|
|
Prestressed bridge in Velké Pavlovice
Stloukal, Radim ; Růžička, Stanislav (referee) ; Koláček, Jan (advisor)
The subject of this thesis is to design a bridge construction over the river Trkmanka in the municipality Velké Pavlovice. The superstructure is designed as a prestressed one field slab bridge with the length of 16,85m. As a part of this thesis there is enclosed structural analysis calculated accordingly to ČSN EN 1992-1-1. The load effects were calculated by Scia Engineer and compared with manual calculation. The rest of the calculations are done manually and ocassionally compared to engineering software. The construction has been analysed for the ultimate limit state, serviceability limit state and the stress anchors have been designed.
|
|
|
Static analysis of reinforced concrete floor structure of historical building
Nani, Pavel ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
The chief objective of my bachelor’s thesis is a design of the reinforced concrete floor structure of a historical building over 1st floor. The historical building was built in 1874. There are three floors in this building and there isn’t any underground floor. The reinforced concrete floor structure consists of the following forms of structure – a ribbed ceiling, a floor slab, a beam, a shell of vault and a staircase. The ribbed ceiling is made from a lost formwork of the VELOX firm. The set reinforced concrete floor structures are according to ČSN EN 1992-1-1.
|
|
|
Design of a one-span beam bridge
Fojtů, Jan ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The aim of the thesis is a safe and economical design of a bridge over a watercourse according to all valid regulations and standards. There were designed three possible options in accordance with the recommended dimensions. The variation with the cross-section that consists of two beams and effective width of flanges is preferred. The thesis is mainly focused on the design of bearing concrete structure.
|
|
|
The local road bridge
Janek, Tomáš ; Panáček, Josef (referee) ; Klusáček, Ladislav (advisor)
The bachelor´s thesis deal with a design and assessment a one-span girder bridge. The girder bridge is made of prestressed concrete. The aim of the bachelor´s thesis is to design and assess supporting structure to the specified load.
|
|
|
Brick Building Reconstruction
Kolářová, Jana ; Bažant,, Zdeněk (referee) ; Šulák, Pavel (advisor)
This bachelor’s thesis is focused on reconstruction of brick apartment houses in terms of static load capacity. The thesis summarizes the requirements and information to evaluate the current state of brick buildings, contains both theoretical and practical calculations to assess the load capacity of masonry elements, and suggests possible measures for structures in unsatisfactory conditions.
|
|
|
Proposal and Design of the Flat Plate Slab
Ducháč, Josef ; Šimůnek,, Petr (referee) ; Švaříčková, Ivana (advisor)
The Bachelor´s thesis is focused on the analysis, design and assessment of the Flat Plate Slab. The Slab is located in multifunctional complex of winter stadium. All construction is made from reinforced concrete. The thesis solves various ways to create computational models. The thesis includes working-out of static calculation, drawing shape, reinforcement drawing of the Flat Plate Slab and the elaborate comparison with computational models.
|
|
|
Space structure of industry building object
Pelikán, Adam ; Švaříčková,, Ivana (referee) ; Šimůnek, Petr (advisor)
The subject of this project is the structure of the storage hall which is made of reinforced concrete. It is designed as precast frame (span of 18m), founded on pocket footings. The roof deck (non-rigid) consists of ribbed slabs. The cladding is made of sandwich panels (reinforced concrete and isolation) layed on foundation beam. The design is focused on the single typical frame. Roof girder, column and pocket footing are designed. Designed life of the structure is 50 years.
|
|
|
Load bearing structure of sport building object
Klodner, David ; Šulák,, Pavel (referee) ; Šimůnek, Petr (advisor)
This thesis is focusing on the design and assessment of reinforced concrete frame of the administrative part of the sports hall. In developing the computational model, the emphasis was on the comprehensiveness and reliability of an idealized structure, providing a economical design of elements. Assessment was conducted on the ULS and SLS for selected critical cross section - double staircase, ceiling slab, ceiling beam, the inner column and footings.
|
|
|
The roof structure of a multipurpose sport hall in Brno
Grussmann, Jan ; Pilgr,, Milan (referee) ; Šmak, Milan (advisor)
Bachelor´s thesis describes the design and static assessment of the main roof structure supporting elements of the multipurpose sport hall in Brno. It is the emphasis on the optimization of the proposal in terms of material consumption. Curved girders made of glued laminated timber and on the edge connected rafters forms together the cross-link structure. Basis of OSB sheathing carrying the roof deck is secured by the orthogonal grid system purlins and rafters. The static calculation also includes fire resistance reports of single elements.
|
|
|
Reinforced concrete frame construction
Duda, Tomáš ; Strnad,, Jiří (referee) ; Koláček, Jan (advisor)
The bachelor’s thesis describes the design and assessment of the load-bearing part of the reinforced concrete structure of the department store – the frame. Respectively design and assessment of individual structural elements of the this frame at ultimate limit states. This is a rung frame R1, column S1, footings P1 and floor plate D1 above the first floor of this building.
|
guest ::
