National Repository of Grey Literature 51 records found  beginprevious40 - 49next  jump to record: Search took 0.00 seconds. 
Cyber-environment for systems of ICS/SCADA type
Váňa, Martin ; Blažek, Petr (referee) ; Fujdiak, Radek (advisor)
The thesis explores the problematics of cyber environment for the ICS/SCADA systems. First, shorter section is mainly focused on general introduction into the ICS/SCADA systems and their inner workings. Communication model of a general SCADA system and its foundational elements are explained. It is mainly theoretical passage and it serves as an introduction. It is necessary for understanding the second part which is mainly practical. The appropriate system is chosen as a first thing in the practical part of the thesis for the implementation of the whole project. There are defined criteria on which the system itself is implemented. Following that the system itself is implemented under a framework called openMUC and it is tested with help of the simulators according to the objective of the thesis.
Identification of Device Availability in Technological Networks
Vodehnal, Stanislav ; Mlýnek, Petr (referee) ; Škorpil, Vladislav (advisor)
This diploma thesis deals with the monitoring of network elements of technological networks and distribution systems. There are described reasons why and what kind of values we want to monitor. Three monitoring systems are then selected, described their properties and functions. Based on their merits, one system for deploying the test environment is selected. The practical part is the configuration of the selected system and its subsequent deployment to the network.
Description and testing of communication protocols IEC 60870-5-103 and 60870-5-104
Pekárek, Dominik ; Mičulka,, Petr (referee) ; Sumec, Stanislav (advisor)
This thesis is focused on testing of communication protocols IEC 60870-5-103 and IEC 60870-5-104. Theoretical part of the thesis describes basic principles, services and possibilities of both communication protocols. Practical part of the thesis deals with configuration of the IEC 60870-5-103 communication standard of protective terminal REF630. PCVDEW6 tool was used to test this communication protocol. Next part of the thesis is focused on convertion of the communication standard IEC 61850 to IEC 61870-5-104 using control system COM600. The testing of both communication protocols was carried out in the laboratory of the protection relays on the testing panels at ABB Brno.
Transfer the IEC 61850 standard for communication protocol ModBus
Šikula, Jiří ; ABB, Oleksiy Melnyk, (referee) ; Polsterová, Helena (advisor)
This work describes the modbus communication protocol used in earlier and recent medium voltage switchgears. It also describes the IEC61850, a communication standard for most of the switchgear manufacturers as ABB, Siemens and others. It further describes the station automation gateway COM600, which is capable of conversion between many communication protocols. And finaly in this work you can find the concept of a device which is capable of conversion from IEC61850 to Modbus.
Design of protection terminal communication structure and extending peripherals in the control system
Havelka, Tomáš ; Mičulka,, Petr (referee) ; Háze, Jiří (advisor)
This work deals with the control system COM600 from ABB company, general description of control system COM600 and basic tools in this control system. The main function this work is desing own communication structures and configured control system COM600, as Gateway to convert standard IEC 61850 to IEC 104 with protection terminal REF 615 and his expansion peripherals of RIO600.
Medium voltage substation automation using control system COM600 and standard IEC61850
Havelka, Tomáš ; Štaffa, Jan (referee) ; Háze, Jiří (advisor)
This work deals with problematic of standard IEC61850, mainly with chapter IEC 61850-9-2 LE which is commonly known as Process bus communication. There are described advanced tools of the control system COM600 with detail description of their configuration in this work. It also deals with configuration of IEC 61850-9-2 LE with Relion family protection relays and its implementation to the control system COM600. The main aim of this work is focused on configuration of IEC 61850-9-2 standard with protection relays, configuration and detail description of COM600 advanced tools, description of Logic processor, further custom design and appliaction configuration global reset of Logic procesor in control system COM600.
Application of Sensors and Digitalization Based on IEC 61850 in Medium Voltage Networks and Switchgears
Štefanka, Martin ; Braciník, Peter (referee) ; Müller,, Zdeněk (referee) ; Toman, Petr (advisor)
Vzduchem izolované vysokonapěťové rozváděče jsou nedílnou součástí energetického distribučního řetězce a to jak v průmyslovém, tak ve veřejném sektoru. Hlavní funkcí rozváděče je ochrana pracovního personálu, rozpojování/odpojování a spínání, izolování, měření proudů a napětí, chránění a ovládání zatížení a komunikace dat do řídících systémů. V každé z výše zmíněných funkcí probíhal technologický vývoj v průběhu posledních 40 let. Dnešní rozváděče jsou spolehlivé a elektrickému oblouku odolné zařízení, zoptimalizované téměř k fyzikálním limitům dielektrických, elektromagnetických a termodynamických polí. Vakuové vypínače zajišťují stálou a spolehlivou vypínací funkci. Taktéž v oblasti chránění, řízení a komunikace došlo k mnoha technologickým proměnám. Od elektromechanických relé přes zařízení založená na tranzistorech, později na jednoúčelových mikroprocesorech, až po dnešní multifunkční vysoce výkonná mikroprocesorová inteligentní elektronická zařízení. Pouze oblast měření proudů a napětí setrvala z technologického hlediska posledních 40 let beze změny. K dominujícím měřícím technologiím dneška stále ještě patří indukčně založené transformátory proudu a napětí. Byly sice provedeny některé pokusy k obměně technologie měření jako takové, nicméně bez dosažení úspěchu. Tato dizertační práce je zaměřena na poskytnutí nového náhledu na alternativní technologii měření v elektrických sítích a ve vzduchem izolovaných vysokonapěťových rozváděčích, kterou lze využít jak pro měření proudu, tak i napětí. Tato práce vysvětluje, proč Rogowského cívky, odporové a kapacitní děliče jsou tou správnou volbou a měly by být použity ve vysokonapěťových rozváděčích a podrobně analyzuje přesnost měření a jejich příslušné meze. Dále tato práce popisuje, že pro nasazování nových měřících technologií musí být postupováno systematicky. Senzory připojené k inteligentním elektronickým přístrojům a schopností komunikace založené na IEC 61850 spolu s vysokorychlostní komunikační sběrnicí Ethernetu vytvoří systém, který zjednoduší a sjednotí konstrukci rozváděčů a umožní oddělit aspekty projektování měření od studie zkratových selektivit. V práci je také uveden příklad, jak tento nový systém může přinést změny a zjednodušení do oblastí projektování a řízení. V této práci jsou popsány výsledky několikaletého úsilí při stanovení nových měřících a digitalizovaných přístupů ve vysokonapěťových rozváděčích pod autorovým vedením. Toto úsilí také vedlo k uvedení nového produktu – UniGear Digital - konceptu od ABB. Závěrečná část práce demonstruje praktické nasazení všech výsledků v této práci při skutečných aplikacích.
Testing of the IEC 61850 relay communication
Bolgár, Robert ; Topolánek, David (referee) ; Toman, Petr (advisor)
Goal of this thesis is practical use of standard IEC 61850, which deals with communication between devices in substation. The main idea is create a model for testing communication between relays with testing device CMC 256+ from OMICRON company and his software equipment „IEDScout“, „GOOSE Configuration“ and „QuickCMC“.
Model of Electrical Station with IEC 61850 Communication Protocol
Stodůlka, Ivo ; Majer, Karol (referee) ; Orságová, Jaroslava (advisor)
The amount of information transmitted in automation systems has grown exponentially, since the modern digital protection and control devices had been introduced. These systems with different features, limited data flow and the mutual incompatibility were mostly based on the principles defined by vendors themselves. The international communication standard IEC 61850 was created with the aim of introducing definite rules and the structure into the communication part of the electrical substations with the application of the latest technologies. This standard also emphasises the mutual interoperability of the different vendors´ devices. This thesis is focused on the comprehension of basic principles, the practical application and the testing of digital protections with IEC 61850 communication standard implemented. The first part of my thesis is a theoretical one and describes basic principles, services and possibilities of the abstract communication model defined by IEC 61850 standard. The second part of my thesis describes the configuration of IEC 61850 communication standard of the protective terminal REF 542plus with the partial support of this standard including only the vertical communication and the subsequent testing using the OMICRON's testing tool IED Scout. The third part of my thesis is focused on the configuration of the feeder protection REF615 which has fully implemented IEC 61850 standard covering both vertical and horizontal communication by means of the GOOSE messages and the subsequent testing using the ABB's testing tool ITT600 SA Explorer. The testing of both protective devices was carried out in the laboratory of the protection relays on the testing panels at ABB PPMV Brno. The conclusion summarizes the contributions of IEC 61850 communication standard and there are also compared the engineering procedures of the protective terminal REF 542plus and the feeder protection REF615.
Testing Communication via IEC 61850 and GOOSE between ABB and Siemens Protections
Vavreczky, Gábor ; Palát, Jan (referee) ; Orságová, Jaroslava (advisor)
The main objective of this thesis is to examine the possibility of cooperation of IEDs from ABB and Siemens in accordance with IEC61850. The aim is to create and test a workflow, after which protection relays from ABB and Siemens will communicate with each other via GOOSE messages. This paper provides a description of the international standard IEC61850, as a theoretical basis. Describes in detail the configuration of protection relays SIPROTEC 7SA610 according to IEC61850. Work provides a description of the configuration tools PCM600 and IET600 which are used for configuration of protection relays RELION® REF615 by ABB. In the final part of the work experiences that are written in collaboration used protection.

National Repository of Grey Literature : 51 records found   beginprevious40 - 49next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.