|
|
Design of container for oil product storage
Mifek, Roman ; Nekvasil, Richard (referee) ; Létal, Tomáš (advisor)
Purpose of submitted thesis is design of container for oil product storage. First part introduce with issue of tank containers and their type division. Next part aims on tank containers with angular inner vessel and their utilization opportunities. In final part of this work, there is made design of container and strength analysis by final element method, using software ANSYS Workbench. Annex includes design documentation.
|
|
|
Biomechanics study of hip join
Ebringerová, Veronika ; Marcián, Petr (referee) ; Florian, Zdeněk (advisor)
This work deals with the description of physiological joint resultant force and the subsequent comparison with patology of the hip. Then here is described the basic anatomy of the hip. Finally, ANSYS software was used to display the results both contact pressure and total mechanical strain intensity.
|
|
| |
|
|
The deformation necks and their use in forming technology
Grufík, Lubomír ; Štroner, Marek (referee) ; Peterková, Eva (advisor)
The project which was elaborated in bachelor education presents summary of deformation necks and their use in forming technology. Pursuant to of the literary pursuit a problem of deformation necks in forming technology there were formulated description of given methods, summary of methods spreading of deformation necks on the surface of half-finished products, their assets and use in practice. Then there are conspectus of computer simulation, which is used so to evaluation of deformation and transformation, its advantages and disadvantages in practice.
|
|
|
Estimation of effective material characteristics of polymer composites
Máša, Bohuslav ; Hutař,, Pavel (referee) ; Náhlík, Luboš (advisor)
The bachelor thesis deals with determination of the effective elastic material characteristics of particle reinforced composite with polymer matrix. The first part of the work is devoted to the estimation of the elastic properties on the base of analytical relations found in the literature. The second part is devoted to the numerical modeling of the particle composite using finite element method. Two different polymer matrixes are taken into account and two different compositions in the particles in the matrix were considered. The calculations were performed for wide range of particle volume fraction. The results from both analytical and numerical estimations were compared and useful analytical relation for estimation of effective elastic material properties of given kind of composite has been found.
|
|
| |
|
|
Influence of stiffness connections on loading of steel structures
Šik, Jan ; Vlk, Zbyněk (referee) ; Nevařil, Aleš (advisor)
This bachelor thesis focuses on the analysis of the real behavior of the joints in steel structures. The introduction describes different approaches to the modeling of joints. The first approach is based on algorithms found in normative documents ČSN EN. The other approach deals with numerical modeling of the joints using the finite element method (FEM) in SW ANSYS. In conclusion, the comparison of results of different approaches to the modeling of joints.
|
|
|
Response analysis of high-rise storage tank to static and dynamic loads
Strnadlová, Kateřina ; Vlk, Zbyněk (referee) ; Nevařil, Aleš (advisor)
This thesis describes the design and construction of water reservoir assessment for static and dynamic loads. The intoduction describes the basic design type sof reservoirs, thein static solution and design conditions. It made a preliminary calculation for determining the thickness of the shell structure and designed structure is then solid using the finite element metod (FEM) in ANSYS. In conclusion, verification of load-carrying capacity, stability and usability according to standard ČSN EN.
|
|
|
Static Analysis of the Parts of the Textile Structures
Husáriková, Natália ; Gratza, Roman (referee) ; Kytýr, Jiří (advisor)
Bachelor thesis deals with elastic modulus determination by experimental measurements and comparison with the manufacturer's declared values. Own methodology for measuring membrane strip is proposed in this thesis. Thus determined values of elastic modulus are used in analysis models using ANSYS software. Calculated values of displacements are compared with the manually measured values of displacements during the experiment. Membrane strip with a hole is modeled in the same way.
|
|
|
Retaining Walls
Michalčák, Jan ; Fiala, Radek (referee) ; Glisníková, Věra (advisor)
This bachelor thesis deals with retaining walls, methods of the design and defects. The thesis then focuses on gebion retaning walls and their defects. The adopted design of the model of gabion for the calculation through final element method (FEM) is here processed and verified. In the practical part findings are applied to a real situation along a cycle path near the village called Tatranská Polianka. The designed retaining wall from gabion baskets is calculated analytically, using the programme GEO5 and PLAXIS 2D. In conclusion, results are evaluated and compared.
|
guest ::
