|
|
Machining of hard-to-machine materials by turning
Švorc, Josef ; Fiala, Zdeněk (referee) ; Píška, Miroslav (advisor)
The thesis is focused on machining of hard-to-machine materials. In the theoretical part hard-to-machine materials are divided and characterized. Furthermore, the thesis specifies hardened steels and their heat treatment, machinability and mechanism of wear and chip formation. There are tool materials and their classes suitable for machining hardened steels. The practical part deals with the influence of the cutting conditions on the roughness of the machined surface when turning hardened steel.
|
|
|
Machining processes in furniture industry
Černý, Marek ; Kalivoda, Milan (referee) ; Chladil, Josef (advisor)
This master thesis deals with machining processes in the furniture industry. Various group of materials, which are used in furniture industry are described there. Then there are described assembly and machining processes, such as manual and machine. In practical part, the production process for the selected sample product was proposed. The production was performed in a specific company, which has suitable machinery and tools. Sample product was made from double-sided laminated medium density fibreboard, which belongs to the group of wood-based materials. As a part of the debugging produciton process, the dependence tool life at cutting speed was experimentaly found. The experiment was performed on CNC milling machine with cutting speeds in the range 453 to 905 m.min-1, width draft of cutting edge 9,5 mm and feed per tooth 0,05 mm. Analog passametr Somet with an accuracy 0,001 mm was used to measure tool wear. The measured data were recorded and evaluated in program Excel. The resulting dependency tool life at cutting speed can be used in other machining operations. After performing the experiment, each parts of the product were produced and mountig was performed. The conclusion of the thesis contains an evaluation of the proposed production process.
|
|
|
Design of spindlespeeder
Závada, Otakar ; Pavlík, Jan (referee) ; Tůma, Jiří (advisor)
This bachelor thesis deals with conceptual design of high speed spindle based on cutting conditions. Research part of thesis describe each types of high speed spindle based of their drive. Next chapter are documented cutting conditions which are corresponded with experience. High speed spindle faced these act most of the time. Cutting conditions show output conditions of planetary gearbox which is described in next part of thesis. All the experience are used in conceptual design. The drawings contains of assambly drawing and drawing of selected components. The drawings are based on model made in 3D CAD system
|
|
|
Efficiency Improvement Proposal of Production of Engineering Component
Černický, Martin ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
This diploma thesis deals with machining process of shaft in the company Decoleta, a.s. to propose production efficiency improvement. The first part of the diploma thesis is focused on the description of the company's activities and analysis of the used machining technologies. The second part analyses the actual production process and proposes increase in efficiency of the component’s production. In the final part the thesis compares the current and upgraded state of machining processes and includes a technical-economical evaluation of the proposed modifications.
|
|
|
Machining processes in furniture industry
Černý, Marek ; Kalivoda, Milan (referee) ; Chladil, Josef (advisor)
This master thesis deals with machining processes in the furniture industry. Various group of materials, which are used in furniture industry are described there. Then there are described assembly and machining processes, such as manual and machine. In practical part, the production process for the selected sample product was proposed. The production was performed in a specific company, which has suitable machinery and tools. Sample product was made from double-sided laminated medium density fibreboard, which belongs to the group of wood-based materials. As a part of the debugging produciton process, the dependence tool life at cutting speed was experimentaly found. The experiment was performed on CNC milling machine with cutting speeds in the range 453 to 905 m.min-1, width draft of cutting edge 9,5 mm and feed per tooth 0,05 mm. Analog passametr Somet with an accuracy 0,001 mm was used to measure tool wear. The measured data were recorded and evaluated in program Excel. The resulting dependency tool life at cutting speed can be used in other machining operations. After performing the experiment, each parts of the product were produced and mountig was performed. The conclusion of the thesis contains an evaluation of the proposed production process.
|
|
|
Optimization of the production process of a precision machined part
Kolomý, Štěpán ; Sedlák, Josef (referee) ; Píška, Miroslav (advisor)
This master‘s thesis deals with optimization of cutting conditions when machining of precise parts in mass production. In experimental part of this thesis is a comparison of the roughing tool with indexable cutting inserts with the new implemented milling cutter. Tool wear of both roughing tools has been analysed. The surface roughness analysis after machining with the face milling cutter was performed. The output of this work is to obtain optimal cutting conditions to gain a minimum surface roughness.
|
|
|
Technology of a selected part of the vacuum pump
Lišková, Tereza ; Kučera, Lukáš (referee) ; Chladil, Josef (advisor)
The content of study is related to reducing the production times of milling of aluminum component of vacuum pump. The primary aim of the thesis is to experimentally verify the proposed cutting conditions when milling the rotor blades and then evaluate them according to predetermined parameters. The output is reducing machining time with respect to cost, tools and machine.
|
|
|
Design of spindlespeeder
Závada, Otakar ; Pavlík, Jan (referee) ; Tůma, Jiří (advisor)
This bachelor thesis deals with conceptual design of high speed spindle based on cutting conditions. Research part of thesis describe each types of high speed spindle based of their drive. Next chapter are documented cutting conditions which are corresponded with experience. High speed spindle faced these act most of the time. Cutting conditions show output conditions of planetary gearbox which is described in next part of thesis. All the experience are used in conceptual design. The drawings contains of assambly drawing and drawing of selected components. The drawings are based on model made in 3D CAD system
|
|
|
Machining of hard-to-machine materials by turning
Švorc, Josef ; Fiala, Zdeněk (referee) ; Píška, Miroslav (advisor)
The thesis is focused on machining of hard-to-machine materials. In the theoretical part hard-to-machine materials are divided and characterized. Furthermore, the thesis specifies hardened steels and their heat treatment, machinability and mechanism of wear and chip formation. There are tool materials and their classes suitable for machining hardened steels. The practical part deals with the influence of the cutting conditions on the roughness of the machined surface when turning hardened steel.
|
|
|
Production technology of a lifting equipment for tractor cooler
Raiskup, Martin ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
The thesis focuses on production technology of the lifting equipment for a tractor cooler. This device is used in order to ease the installation of a cooler during the manufacturing of a tractor. In the first chapter, various types of the lifting equipment are described. In the following chapters manufacturing methods, machines and tools for the production of the specific component are described. Furthermore, materials and manufacturing processes for the complementation of the specific component are proposed. In the conclusion, the methods for the manufacturing are suggested, the timescale is calculated and the technical-economical evaluation is performed.
|
guest ::
