|
|
Wear of hard coatings
Černý, Libor ; Křupka, Ivan (referee) ; Omasta, Milan (advisor)
This bachelor's thesis was made as a description of the main technological methods, which are used in order to manufacture hard coatings. Applications of hard coatings are realized to improve tribological properties of components in various industries. The aim is to minimize the amount of wear and friction losses. Thesis also discusses methods of measuring the hard coatings wear. These methods are important to determine the properties of coating layers and their subsequent use. A lot of testing methods offer sufficient possibilities to test various mechanisms of wear in variety of laboratory conditions. Additionally in the end of the thesis there is an experimental wear measurement of specimen on tribometer using the "Pin on disc" method. Both size and type of the wear are evaluated by profilometer.
|
|
|
Analysis of the coated carbide cutting inserts
Zdráhala, Radim ; Kolář, Ladislav (referee) ; Fiala, Zdeněk (advisor)
Bachelor thesis is focused on the analysis of the cutting and specific cutting forces during face milling of coated and uncoated exchangeable cutting inserts (VBD). The theoretical part deals with the characteristic of the milling process, coating of cemented carbides and last but not least deals with methods for measuring cutting forces. The experiment is described in the experimental part that also includes evaluation of load forces coated and uncoated exchangeable cutting inserts during changes in cutting conditions. Finally is performed the comparison of values coated and uncoated VBD for flank wears and load cells.
|
|
| |
|
|
Turning technology solution parts "flange" with coated cutting tools
Maršálek, Radek ; Dvořák, Jaromír (referee) ; Kalivoda, Milan (advisor)
This work deals with the use of coated tools in the production of component "flange" on the CNC lathe. The first section describes the process of the coating of tools and an overview of coating tools for machining from well-known manufacturers around the world. Further, it provides the assessment of technology for manufacture the components, the design of semiproduct, the solution of the technological process with the incorporation of the CNC lathe, the assembly of work instructions with calculation of machinery times, and the processing of the NC program and its subsequent verification by simulation of manufacturing process and technical-economic evaluation of the proposed solution.
|
|
|
Thermal spray coatings of bioceramics
Kašpárková, Kristýna ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
Bachelor´s thesis is focused on thermal spraying bioceramics. Bioceramic is designed to replace damaged parts of the human body. Practical use is mainly in orthopedics, jaw and facial surgery. This category of materials includes hydroxyapatite, which is characterized by biocompatibility and the ability to form a strong bond between the bone and the implant. The experimental part of the thesis was spraying 40 - pieces of dental implants for the company LASAK s.r.o. Plasma spraying technology was used to apply the hydroxyapatite coating. The required coating thickness was 60 m. The implant was sprayed and cleaned before spraying. Spraying was carried out in the laboratory of plasma coatings dental and skeletal implants ÚST FSI VUT Brno. A dimensional control was performed after plasma spraying.
|
|
|
Properties of reinforcing glass-fiber geogrids
Veselý, Petr ; Šperka, Pavel (referee) ; Dašek, Ondřej (advisor)
A proper road infrastructure is an essential part of today’s economy. Usage of roadways should be safe and its flow should be easy going. Primary net of roadways is already in place and attention shifts to its maintenance. Because of constantly increasing loads of heavy traffic, roadways are degrading at a faster pace, while there are still smaller time windows and less avialable resources for their reconstruction. That is why there has been rising demand for pavements that last longer and are able to carry higher weights. With respect to the rural roads it becomes obvious because of low amount of resources for their maintenance, that it is necessary to find an effective way to enhance pavements. From the foregoing it can be safe to say, that there is a clear need for reliable, durable and cost-effective technology of maintenance, such as the use of grids in asphalt pavements. This thesis deals with properties of geogrids made of glass fiber after its compaction as well as its effects on reduction or elimination of spreading of cracks in pavements.
|
|
|
Evaluation of the use of cold kinetic deposition technology on materials used in electrical engineering
Šteiniger, Jakub ; Zimáková, Jana (referee) ; Binar, Tomáš (advisor)
The master´s thesis deals with a process called cold kinetic deposition technology. Using this technology, a copper layer was formed on a sample with an aluminium base by high-pressure cold spraying at a pressure of 25 bar. In the experimental part, the influence of corrosion degradation in the salt chamber was assessed at the time cycles of 100 h, 200 h and 300h, where changes in internal and surface resistances before and after corrosion were measured. Subsequently, the analysis of corrosion products was performed, where the extent of corrosion attack was determined using an electron microscope. These methods led to a final evaluation of the boundary limits of the applied coating layer by cold kinetic deposition, after the effect of corrosion. Finally, a theoretical application of this technology was suggested. It was discovered that the sample placed and left in the corrosion chamber for the longest time was the most affected by corrosion. Finally, a theoretical application of cold kinetic deposition was proposed.
|
|
|
Cutting tool preparation before coating
Musil, Michal ; Novák, Zdeněk (referee) ; Humár, Anton (advisor)
This bachelor thesis summarizes importance and advantages of surface preparation before coating process. Next part of this work analyzes an influ-ence of surface preparation before coating process on tool geometry, tool life and cutting performance. Experimental part brings a comparison between mi-cro-finishing by mix of SiC particles and walnut shells and ion cleaning tech-nology that by the help of Ti or Ar ionts. The 6 mm twist drill made from high speed steel has been chosen as the sample for experimental works. There are describe the advantages of preparation of tool cutting edges before coating, especially the micro-finishing and ion cleaning, and their positive effects on geometry and performance of tool at the end of the work.
|
|
|
Modern manufacturing trends in chip machining - turning, milling and driling
Moravčik, Jaroslav ; Trčka, Tomáš (referee) ; Polzer, Aleš (advisor)
Chip machining has strong historical foundation. First innovations in machining were created long ago and next Innovations appeared sporadically. The Industrial revolution and then the second half of 20th Century meant start of self–driven, programmable machines used in machining. This led interest of engineers to machining process itself. The aim of this Diploma thesis is to characterize most interesting modern trends from last few years and unite them in electronical database which will be included in this thesis. Main attention is aimed for innovations in chip machining in general and also in specific branches – turning, milling and drilling. Thesis also includes discussion about economical aspect of application of modern trends in chip machining.
|
|
|
On the increase of cutting performance of thread cutting taps with coatings
Světlíková, Jitka ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This bachelor thesis deals with the process of cutting, the wear of cutting tools and the fact, that coating makes tools more durable and increases cutting power. The goal of the experimental part is to determine, compare and evaluate cutting features in the process of thread cutting with taps of different coatings. For the experiment invariable cutting conditions were chosen, the only variable is the type of used coating. The result of the experiment is the measurement of cutting torque dependent on time and the grade of the wear of cutting tools.
|
guest ::
