|
|
Inorganic fillers effect on electrical properties of the epoxy resins
Doležel, Tomáš ; Jirák, Josef (referee) ; Frk, Martin (advisor)
This thesis deals with problems of electrical insulation materials based on epoxy composites used in the electronics industry. This thesis is divided into theoretical part focused on composite materials, their technological processing and diagnostics. It also describes dielectric materials, their properties and events taking place in their structure. The experimental section describes the measurement of electrical properties of samples of electrical insulating materials with different types of fillers.
|
|
|
Technological stage of Siding of a Block of Flats
Kasza, Radomír ; Ing.Lukáš Kopecký (referee) ; Diaz, Yvetta (advisor)
Bachelor thesis solves the construction and assembly phase of the technological envelope of a residential building in the Český Těšín. Includes integrated parts for the implementation of this phase. Includes the plan of tests and controls, technological standard, plan of the risks, financial plan and timetable. In addition, an inventory of machines and principles of organization development.
|
|
| |
|
|
Study of the properties of fillers to the composites requiring high temperature resistance
Vovesný, Václav ; Gross,, Tomáš (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on the behaviour of natural and synthetic aggregates and their behaviour in polymer – cement composites, while being exposed to high temperature. The processes, happening in aggregates and mortar under the thermal load, were described in the theoretical part of the thesis same as the testing of heat effects on the aggregates and mortar. Further, the influence of high temperature on each component of concrete was described, followed by the suggestion of the appropriate components for concrete exposed to high temperature. Various aggregates were tested in the experimental part of the thesis. The basic physical and mechanical properties of aggregates were examined same as their mineralogical composition with using XRD, DTA and SEM methods. At the mortar, the influence of high temperature on the concrete density, compressive strength and tensile strength was defined. The gained knowledge was evaluated in the final part of the thesis
|
|
|
Development of a thermal insulating material designed for use with high temperature
Dokoupil, Martin ; Frajt, Daniel (referee) ; Drochytka, Rostislav (advisor)
The work deals with the development of a new thermal insulation material that contains a secondary raw materials or waste. It is an insulating material with the requirement of resistance to high temperatures - 200 ° C and 500 ° C. Type of material is determined by the way of reducing density - direct and indirect. Direct is achieved by adding lightweight aggregates, indirect is achieved by gas evolution through chemical reaction and the subsequent incorporation of gas into the structure of the material. This thesis is part of the MPO TIP č. FR-TI 2/340 project.
|
|
|
Development of Resistant Coating Systems Based on Polymer Binders
Voráčová, Veronika ; Vyhnánek, Miroslav (referee) ; Petránek, Vít (advisor)
The aim of the thesis is to propose the use of waste materials as filler for the selected coating systems used for chemical protection of concrete surfaces.The used filler could not affect the existing binder of the coating system. Research was conducted using two materials N141 and N 121. The waste material was chosen by his chemical and physical properties. Between suitable materials belongs slag, fly ash, foundry sand and glass waste. The selection based on Lena Chemical s.r.o companies request was selected glass waste. The practical part includes examination as fillers, and the corresponding tests for coating systems with pre-used filler. Finally, the assessment of the suitability of the materials used.
|
|
|
Heat insulating moulded refractory concretes
Bednárek, Jan ; Bartoníčková, Eva (referee) ; Šoukal, František (advisor)
The thesis deals with the possibility of specific weight lowering of kaolin suspensions using air-entraining agents. These agents are usually used as concrete admixtures. The goal of the thesis is to verify an alternative possibility of creating porous structure in kaolin suspensions in order to prepare heat insulating moulded refractory concretes without using lightweight fillers. The effect of several air-entraining agents was compared, after that the dosage of agent and mixing conditions were optimized. The stabilization of prepared foams and practical application of selected agents were also part of the thesis.
|
|
|
Optimization of interfaces in filled dental composites
Gavroňová, Ivana ; Bystřický, Zdeněk (referee) ; Přikryl, Radek (advisor)
The bachelor's thesis deals with the particulate composite materials, especially dental composite materials and their properties, production methods and possible adjustments in either the particles themselves as a filler or modification of the interface between the filler and the matrix. In this bachelor's thesis also examines testing properties of particulate composite materials.
|
|
|
Mosaic geopolymeric thin-film plasters for decorative applications
Svidroňová, Barbora ; Šiler, Pavel (referee) ; Šoukal, František (advisor)
This bachelor thesis deals with preparation of mosaic geopolymeric plasters, used fillers and it observes their influence on the final properties of geopolymeric plaster. The aim of the study is the selection of proper raw materials for filler, the determination of optimal filler-to-sand ratio and the preparation of plaster with proper shade of colour. In experimental part, during the detection of adequate ratio of raw materials, there were prepared beams from several types of metakaoline, sand, water and water glass. The beams were tested for compressive strength and bending. The blasters themselves were watched for their applying, hardness, shades of colour and efflorescence.
|
|
| |
guest ::
