|
|
Bridge over a local road and a brook
Tichavská, Andrea ; Čihák, Petr (referee) ; Nečas, Radim (advisor)
The purpose of the master thesis is the design of the concrete highway bridge by European standards. The highway is situated on two independent prestressed load-bearing structures with cross-section area of constant dimensions over its length. The bridge deck is built on a falsework considering its proportions and obstacles under the bridge. The thesis contains the design and the assessment of the load-bearing structure in longitudinal and transverse direction including the calculation of cross beams and an anchorage zone.
|
|
| |
|
|
Cable-supported pedestrian bridge
Hlava, Martin ; Juchelková,, Pavlína (referee) ; Nečas, Radim (advisor)
The purpose of the master’s thesis is about a concept of a pedestrian bridge´s bearing construction for pedestrian endorsed wires above a highway R35. The work includes a statical construction calculation of the suspended foot bridge of six spans, which has been chosen from three options. The chosen option is built of a monolithic, pre-stressed concrete board supported by suspenders, which is made by segmental elements above the fast highway. Calculation of a longitudinal direction has been made in an ANSYS application. Assembling status and cross direction of the construction has been modelled at SCIA Engineer. The construction´s recognition has been made manually expect of several towers cross-section, where the judgement has been made at IDEA StatiCa.
|
|
|
Bridge across the motorway
Jetmar, Ondřej ; Jurík, Michal (referee) ; Stráský, Jiří (advisor)
The thesis deals with the design of a bridge structures panning the highway. While designing the structure, it was vital to consider and implement the needs for both the aesthetic and economical desires and requirements. Of the two design solutions in the thesis, the one of the three-spaninteg rated spandrel beam is chosen. The main goal is a thorough design of the a forementioned load bearing structure.
|
|
|
Design of prestressed bridge structure
Otáhal, Ondřej ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
Diploma thesis deals with design of a road bridge over Husí potok in Hladké Životice. The supporting structure of the bridge is designed in three variants, one of which is selected variant post-tensioned slabs. To address the internal forces is used computing software Scia Engineer. In the structural analysis of the bridge structure is assessed at the ultimate limit state and serviceability by European standards – Eurocodes. For chosen variant is prepared drawing documentation and visualization.
|
|
|
Flyover bridge across the II/434 road
Russnák, Adam ; Neudert, Zdeněk (referee) ; Panáček, Josef (advisor)
Subject of this master thesis is a flyover bridge over the road II/434 and flood-land. As a load-bearing construction is designed two-beam structure. Traffic loads on this structure are considered according to standard ČSN EN 1991-2. The structure design is based on resultant stressing according to standard ČSN EN 1992-2.
|
|
|
Bridge on a ramp
Otevřel, Rostislav ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
Thesis describes the design and assessment of a plan view of a curved road bridge, which is a part of an elevated crossing transferring directional divided communication and tram line of public transport in Brno. There are four variants of cross sections designed, from which is selected bicameral cross section with arched angled bottom plate, which should be aesthetically pleasant to impress in an urban environment. Static calculation is processed and design is assessed by current European standards. Then clear and detailed drawings, the process of construction and visualization of the bridge are processed.
|
|
|
Design of floating concrete structure
Páleník, Branislav ; Kolenčík, Pavel (referee) ; Zich, Miloš (advisor)
The project aimed to familiarize yourself with the issue of floating structures, according to the procurement documents and knowledge acquired during studie, a study of existing floating structures. Review was conducted design adapted from documents. More space was devoted bottom structure in the assessment. Other structures designed only provisionally.
|
|
|
Static analysis of residential building
Hanzlík, Petr ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The discussion of the master’s thesis is static analysis of residental building. The thesis details the original solution from assesment and a new design variant solution. The work is focused on static solution of monolithic concrete plate with ribs and is devoted to limit states assessment of the plate with ribs. The thesis includes a time analysis structure and prestressed ribs in the new variant.
|
|
|
The prefabricated factory building with office block
Krejčová, Jana ; Bažant, Zdeněk (referee) ; Čírtek, Ladislav (advisor)
Master´s thesis describes the design and assessment of selected elements concrete factory building with office block, elaboration of shape and reinforcemenet drawings of selected structural prefabricated elements. The work also includes technical report and details of connection elements. Calculation was performed also using a computer program SCIA Engineer and Excel.
|
guest ::
