National Repository of Grey Literature 45,639 records found  beginprevious45630 - 45639  jump to record: Search took 2.61 seconds. 

Process model of information system maintenance
Pavlas, Petr ; Pícka, Marek (advisor) ; Mikoláš, Mikoláš (referee)
The thesis is dedicated to the modeling of processes related to the operation of information systems. The theoretical part deals with the operation of information systems in the context of the general methodology for IT services and procedural framework ITIL for service management in IT services. The following part focuses on overview of the basic principles for process modeling and brief characteristics of selected modeling methodologies and notations. Theoretical assumptions are applied in the practical part of the thesis, in which BPMN notation through using the software tool ARIS Express are assembled general models of identified key processes associated with the operation of an information system according to the procedural framework ITIL.

The statistical analysis of wages development in Ústecký Region and its expected tendencies
Procházková, Zdeňka ; Prášilová, Marie (advisor) ; Luděk, Luděk (referee)
This masters thesis deals with the issue of development of wages in Ústecký region. In the theoretical part are explained key terms and categories in the area of wages. In the practical part, wages are discussed in Ústecký region in the years 2004 to 2015 and based on CZ-NACE classification in the years 2005 to 2014. For each time series, elementary statistical characteristics, and trend functions suitable for establishing future development and predictions for the next two years are established.

Foreign direct investments and their impact on the Czech Republic
Klugová, Kateřina ; Burian, Stanislav (advisor) ; Milan Robin, Milan Robin (referee)
The theoretical part of the dissertation is dedicated to the balance of the payments as well as to the theory of the direct foreign investments with the linkage to new methodology of the balance of the payments. The determinants of the direct foreign investments are consequently introduced in the economic theory. The attention is to the higher extent dedicated to the industrial and territorial break-down. The incentive system and the Agency for the support of incoming direct foreign investments (CzechInvest) are described and introduced in the connection with the system functioning in Czech Republic. The incoming direct foreign investments in the period from 2004 to 2014 are analyzed in the second part of the dissertation. The time series were set up on the basis of the annual reports and the databases of Czech National Bank; the evolution phases of direct foreign payments is consequently analyzed with the regard to the respective industries and territories. The development of the direct foreign investments and their impacts on Czech Republic is assessed in the conclusion of the dissertation. It is concluded that the development of the incoming direct foreign investments is in a close correlation with the economic situation in Czech Republic and neighboring countries. The dissertation confirms that the economic and also non-economic factors of each country are key determinants for the final level of the incoming direct foreign investments.

Mass Spectrometry Imaging of Metformin in Tissue Sections
Strnad, Štěpán ; Sýkora, D. ; Vrkoslav, Vladimír ; Cvačka, Josef ; Maletínská, Lenka ; Pirník, Zdenko
Mass spectrometry imaging is a powerful technique suitable for visualization of the distribution of a wide variety of compounds within tissue sections. The main aim of the study was the development and optimization of a sample preparation procedure allowing determination of the distribution of orally dosed metformin in mice kidney sections. Metformin is the first-line medication for the treatment of type 2 diabetes. The optimization of the sample preparation step before imaging experiments included the selection of a suitable matrix and the optimization of various parameters of MALDI analysis. 2,5-dihydroxybenzoic acid was identified as the best matrix providing highest sensitivity. A sublimation method was successfully used for the matrix deposition. The highest relative concentration of metformin was found in the inner zone of kidney 30 minutes after the drug administration.

Models and tools for validation of biodiversity in the Dřevnice catchment
Cudlín, Ondřej ; Pechanec, V. ; Štěrbová, L. ; Cudlín, Pavel
We use several GIS tools to assess and predict the changes in biodiversity in the Dřevnice catchment. First,\nwe created GIS layer, consisted of natural and near to nature habitats (system Natura 2000) and Corine\nLand Cover for more anthropically influenced habitats. The Land Change Modeller was used to predict the\ndevelopment of land cover on the basis of comparison of data in several historical periods. To determine\nthe areas with high threat to biodiversity we created firstly another GIS layer of habitats with low\nnaturalness. Afterwards we used the model GLOBIO 3, which works with five basic driving forces (habitat\nnaturalness, infrastructure presence, distance from communications, nitrogen pollution load and\nmodelled climatic change parameters). GLOBIO 3 uses for each layer the MSA indicator (mean species\nabundance per area), which reflects the worldwide threat to selected endangered species. With regard to\nthe conditions of the Czech Republic and non‐availability of the nationwide database of finding data on\nprotected plant and animals, we should change this indicator for MHV (mean habitat value per area). Last\nGIS layer enables us to select up to now unprotected areas with a high value of biodiversity and naturalness of habitats for environmentally friendly agriculture and forestry management by model Marxan. The model combines the existing categories of natural reserves, biodiversity values (expressed in CZK according to Biotope Valuation Method) and the penalty for any nature degradation due to inadequate protection, abundance and distribution of species of interest (in this case the valuable and\npreserved habitats). Simultaneously it aims for a spatial compactness of design. The output is a layeridentifying the refugia for preservation and spreading of wild plants and animals to the cultural landscape,\nespecially with regard to climate change.

On the recirculation zone suppression behind HUMP profile using the DBD actuator
Procházka, Pavel P. ; Uruba, Václav
Previously, the DBD (dielectric barrier discharge) plasma actuator was used in rectangular channel to modify the properties of the boundary layer in spanwise and in streamwise orientation. The actuator was redesigned for using on the surface of the Glauert-Goldschmied body in different position to influence the point of the separation and the reattachment point as well as the total extent of the separation bubble. The most intensive effect occurs when the actuator takes effect in the point of separation. Further downstream, the ionic wind produced by DBD causes complex coherent structures in the wake for spanwise orientation in both direction. The effect of streamwise orientation is studied also. Actuator is operated in steady regime to produces continuous ionic wind as well as in unsteady regime when the vortex street is generated. The properties of vortex street is given by modulation parameters (frequency and duty cycle). The effect of these parameters on the wake is evaluated. This experiment is realized in the perspex channel connected to the blow-down wind tunnel. The HUMP profile is flush-mounted to the bottom side. The wire electrode of the actuator is situated in x/L = 0.63, 0.66, 0.69 and 0.72 of the chord length. The time-resolved PIV (Particle Image Velocimetry) is used as a main measurement technique. The flow field behind the profile is captured in longitudinal plane as well as in cross-section planes using 3D PIV. The results based on statistical quantities will be presented in this paper. More, next part will be devoted to the decomposition analysis of the flow dynamics (BOD, OPD).

Selection of the most suitable international market for Logio expansion
Ščuková, Diana ; Král, Petr (advisor) ; Vokáč, Matěj (referee)
The master thesis deals with the possibilities of international expansion in case of the Czech company Logio s.r.o that sells consulting services on B2B market. The main objective is to choose a suitable international market for expansion of the company. Futhermore, market analysis and determination of method of market entering are additional objectives of the thesis. The first part deals with the characteristics of the process, which companies should follow during selection of international market, and various forms of entrance. Then, gained findings are used in process of selecting the most suitable international market for expansion of company Logio s.r.o. Selected market is analysed by using Porter model of 5 forces and PESTEL analysis. The variants of international expansion are specified and compared in the end of the thesis and the most suitable method of market entering is chosen with regard to specifics of the company itself.

Bonduelle launch a new product on the Czech market
Černohorská, Karolína ; Vávra, Oldřich (advisor) ; Hanousková, Kristina (referee)
The thesis is focuse on contemporary brand marketing, which these days is increasingly facing with oversupply and increasing competition. More than ever before, marketing is becoming the most important components of the company management, especially in FMCG companies. In the theoretical part I deal with the key concepts of marketing and describe in detail the marketing and the communication mix of B2C companies. I will get to the topic of brand marketing and the areas associated with it, such as marketing research, marketing and communications strategies based on business objectives. In the practical part the reader will get a chance to see the detailed proces of new product launch onto the Czech market within the canned vegetables segment and the retail chain. In the first half I will describe the product launch and the steps taken with regards to communication. I will describe the current market trends within the pickled vegetable´s market and the development of competitive brands, especially the problem of the growing influence of private labels. The second part will describe the communication mix of the launched novelty and the proposed changes based on the findings. At the end I will propose the new ATL support for the novelty

The impact of realization investment on company management
Dlouhá, Lucie ; Kozáková, Petra (advisor) ; Pevná, Jana (referee)
The subject of the thesis is evaluation of a biogas station activity and its impact on the entire economy. The theoretical part describes the basics of biogas station functioning and legislation to construct and operate biogas station. Then it focuses on investment theory where basic methods of evaluation of economy efficiency and chosen ratio indexes of financial analysis for company´s evaluation are summerized. In practical part, the methods analyzed in the theoretical part are employed for specific details found in AGROSPOL STARÝ PELHŘIMOV Inc. The outcome of the thesis is a complex summary of impacts of a biogas station construction. Key words: biogas plant, company´s economy, economic efficiency of investment.

Posouzení interní metodiky testování na konkrétním projektu a návrh vylepšení
Hofrichterová, Kateřina ; Bruckner, Tomáš (advisor) ; Kodym, Oldřich (referee)
The thesis is focused on testing the banking software. The first part is contained introduction to the topic, introduced the project, including its objectives, the nature of the application, my role in it. Further described is a method Case study used throughout the work. The company is a researcher of the project for the client. The first objective is to describe the company's testing methodology by which the project progressed during, compare it with other methodologies with regard to their robustness, the degree of organization of work and domestic allocation. The second objective is to determine the bottlenecks including the determination of improvement. Each project is unique, so is suitable, another degree of organization. A control method of the project is agile. It is therefore expected framework anticipating complications and subsequent resolution of other areas to occur. The work defines the cause bottlenecks as the internal factor (human labor), external factors (legislative changes). Mapped was not only the current situation but also outlined the cause of the problem. And the third in terms of value-added most important goal is to design verification solutions experts. At work I described ways of solving problems. I woke them both employees solver side, so people from client companies. Experts from the client know good practices in the company and are able to assess the suitability due to the nature of society. Collaborators supply side, meanwhile, have extensive experience from similar projects. Their opinion on the issue can bring effective application of the Recommendation. The biggest benefit is not only the approval but also the subsequent implementation in the course of the entire project.