|
|
Dynamics of Machines and Mechanical Systems with Interactions, DYMAMESI 2021
Zolotarev, Igor ; Pešek, Luděk ; Kozień, M. S.
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, hydro-elasticity, biomechanics, systems with feedbacks and mechatronics. The colloquium DYMAMESI 2021 is cofunded by the Strategy AV21 initiative of the Czech Academy of Sciences of the Czech Republic, and in 2021 will be hosted by Cracow University of Technology, Institute of Applied Mechanics, Section of Dynamics of Systems.
|
|
|
Vibration analysis using a mobile phone accelerometer
Robek, Tomáš ; Huzlík, Rostislav (referee) ; Zuth, Daniel (advisor)
The bachelor thesis deals with the question whether or not measurements of vibrations can be taken with a mobile phone. For that purpose I made an experiment to compare data measured with a mobile phone and data measured with professional gauging equipment. I also focused on finding the most commonly used accelometer in mobile phones as well as on finding and comparing suitable mobile apps for recording vibrations with mobile phones.
|
|
| |
|
|
Design of machining process diagnostic system
Wolf, Jonatan ; Klapka, Milan (referee) ; Houfek, Lubomír (advisor)
The master’s thesis is focused on online diagnostics of the machining process. In the theoretical part are presented maintenance possibilities of machine tools. A whole chapter is devoted to vibrodiagnostics, which describes vibration sensors, their attachment to the measured object and methods of vibration signal processing. The practical part lies in creating a software diagnostic solution for chosen PLC and sensors. The functionality of the proposed system was verified during experimental machining, which also provided valuable data for the correct setting of the system.
|
|
|
Diagnostic system of paper machine
Škrobánek, Martin ; Jankových, Róbert (referee) ; Zuth, Daniel (advisor)
This master thesis deals with the technical diagnostics, focusing mainly on vibration diagnostics. This problematice is described in the first part of this work on a theoretical level. The next part describes the paper machine, diagnostic system and the measuring points are classified into databases. The practical part of this work consists of a proposal for the methodology of vibration diagnostics for a paper machine, the procedure for measuring and evaluating the measured values. Part of the work is also a practical example of the measurement of the central cylinder, on which the procedure is tested, and the compilation of new limit values.
|
|
|
Online diagnostics of machine tool MCV 754
Rázgová, Benedikta ; Huzlík, Rostislav (referee) ; Zuth, Daniel (advisor)
This master’s thesis deals with online diagnostics of the machine tool and marginal analysis of surface texture. The first part of the thesis deals with problems theoretically, there are described the machine tools, maintenance, methods of technical diagnostics, specifically online vibrodiagnostic systems and an overview of profile and area parameters. In the practical part, two test samples created under ideal and degraded conditions. In the practical part, two signal processing processes under ideal and degraded conditions are compared using signal analysis from an online vibrodiagnostic system and surface texture analysis. Part of the work is the evaluation of the performed analyzes and recommendations for practice.
|
|
|
Multiparametric generator diagnostics
Buchtová, Blanka ; Nahodil, Petr (referee) ; Hammer, Miloš (advisor)
The thesis is focused on multiparametric diagnostic of generators at the Dukovany nuclear power plant. One generator was chosen for the thesis and it was examined especially from the practical point of view. The thesis describes current state of the issue with focus on noise diagnostics, vibrodiagnostics and electrodiagnostics. The emphasis is on the system approach of the solution. In the practical part an experiment is designed, described and evaluated. Attention is paid to the conclusions of the performed vibrodiagnostics and noise diagnostics. Data sets are evaluated separately and the relationship between the two diagnostic methods is analyzed. Furthermore, the data set from electrodiagnostics is evaluated and dependencies of electrical diagnostic quantities on other quantities are described. Trends in electrical diagnostic quantities are also monitored. Conclusions and recommendations are formulated at the end of the thesis. It is stated that using multiparametric diagnostics to assess the status of generators in power plants is still in its beginning and that the conclusions of the submitted thesis will contribute to the developmnet in this area.
|
|
|
Multiparametric diagnostics of high-speed machine
Bowyer, Matouš ; Harčarík, Matej (referee) ; Jankových, Róbert (advisor)
The goal of the thesis was applying multiparametric diagnostics to determine the state and wear of a high-speed milling machine. In the theoretical section, selected areas of multiparametric diagnostics have been described as well as a significant focus on vibrodiagnostics. The chosen methods for the practical section were incorporated into the group “metrological diagnostics”. Several different types of measurements have been performed on the designed test piece. The measurements were analyzed and lead to these specific results: a drawing of the test piece, a structured methodology for evaluating the test piece, recommendations for diagnostics of the specific machine, and proposals for the future development of the field of metrological diagnostics.
|
|
|
Indirect vibration analysis using a mobile phone microphone
Plodková, Zuzana ; Huzlík, Rostislav (referee) ; Zuth, Daniel (advisor)
The bachelor thesis deals with the possibility of using a recorded signal from a mobile phone for vibration analysis. The first half of the thesis is a research generally dedicated to microphones, microphones in mobile phones and technical diagnostics. The chapter about microphones discusses the principle of their operation, further it analyzes the most important technical parameters and finally divides microphones according to their construction. In case of microphones in mobile phones there is mentioned the most commonly used type of microphone and its structure including a description of possible sound filtration. Possible ways and approaches to processing the measured signal are mention in the chapter abou technical diagnostics. The second part of the thesis is devoted to repeated measurement and subsequent processing of measured values. An evaluation of efficiency of the method of measuring the signal with a mobile phone for vibration analysis by comparison with the results obtained by a professional measuring technique follows.
|
|
|
On-line diagnostic monitoring systems for vibration of machines
Cirhanová, Iva ; Prostredník, Daniel (referee) ; Hammer, Miloš (advisor)
The bachelor thesis deals with diagnostic monitoring systems of machine vibration. First of all, a technical diagnosis with a focus on diagnostic methods, means and diagnostic systems is generally described. Special attention is paid to vibrodiagnostics and termodi-agnostics. In the next part of the thesis there are on-line diagnostic monitoring systems, their parameters and their use in technical practice. Emphasis is placed on systems from SKF, ADASH and ifm electronic. The systems are compared and the economic aspect is briefly outlined. In the bachelor thesis is also evaluated.
|
guest ::
