National Repository of Grey Literature 33 records found  previous4 - 13nextend  jump to record: Search took 0.00 seconds. 
Extension of School
Jirčík, Jakub ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The content of the thesis is a static design of the supporting parts of the extension of the textbook pavilion of the elementary school in Mirošov. The proposed building is a four-storey reinforced concrete monolithic column construction. The ceilings above the first three floors are designed as cross-reinforced slabs with internal girders. The roof slab consists of a monolithic slab with additionally prestressed beams. The internal forces were calculated using SCIA Engeneer 19.0 and these values were subsequently verified by manual calculation. The design followed the applicable European standards. The result of the work is a static assessment of the object and corresponding drawing documentation.
Commercial building in Brno - the construction technological planning
Sedláček, Stanislav ; Štěpán, Richard (referee) ; Motyčka, Vít (advisor)
The aim of my thesis was to perform construction and technological preparation of the construction of commercial house in Brno in the street Křídlovická. The introduction contains the expected design and construction process of the proposed building as a whole. It is also prepared a preliminary draft of the financial cost of the entire project designed according THU and object schedule. Furthermore, the implementation of the project construction site for a major part of the commercial house. Gradually work focuses mainly on the implementation of the technological stage of construction site with detailed processing procedure for the implementation of monolithic concrete structures of the building.
Reinforced concrete structure of a multifunction building
Kozumplík, Lukáš ; Šimůnek, Petr (referee) ; Šulák, Pavel (advisor)
The bachelor project is focused on the design of monolithic reinforced concrete ceiling slab of typical floor of a multifunctional building. Calculation of internal forces is carried out in computer software SCIA Engineer. Verification of calculation of internal forces is via simplified manual method. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1)
Reinforced concrete structure
Zatloukal, Bohuslav ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
This bachelor project is focused on the design of monolithic reinforced concrete ceiling structure of the first floor of a hotel and creation design documents of the load-bearing elements. The load-bearig elements (ceiling slab, outer rib, column and core wall) are appraised according to ultimate limit state. For calculation of internal forces was used a software named RFEM and the internal forces were verified by simplified manual method. Assessment is done according to ČSN EN 1992-1-1.
Arch bridge across the expressway
Vaněk, Štěpán ; Štefan, Petr (referee) ; Nečas, Radim (advisor)
The objective of this theses is arch bridge design over the expressway. Bridge is consist of bridge deck, which has three pillars and composite arc. The Bridge deck is on the edges fixed into the foundations and in the middle adherent on overhead cables. The bridge is carried by combination of strands and aerial cables mounted on reinforced concrete arch. Overhead cables are slant due to the transverse direction of the bridge in the longitudinal direction is in the direction of the arc. Model of the construction was made in a calculated program SCIA ENGINEER 2011. The designe is in accordance with applicable standards.
Survey and Diagnostics of Reinforced Concrete Structure
Richterová, Dominika ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The main theme of this diploma thesis is a building survey and diagnostics of a reinforced concrete construction. In the first, theoretical part the focus lies on a description of each method for testing constructions and their evaluation. The second, practical part focuses mainly on finding of material characteristics and reinforcement of particular parts of the construction. On basis of obtained information, the final part of this paper focuses on static assessment of chosen parts of the construction.
Variant solution of concrete flat slab supported by columns
Fárková, Karolína ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The thesis focuses on the design and assessment of a locally supported ceiling slab. The slab was designed in two variants: a reinforced concrete slab and a prestressed slab, both of which were subsequently approximately economically evaluated. To calculate internal forces, a 3D model was created using the FREM 5 program. The structural analysis was conducted using the finite element method and the method of equivalent frames. Both slabs were assessed for ultimate limit state and serviceability limit state.
Monolithic multi-storey frame building
Přikryl, Martin ; Šulák, Pavel (referee) ; Bažant, Zdeněk (advisor)
The final thesis is focused on the design of monolithic reinforced concrete ceiling slab and supporting vertical structures of typical floor of an administrative building. Calculation of internal forces is carried out in a computer software SCIA Engineer. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1).
Experimental tests of reinforced concrete members loaded by shear effects
Macek, Marek ; Láník, Jaromír (referee) ; Žítt, Petr (advisor)
Theoretical design and manufacture of the specimen. Load test 4-point bending shear effects. Tests on mechanical properties of the material. Numerical analysis of the test element software ATENA 2D. Static calculation according to standardized characteristics values and fair values of the test results. Evaluation and comparison of results.
Survey and Diagnostics of Reinforced Concrete Structure
Bernard, Lukáš ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
This diploma thesis deals with construction and technological survey of the reinforced concrete structure. The first part of the diploma thesis deals with the properties of the reinforced concrete and with the building survey methods applied in the second part of the thesis. The second part of the diploma thesis focuses on diagnostics of existing structure. More specifically, the hardness of the concrete is tested using a Schmidt hammer and then it is further specified by testing the cores. The reinforcement in the reinforced concrete is also tested using electromagnetic indicator, ground-penetrating radar, and chopped probes. Lastly, a static assessment of the selected girder and column is conducted.

National Repository of Grey Literature : 33 records found   previous4 - 13nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.