (referee) ; Záplata, Filip (advisor)
This diploma thesis deals with the design and construction of a three-axis CNC machine primarily designed for PCB drilling and production of front panels for various electronic devices. All three axes are driven by stepper motors NEMA 23 which are connected to stepper motor drivers L6470. Processor STM32F407 is used to control the whole machine. The wiring is completed by a LCD display with touchscreen which is used to communicate with user. Data for drilling can be entering manually or via USB inerface. Part of this thesis is the selection of a suitable construction and components, assembling equipment, wiring design of electronic circuits and writing the code to control the machine. Finally, the parameters of the designed device have been measured.
|
| |
|
Class D audio power amplifier with microprocessor controlling
Nedbal, Jan ; Papica, Petr (referee) ; Brančík, Lubomír (advisor)
The thesis deals with the design and practical realization of class D audio power amplifier with microprocessor controlling. The first part describes the integrated circuits used in a preamplifier and his complete design with a description of the control program for ATmega128 microcontroller. The following part describes an integrated power amplifier TAS5613 and his circuits. The next section describes a switching power supply design using integrated circuit TOP261EN. The last section describes measurements of parameters of individual parts of the amplifier.
|
|
Security system for family house
Sohr, Martin ; Macháň, Ladislav (referee) ; Jaroš, David (advisor)
Family house, security system, wireless communication, IQRF, RSA, central control unit, SPI, I2C, glass break sensors, motion sensors, magnetic contact sensors, graphic displey, LCD displey, microcontroler, SIM900, 24FJ256GB106, EA DOGM106, eDIPTFT43-A.
|