|
|
Single-Phase Induction Motor
Vácha, Pavel ; Lapčík, Josef (referee) ; Hájek, Vítězslav (advisor)
The bachelor work is concerned the thesis of a single-phase induction motor that´s perpetually more used in all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. The practical part contains a basic schema calculation of the single-phase induction motor with an auxiliary phase and a processing demonstrate example of calculation of the single-phase induction motor with concrete parameters along suggested process. In the conclusion there is the evaluation of the whole process.
|
|
|
Measuring RLC on the components of electrical circuits
Pokorný, Marek ; Vítek, Ondřej (referee) ; Veselka, František (advisor)
Aim those work is inform numerator about possibilities and features gauging apparatus 7600 Precision LCR undergrounds and further then about metering paramers R,L,C on components electric standing ,especially then on sliding contacts,with which this work acquaint and how are their characteristics important for correct functionality electrical machine whereof are site rated power.Warp work largely start from manual to apparatus 7600 Precision LCR undergrounds and further then out publication sliding contact in electrical machine - doc. Veselka, doc. Chmelik.
|
|
|
Frequency filters controlled via microprocessors
Bronec, David ; Kincl, Zdeněk (referee) ; Biolková, Viera (advisor)
This thesis is focused on the microprocessor-controlled frequency filter project. The main goal of the thesis is to present basic terms and principles of frequency filters and active frequency filters for cascading synthesis. Furthermore, the work contains information on digital potentiometers. The thesis includes circuit simulations and a project of connecting with a printed circuit board. The last chapter contains the results of the measurements.
|
|
|
Calculation of heat and force field UniGear ZS1
Mokrý, Lukáš ; ABB, Drahomír Tůma, (referee) ; Dohnal, Petr (advisor)
The aim of my work is to describe high-voltage switchgear type UniGear 500R, which is part of UniGear switchgears family. I will focus on heating issue of one 500R unit and its parts during operation. Maximum values of this heating is limited by standards and can´t be exceed to ensure safe and reliable operation. That is why the heating tests are necessary part of designing and developing switchgears. Calculation will be made by two different ways. First is classic one-pole heating net method and second is numerical simulation in Solidworks flow simulation program. Except the theoretical description there will be presented also used 3D model and explanation of both method, used to calculation and simulation. Last point of this work is measuring of this type of switchgear and getting real data. The main point there is to compare measured values with values calculated and decide if is possible to simulate tests with appropriate accuracy. Then would be also possible to substitute the real test in laboratory, which costs many thousand crowns and takes lots hours of time. This work is collaborated with EJF division of ABB Company, where I am employed. Heating issues in this company is always on process, because of developing and improving of their products. So this work could be helpful in this field. ABB provides all materials needed, especially technical catalogues, 3D model and final values from laboratory measuring. Support from college faculty is mainly in study consultations and proposing of calculations making. In the end of work will be make final comparison and evaluation of achieved results.
|
|
|
Quantification of measurement uncertainty using Monte Carlo
Mareš, Jaroslav ; Šedivá, Soňa (referee) ; Havlíková, Marie (advisor)
This master’s thesis is focused on evaluation of standard uncertanities of measurement by method GUM and Monte Carlo and theirs comparation. In first part of this thesis is made the theoretical analysis of evaluation of measurement uncertanities and proposal of methodology for evaluating uncertainties by Monte Carlo method. In the second part is described direct and indirect measuring of resistance, capacitance and inductance, including evaluation of standard uncertanities of those measurings by GUM and Monte Carlo methods. In the end of this thesis is made comparison of achieved results of spoken methods.
|
|
|
Oscillators and function generators using current and voltage conveyors
Šťastný, Lukáš ; Jeřábek, Jan (referee) ; Koton, Jaroslav (advisor)
Conveyors are an integral part of modern devices. In this thesis, a slew of areas oscillators and function generators with current and voltage conveyors. Individual applications are categorized according involvement with conveyors and other elements. The functionality of the need for involvement in the program PSpice simulation. As a current conveyor is used OPA861, EL2082, further use of RC circuits and opto-CNY 17.
|
|
|
Single-Phase Induction Motor Calculation
Vácha, Pavel ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
The master´s thesis deal with the thesis of a single-phase induction motor that is more and more used all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. Than the work contains a project of basic schema of the single-phase induction motor with an auxiliary phase. The practical part is devoted to an elaboration of demonstration example of the single-phase induction motor with concrete parameters calculation, its method was projected before. Than there is practising successived measuring on the motor of the same parameters made firm EMP s.r.o. Slavkov by Brno in this part. In the conclusion there is the evaluation of the whole process with reached results.
|
|
|
Dynamic simulation of DC motor using FEM
Gottwald, Michal ; Huzlík, Rostislav (referee) ; Vítek, Ondřej (advisor)
My diploma thesis deals with a specific dynamic model of DC motor with the parameters obtained from the calculation and from the program using the finite element method. It shows how much accurate results can be achieved in the model, if you use only the values which can be measured, recorded and calculated on the engine. This thesis contens three parts. First part describes the structure and function of DC motor and the basic principle and the use of FEM. Next is calculation analytical and numerical parameters. The search parameters include torque, resistance and inductance of armature winding, resistance and inductance of excitation windings. The last part is dedicated to creating a dynamic model. Results from the dynamic model and measured values are compared in the conclusion of my thesis.
|
|
|
Stabilized operation of a 400 kV power line
Girga, Eduard ; Špaček, Jaroslav (referee) ; Blažek, Vladimír (advisor)
Electrical wiring 400 kV is the most used transfer wiring in the Czech Republic with length over three thousand kilometers. It is frequently used for running out significant output from the big power plants and for its significance in electrical engineering. Theoretical part of this thesis deals with the cross-section of mainly used methods for high and extra high stable wiring voltage solution. These methods can be generally dividend into precise and rough. Both of these methods will be analyzed in next chapters. Exact solution comes out from the presumption of equally spaced parameters. The rough solution uses substitution of double gates wiring, this method is accurate enough and accelerates the calculation. Former mentioned reasons explains it’s often use in technical practice. The electric line is substituted by T-cell, II-cell or Steinmetz cell according to length and required precision. Special method of rough solution is the broad method which enables to solve randomly knotted network by using II-cell to replace electric wiring between single knots. This method is mentioned in thesis for completeness; the network solved by me is not knotted. Part of the theoretical thesis is the analysis of specific transfer cases. In computing part will be mentioned not only the computation of stable wiring state with precise an rough method - with all former mentioned cell but the computation of specific transfer cases as well. In the end will be concluded all the counts from computing part and from precision view evaluated used methods of the stable wiring solution.
|
|
|
Tissue impedance measurement
Nejezchleba, Zdeněk ; Rampl, Ivan (referee) ; Chmelař, Milan (advisor)
Bachelor thesis deals with the measurement of resistance of the skin with direct current. It describes the changes in the value of time, depending on the emotional stability of the human and his psychological habit. It is a method able describe the relatively objectively and compare human emotions.
|
guest ::
