|
|
Static analysis of reinforced concrete floor structure of historical building
Nani, Pavel ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
The chief objective of my bachelor’s thesis is a design of the reinforced concrete floor structure of a historical building over 1st floor. The historical building was built in 1874. There are three floors in this building and there isn’t any underground floor. The reinforced concrete floor structure consists of the following forms of structure – a ribbed ceiling, a floor slab, a beam, a shell of vault and a staircase. The ribbed ceiling is made from a lost formwork of the VELOX firm. The set reinforced concrete floor structures are according to ČSN EN 1992-1-1.
|
|
|
Design of a one-span beam bridge
Fojtů, Jan ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The aim of the thesis is a safe and economical design of a bridge over a watercourse according to all valid regulations and standards. There were designed three possible options in accordance with the recommended dimensions. The variation with the cross-section that consists of two beams and effective width of flanges is preferred. The thesis is mainly focused on the design of bearing concrete structure.
|
|
|
Brick Building Reconstruction
Kolářová, Jana ; Bažant,, Zdeněk (referee) ; Šulák, Pavel (advisor)
This bachelor’s thesis is focused on reconstruction of brick apartment houses in terms of static load capacity. The thesis summarizes the requirements and information to evaluate the current state of brick buildings, contains both theoretical and practical calculations to assess the load capacity of masonry elements, and suggests possible measures for structures in unsatisfactory conditions.
|
|
|
Resistance of the roof structure loaded with photovoltaic panels
Holoubek, Jan ; Bažant,, Zdeněk (referee) ; Strnad, Jiří (advisor)
The aim of the thesis is to verify the resistance of the roof structure loaded with photovoltaic panels. On the roof of industrial building of rectangular plan with dimensions of 26,5 x 24,5 m in Hlinsko, the investor decided to install photovoltaic panels. Preliminary diagnostic survey showed only flexural reinforcement in the field of all considered load-bearing elements. Bending strength was assessed by these structural elements: reinforced concrete slab, reinforced concrete beam, reinforced concrete grinder. Static calculation includes a minimum reinforcement of support and necessary shear reinforcement, which must be demonstrated by a detailed diagnostic survey. The structural analysis includes the assessment of reinforced concrete beam deflection after loading. All assessments were performed according to currently valid Eurocodes. The calculation showed that all supporting elements meet the bending resistance and deflection of the beam is smaller than the limit value laid down in the EC, so the roof of the hall can be loaded with photovoltaic panels.
|
|
|
The roof structure of a multipurpose hall in Poděbrady
Houška, Daniel ; Puchner,, Josef (referee) ; Šmak, Milan (advisor)
The aim of this the bachelor thesis is a design of the supporting steel structure of the roofing for the multi-purpose sports hall in Poděbrady. Since a wide range of sports will be played in this sports hall, its layout and ground clearance are proposed accordingly. Prefabricated bleachers, which were not the solved in this thesis, will be part of the hall. Supporting facilities for the hall are located in the nearby buildings. It’s a single steel rectangular hall with a cylindrical roof. Curved beams were used as supporting elements. The beams will be filled with rods installed in a perpendicular system. For a structural analysis Sci Engineer 2011.1 was used. Selected elements were assessed by manual calculation.
|
|
|
Proposal and Design of the Flat Plate Slab
Ducháč, Josef ; Šimůnek,, Petr (referee) ; Švaříčková, Ivana (advisor)
The Bachelor´s thesis is focused on the analysis, design and assessment of the Flat Plate Slab. The Slab is located in multifunctional complex of winter stadium. All construction is made from reinforced concrete. The thesis solves various ways to create computational models. The thesis includes working-out of static calculation, drawing shape, reinforcement drawing of the Flat Plate Slab and the elaborate comparison with computational models.
|
|
|
Space structure of industry building object
Pelikán, Adam ; Švaříčková,, Ivana (referee) ; Šimůnek, Petr (advisor)
The subject of this project is the structure of the storage hall which is made of reinforced concrete. It is designed as precast frame (span of 18m), founded on pocket footings. The roof deck (non-rigid) consists of ribbed slabs. The cladding is made of sandwich panels (reinforced concrete and isolation) layed on foundation beam. The design is focused on the single typical frame. Roof girder, column and pocket footing are designed. Designed life of the structure is 50 years.
|
|
|
The calculation of existing slab bridge
Luliak, Ondřej ; Nečas,, Radim (referee) ; Klusáček, Ladislav (advisor)
Bachelor´s thesis is concrended with resistance simple bearing slab bridges. The main focuse is comparison diferents in resistance calculated according to ČSN valid between 1915 and 1935 compare with calculate resistance according to ČSN EN which is valid now. Next part is concrended serviceability limit state.
|
|
|
Load bearing structure of sport building object
Klodner, David ; Šulák,, Pavel (referee) ; Šimůnek, Petr (advisor)
This thesis is focusing on the design and assessment of reinforced concrete frame of the administrative part of the sports hall. In developing the computational model, the emphasis was on the comprehensiveness and reliability of an idealized structure, providing a economical design of elements. Assessment was conducted on the ULS and SLS for selected critical cross section - double staircase, ceiling slab, ceiling beam, the inner column and footings.
|
|
|
The roof structure of a multipurpose sport hall in Brno
Grussmann, Jan ; Pilgr,, Milan (referee) ; Šmak, Milan (advisor)
Bachelor´s thesis describes the design and static assessment of the main roof structure supporting elements of the multipurpose sport hall in Brno. It is the emphasis on the optimization of the proposal in terms of material consumption. Curved girders made of glued laminated timber and on the edge connected rafters forms together the cross-link structure. Basis of OSB sheathing carrying the roof deck is secured by the orthogonal grid system purlins and rafters. The static calculation also includes fire resistance reports of single elements.
|
guest ::
