|
|
Study of Hydration of Anhydrite Binders
Duda, Štěpán ; Smetanová,, Lenka (referee) ; Gazdič, Dominik (advisor)
Presented bachelor thesis deals with the study of hydration of anhydrite binders. This thesis is primary focused on testing the various hydration exciters of anhydrite and subsequent monitoring of the hydration process by the XRD analysis and also builts on previous research in this area at the institute of THD. Conceptually is this work divided into two parts. The first part deals with the general theory of sulphate binders. The second part is devoted to the partical testing of the various hydration exciters and their subsequent comparsion.
|
|
|
Converter for high-speed induction motor
Veselý, Petr ; Pazdera, Ivo (referee) ; Procházka, Petr (advisor)
The semestral thesis deals with designing a frequency changer. It describes general information about induction motors and power electronics, focusing on pulse converters. Based on given parametres, appropriate components were chosen and described. Also, there is power loss calculated in this document, which is used for dimensioning cooling. Also an LC filter is designed in this dokument. At last, there is a printed circuit board designed for the power part.
|
|
|
Comparison of switching LED drivers
Káňa, Vojtěch ; Šotner, Roman (referee) ; Frýza, Tomáš (advisor)
This bachelor thesis describes switching LED drivers and their features. Is chosen and compared five integrated circuit, that one of them will be included in two different topologies. Especially in Buck-Boost and SEPIC configuration. Their characteristics and features will be simulated and designed in suitable software. Made equipment will be tested and compared their achievements properties. For a both of these drivers is required specified conditions as constant output current, input and output voltage.
|
|
|
Control system for cantilever gates
Koždoň, Ondřej ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
In this bachelor's thesis is designed and in detail described a battery powered control system for wireless controlling swing gate. This system is designed as a small electronical system with necessary Inputs/Outputs (I/O) an Input for powering from solar cells and it is equipped with requisite software.
|
|
|
Coilgun
Kovařík, Martin ; Pavlík, Michal (referee) ; Šteffan, Pavel (advisor)
This bachelor’s thesis describes the design and construction of electromagnetic gun for testing projectiles from different ferromagnetic materials with maximal power 19 J. Conventional projectile propulsion mechanisms include the use of compressed air or explosion which places theoretical limits on the maximum muzzle velocity limited by laws of thermodynamics. The electromagnetic coil gun, explores the use of electromagnetism in accelerating projectiles which offers a much higher theoretical limit on muzzle velocity. In addition of an electromagnetic acceleration is possible to regulate output velocity/energy of projectile, and acceleration applied on projectile.
|
|
|
Switching LED drivers
Doležal, Miroslav ; Pavlík, Michal (referee) ; Šteffan, Pavel (advisor)
In this bachelor’s these are three basic typologies of drivers (step down, step up, step up and down output voltage) described. Five specific integrated circuits fulfilling the requirement for supplying LED diodes are selected. The output of this thesis is the design and construction of LED driver for supplying high brightness LEDs with 900 mA constant current.
|
|
|
Switching power supply based on high voltage Si/SiC MOSFET transistors
Darida, Slavomír ; Procházka, Petr (referee) ; Pazdera, Ivo (advisor)
Bachelor’sthesis is based on semestral thesis, which was focused mostly on problematic of switching power supply design with following parameters 3x400V AC/15V DC, 3,333A. Bachelor’s thesis adds algorithmic calculations of converters winding parts for forward converter and also for flyback convertor. These algorithms are created with Matlab. Next extension is design of two different forward convertor’s conceptions. Current mode PWM regulation is the first one and voltage mode PWM regulation is the second conception. Because current transformer is needed for secondary current sensing in first conception, its design is added also with algorithm calculation. Important is that both of these conceptions are using same excitation system. Excitation system functional tests are classified at the end.
|
|
|
Drivers for power SiC MOSFET transistors
Vitek, Vojtech ; Vorel, Pavel (referee) ; Procházka, Petr (advisor)
The bachelor thesis describes gate driving principles of power MOSFET transistors made of silicon carbide material. The autor's aim is describing a different types of gate drivers and basic rules during process of designing gate drivers. In the theoretical part, the author will mount printed circuit board of gate driver designed on UVEE FEKT VUT Brno and verify functionality.
|
|
|
Design of switching class audio power amplifier
Bronec, David ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
This bachelor thesis is dealing with the issues of the switched category output amplifiers and its aim is to design and to construct a stereo amplifier with the energy output about 100W. The amplifier is constructed in the switched category D. The design of the corrective preamplifier with the correction of depths, heights and the balance functions is also described. Furthermore, this thesis deals with the description of the switched power supply with the TOPswitch control circuit. The design is also supplemented by the simulations and the printed circuits of each part. There are also some photographs of the device and the measurement protocol is included too.
|
|
| |
guest ::
