|
|
Simulation of cutting force during milling process with straight tooth plain milling cutter.
Zemčík, Tomáš ; Sedlák, Josef (referee) ; Zemčík, Oskar (advisor)
To make a simulation of cutting force during milling process with cilindrical cutter is the aim of this diploma thesis. Preliminary part is devoted to technology of milling, milling cutters and cutting materials. The next section is aimed at kinematics of the cutting process, a theoretical analysis of power proportion, the possibility of measurement of force actions. General information about the programming software, a theoretical simulation model, graphical environment of created application, are the other points of this diploma thesis. The work also includes evaluation of the experimentally measured values and compared with values obtained from the created application.
|
|
|
Production technology for part of metal cuting machine.
Kachyňa, Stanislav ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
This thesis deals with design for manufacturing technology single part on machine FS, which is the connecting part. Work deals with the material of this component, therefore, cast iron with lamellar graphite, the properties of this material, primarily focusing on the machinability. Due to the shape and dimensions of the workpiece is also described problems cutting of box parts, the most common operations used in their manufacture, including cutting tools and materials. These findings are then applied in terms of the company TOS Kuřim - OS a.s. An analysis of current manufacturing technology and design is made for its amendment. In conclusion with the technical-economic evaluation.
|
|
|
Technology project for non-rotary (plate) parts production
Henzl, David ; Horák, Jaroslav (referee) ; Rumíšek, Pavel (advisor)
The aim of the thesis is to elaborate the technological project for non-rotary (plate) parts production based on requirements of TOS KUŘIM – OS, a.s. The literary studies from the area of machining technology and technological designing are in the first part of the thesis. The evaluation of the contemporary state of production and dividing of products into groups is made in the next part. The following part of the thesis is dealing with the design and analysis of designed variants of disposition, choosing the most suitable variant, its optimalization and evaluation by the help of capacitive calculation. The drawing documentation (material flow included) and technoeconomic evaluation is elaborated in the final part of the thesis.
|
|
|
Cutting performance of very fine grained end mills
Uttendorfský, Aleš ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
This diploma thesis consists of two parts. The theoretical part describes sintered carbides, their properties and manufacturing tools. Some selected problems of milling and its physical nature is discussed also. It also deals with the types and methods of tool wear testing. The aim is to compare the experimental properties of monolithic end milling cutters (short four cutting edges, uncoated carbides) of various grain sizes in two basic ways of milling - down-feed method and up-feed method. The measured values are evaluated by analysis in time series of the cutting forces and power.
|
|
|
Cutting Tools for Production of Weapon Parts
Hanus, Vladimír ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
his Diploma thesis concentrates on problems related to cutting tools, their wear, durability, and cutting conditions. The work provides basic analysis of technology applied to two selected parts. Further, there is also analysis of cutting tools suppliers. The work gives brief characteristics of the basic types of wear and their origins. In the experimental section is a statistical evaluation of selected tools, calculation of optimal cutting conditions and durability, and finally selected tools wear evaluated. The technical and economical evaluation compares cutting conditions provided in theory with the real cutting conditions.
|
|
|
Enhancement of HSS tools cutting performance with PVD coatings
Medek, Martin ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
Diploma work describes speed drill steels and its qualities before and after coating by methods PVD (Physical Vapour Deposition). The theoretic part is concerned with thermic processing of speed drill steels and their qualities with regard to individual alloying elements contained and its mechanical features. Second part of the theoretic part is concerned with particular methods of coating by the help of PVD technologies, kinds of coating with regard to additional elements and their qualities and surface treatments of coated material before and after its coating. The goal of the experimental part was the confrontation of cutting power features of cylindrical four-fluted face mills with straight shank, from speed drill steels non-coated and coated in two basic modes of milling – down-feed method and upfeed method. The results of measurements were interpreted by the help of four basic pictures (source values, power analysis, specific values). The result of all the experiment is that the application of PVD coatings enabled the increasing of cutting speed (with preservation of other cutting requirements) and led to decreasing of cutting force and cutting enforcements and extended durability of cutters.
|
|
|
Cutting forces when milling fibre reinforced composites
Martének, Libor ; Forejt, Miloslav (referee) ; Humár, Anton (advisor)
The thesis is focused on composite materials with a view to their classifi-cation, identification, usage, current trends in production and development and possibilities of effective machining. As a part of this thesis, there is an evaluation of experimentally measured values during technological testing of milling of a fibre reinforced composite with a polyester matrix reinforced by fiberglass. The technological testing was performed with a view to measure certain values, i.e. impact on machined material, working conditions for a tool and its abrasion equal to the values of components of cutting force. From the values obtained from the testing, a general analysis of cutting force when milling was created containing overall technical and economical evaluation.
|
|
| |
|
|
Acrylic glass base production to gramophone deck
Bezděk, Filip ; Zouhar, Jan (referee) ; Kalivoda, Milan (advisor)
This thesis is aimed at a very detailed process of a transparent plexiglass used for manufacturing an upstand of a gramophone. The diploma work is mainly focused on various types of the plexiglass, its attributes and the gramophone’s upstand production. Several manufacturing technologies of a plexiglass such as division of a board-type semi product, precise milling, grinding, polishing and thermal treatment are provided in this diploma work through a very detailed description of a production process of a gramophone’s deck. The outcome of this thesis is a description of individual technologies and the economic evaluation within the real business environment of AZ Plastik company.
|
|
|
Milling of axial groove in rotary turbine
Káčer, Pavel ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
The aim of this work is comparison of special form tools for manufacture of grooves in rotor turbine. For this purpose tools are chosen from „A“ and „B“ company. Form milling cutters are confronted both in terms of their characteristic features, manufacturing methods, and time and economy intensity. Furthermore, there is described a possible future way of grooves‘ production through the use of the „C“ ‘s programme. Apart from that, this thesis also involves simple programme for comparing the chosen parameters.
|
guest ::
