|
|
Design of a two-axis multi-spindle lathe carriage
Sedlář, Jiří ; Štěpánek, Vojtěch (referee) ; Hadraba, Petr (advisor)
This diploma thesis deals with the design of a two-axis multi-spindle lathe carriage. In the first part, there is made a research, and its aim is to find possible variants of design solutions. After the best rated variant was selected, the thesis further continues with the necessary technical calculations of the main design nodes such as a synchronous servomotor, ball screw, linear guide and bearing. The design itself was carried out with regard to calculations and the resulting model was examined in terms of dynamic stability. The subject of examination was to find the natural frequencies of the assembly and to determine the amplitudes of the oscillations which arise from the harmonic excitation force. Finally, Lobe diagrams for grooving and longitudinal turning operations were drawn.
|
|
|
Design of small hobby CNC milling machine with fixed table
Hanzal, Jiří ; Marek, Tomáš (referee) ; Pavlík, Jan (advisor)
The topic of this work is the design of a small model CNC milling machine with a fixed table for machining wood, plastic, or light alloys (Al, Zn, etc.). It also includes a calculation report and drawing documentation of selected nodes. The beginning of this work consists of an introduction to the issue of milling machines, their distribution and subsequent market analysis. Subsequently, the input parameters are designed on the basis of market analysis and in the last part there is a calculation report, the design of the milling machine itself and a short economic evaluation.
|
|
|
Konstrukce obráběcího stroje pro CNC frézování
Novák, Tomáš
The bachelor thesis contains the design of the CNC machines for milling, which is described in the first part. The search serves to select suitable components for machine design. The second part deals with the design of the CNC milling machine for woodworking.
|
|
|
Hobby CNC milling machine design
Buš, Martin ; Pavlík, Jan (referee) ; Marada, Tomáš (advisor)
This master thesis is focused on design of CNC hobby milling machine.In the first part of master thesis there are brief information about construction of CNC milling machines with varios types of milling machines available on market. After that, is made a selection of suitable machine componets for selected parameters. Futhermore, the masters thesis include a solutions of the component on all axes CNC milling machines.
|
|
|
Positioning of the tilting head of a milling multi-purpose machining center with a horizontal spindle axis
Grepl, Martin ; Marek, Tomáš (referee) ; Marek, Jiří (advisor)
The thesis deals with the positioning of the tilting head of the multifunctional milling centre in three axis. The aim of the thesis is to design a multifunctional milling machine centre with a horizontal axis of the spindle in cooperation with Bc. Ľubomír Vazovan, Bc. Ján Rapčan a Bc. Tomáš Hynšt, who are working on the issues of the headstock, automatic tool change and palletization. The thesis also contains proposals of certain options and their subsequent evaluation by the multicriterial method PATTERN. The resulting construction is complemented by calculations of the main construction nodes.
|
|
|
The design of inverse pendulum
Kukla, Ondřej ; Zapletal, Tomáš (referee) ; Strecker, Zbyněk (advisor)
This thesis deals with design of inverted pendulum and experimental prove its functionality. Design was made in MATLAB Simulink software and experiment meant that pendulum can turn about 360°. In this thesis is described functional device which meets all asked requirements. There is also described process of design and construction of inverted pendulum which is the main benefit.
|
|
|
Energetic model of linear axis with ball screw and servodrive
Sládek, Vojtěch ; Tůma, Jiří (referee) ; Huzlík, Rostislav (advisor)
The aim of the thesis was to study the Energy Models of Linear Axes with Ball Screws and Servo Drives, to analyze the individual parts of the axis with respect to losses, the methodology of calculating the losses on the electrical part and the mechanical part of the drive and creating a complex algorithm that calculates the energy consumed for the specified motion. The thesis is divided into a theoretical and practical part, where the theoretical part is divided into the treatise on the electrical part of the axis and its losses and the part that deals with the mechanical part and its losses. The calculation is divided into the basic verification algorithm and the calculation on the given example. Each calculation is calculated for both linear acceleration and S-curve acceleration. For both types of acceleration, the result of energy and its course over time is also the waveforms of position, velocity, acceleration, angular acceleration, moments, powers, power, speed and currents over time.
|
|
|
Design of a headstock for a machine tool
Sehon, Tomáš ; Marek, Jiří (referee) ; Hermanský, Dominik (advisor)
This master’s thesis deals with design of a headstock for a machine tool. Theoretic part of this thesis provides basic description of a horizontal machine tool. Further it is dedicated to description of a headstock of machines with extensionable work spindle. In a design part firstly optimal variant is chosen by using multicriterial analysis. Necessary calculations were done and chosen variant was developed. Design is realised by 3D CAD model and drawing documentantion.
|
|
|
Design and analysis of the cross table
Zemčík, Matěj ; Pavlík, Jan (referee) ; Tůma, Jiří (advisor)
This thesis deals with the design of the cross table. That is, designing a linear guide, a ball screw and a motor. In addition, dynamic simulations are used in the MSC Adams for machining cycle and the positioning cycle of the semi-product at rapid traverse. As a simulation output are the „real“ load patterns of the bearings in the placing of the ball screws and the durability of these bearings.
|
|
|
Design of linear axis for heavy machine tool
Göbel, Lukáš ; Marek, Jiří (referee) ; Hermanský, Dominik (advisor)
The content of this thesis is the description the various component of the linear feed axis, which are used in heavy duty machine tools. This describes their features, advantages and disadvantages and on these basics, are selected different appropriate design variants. In the second part of this thesis has been drawn up constructional design of these variants. They were subsequently compared and then was chosen the most ideal one for the designed machine, which is heavy machine tool upper gantry type. The work also includes the 3D CAD model of the final version and drawing documentation.
|
guest ::
