|
| |
|
|
Piston Rings of Modern Diesel Engines
Homola, Petr ; Knotek, Jiří (referee) ; Raffai, Peter (advisor)
This bachelor thesis concentrates on piston rings and is divided into several points. First point deals with the functions of piston rings and with the demands for them, in the second point there is a division according to the type of the ring and constructing solution. Another chapter deals with materials that are used the most when fabricating piston rings and the last chapter deals with the surfacing that is used the most.
|
|
|
Surface finishing of plastic parts
Nguyen, Manh Thanh ; Škaroupka, David (referee) ; Paloušek, David (advisor)
The main topic of this barchelor thesis is surface finishing of plastic part manufactured by FDM technology. The thesis includes experimetal part which aim is to test various possibilities of surface finishing by acetone vapour etching. Two different samples of ABS materiál will be used for testing. Changes of dimension and geometry will be observed.
|
|
|
Galvanizing of steel components
Turkovič, Matúš ; Hanusová, Petra (referee) ; Zelený, Martin (advisor)
This thesis deals with galvanic, i.e. electrochemical plating. It is concerned with chemical and physical principles that accompanying plating followed by general overview of metal coatings as well as describes the process of their application. In detail, it is focused on nickel coatings. Part of the work is focused also on practical deposition of such coatings on steel samples as well as on study of effects of plating conditions on prepared coatings.
|
|
|
Piston Rings of Modern Petrol Engines
Cupák, Václav ; Maršálek, Ondřej (referee) ; Raffai, Peter (advisor)
This bachelor thesis deals with issues of piston rings used in modern petrol engines. The first part is focused on describing of functions and requirements with which piston rings must deal with. Next part is aimed on shapes of piston rings. Materials from which are piston rings made of are part of third chapter. For proper function, it is important to make some surface treatment. The last chapter contains surface treatment of piston rings.
|
|
| |
|
|
Modern slide bearings
Lesák, Tomáš ; Raffai, Peter (referee) ; Maršálek, Ondřej (advisor)
This bachelor thesis is professional research dealing with an overview of slide bearings in current use and their advantages and disadvantages compared with ball and roller bearings. It also describes the design, manufacturing technology, materials used for the manufacture of plain bearings, their coatings types and lubrication which are important factors in the life of the bearings.
|
|
|
Replacing of metal sheets with laminates
Ulrich, Josef ; Němec, Karel (referee) ; Molliková, Eva (advisor)
The aim of the bachelor´s thesis is composite material, specifically fiberglass. In the first part of this thesis fiberglass is described, their composition, chosen production technology and possibility of use. Mechanical properties and its advantages of fibreglass are compared with metal sheets. Fibreglass is described on example of particular component.
|
|
|
Surface treatment of roll bearings
Kubelka, Milan ; Klakurková, Lenka (referee) ; Švejcar, Jiří (advisor)
The bearings are one of the most widely used construction components enabling mutual movement of parts and at the same time transmission of interacting load. The basic requirements placed on components of roll bearings are particulary increase of contact fatigue resistance, decrease of the friction coefficient between the rolling bodies and bearing rings, increase of hardness and abrasion resistance of functional surfaces, the wear resistance, corrosion protection and finally the electrical and optical properties too. As production of bearings from materials with these attributes would be quite expensive, surface modifications are used for improving the mechanical properties. The main task of this bachelor thesis is description and evaluation of technologies suitable for surface treatment of roll bearings with increased attention to those types of surface treatment which, in cooperation with SVÚM will be studied in more detail in the experimental part of this work (especially polymer coatings, phosphate films and DLC - type coatings). The wear evaluation of different types of coatings was performed with the aid of scanning electron microscopy after the tribological testing.
|
|
|
Application of Surface Treatment on Hand Tools
Vraspírová, Eva ; Klakurková, Lenka (referee) ; Doležal, Pavel (advisor)
Bachelor's thesis deals with problems of materials, which are used to production of hand tools and implements. The theoretical part is focused on tool steels, their mechanical and technological characteristics and to their heat processing. Below there are well-arranged and described surface modification, which are applied to materials nowadays. The next part is focused on modern technology of surface modification, which are applied to hand tools. The research is mainly focused on technology of production of bits by company Wera Werk Ltd, which is deal with production and distribution of hand tightening tools, such as screwdrivers, angular keys, plug keys, bits and torque tools. Attention is also paid to technology of surface modification, e.g. based on zinc phosphate, nickel, nickel-gold and nickel-diamond-gold, used for these tools and to problems of painting. To elements interaction study light microscopy, the hardness measurement by Vickers and Brinell and scanning electron microscopy equipped by energy dispersive microanalyses.
|
guest ::
