|
|
Measurement of the fiber optical transport links
Ambrož, Jan ; Škorpil, Vladislav (referee) ; Reichert, Pavel (advisor)
This thesis deals with the measurement of optical transport links. In particular, the measurement of attenuation, chromatic and polarization mode dispersion. Specic me- asurement systems using a WDM and passive optical networks. Within each chapter are listed the causes and eects restrictive factors and methods of measurement. In chapter Attenuation measurements are described radiation and material loss as the main causes of depression. Methods whitch are described two lengths, insert loss and reectometri. Chromatic dispersion at dierent speeds of various wavelengths limits systems with high transfer rate. Methods of measuring the phase shift, dierential phase shift, pulse time delay and interference. Polarization mode dispersion is a random phenomenon caused double refraction, must be measured after completion of the route. Scanning wavelen- gth, traditional and general interference, reectometri and the polarimetric are methods of measurement. It described the measurement of WDM systems in three stages of its build. In brief PON networks are presented, with the specicities of the measurement over splitter. Most chapters are supplemented by the results and conclusions of practical measurements. At the end of the work are given by the two standards deal with the measurement of optical transport links.
|
|
|
Design of FTTH network
Šifta, Radim ; Reichert, Pavel (referee) ; Filka, Miloslav (advisor)
The aim of this thesis is to bring reader the issue of FTTH optical access network design. The thesis is divided into several basic parts. At the beginning of the thesis is outlined comparison with other optical access networks. In the next chapter are discussed the basic solutions, used architectures, topologies, and their comparison. The following chapter deals with the passive elements of the distribution network, their division and using. Next chapter is focused on installation technologies of distribution infrastructure, especially on microducting technology. Penultimate chapter is focused on the video services distributioning. The final part of the thesis consists of three designed models of the different architecture for the fictional village of "Světlokosy". There is an analysis of the individual variations in technological and economic terms. Simultaneously, investment costs of the proposed models are compared and their overall comparison and evaluation.
|
|
|
Trends in Access Networks
Štěpán, Petr ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
This work deals with the modern trends in FTTX, but mainly focuses on FTTH, who represents the connecting of fiber to the homes of the participants. Sum up the basic problems of communication on the optical fibre, followed by comparison with other types of access networks. Another part is the analysis of the problems of construction and a description of the optical network topologies and technologies used in FTTH. In following chapter are characterized active and passive elements forming AON and PON networks. Next part deals with the study of the most common services that can be on the optical access network to operate. They are mainly associated with the TriplePlay services. An integral part of the project is the study of management and supervision optical networks. In the main part is created real model situation where is the requirement for the creation of optical access networks with broadband of TriplePlay, followed by selection of appropriate options and detailed project with a selection of active and passive elements with economic balance.
|
|
|
Influence of the frame size on splitting ratio in the passive optical networks XG-PON
Kočí, Lukáš ; Horváth, Tomáš (referee) ; Münster, Petr (advisor)
The diploma thesis deals with the theoretical definition of passive optical networks, furthermore the description of methods of channel bundling in passive optical networks and the coexistence and migration between standards. The main essence of this work is the XG-PON (10-Gigabit-capable Passive Optical Network) standard. This standard is generally defined along with a description of the physical layer. The transport layer is detailed analysis. There is a description of conditions, under which the Optical Network Unit pass through, when is activated. Additionally, this diploma thesis focuses on the processes of connecting Optical Network Units to the Passive Optical Networks and the timing relationships between Optical Network Units and Optical Line Terminal. The simulations demonstrate that as the number of simultaneous connections to Optical Network Unit increase, longer wait time for each additional connection becomes. This also solves the collision conditions, that might arise in communication and the equalization delay. Finally, the diploma thesis deals with the influence of a refractive index on timing relationships.
|
|
|
Design and simulation of passive optical network PON
Mikauš, Jiří ; Krajsa, Ondřej (referee) ; Reichert, Pavel (advisor)
The aim of master's thesis was to demonstrate chosen PON network in simulation software OPNET Modeler. The work deals with passive optical networks. In particular, solutions that are based on the transmission of Ethernet frames. EPON and 10GEPON standards are described in theoretical section. EPON Standard was introduced already in 2004. Newer 10GEOPN is back compatible, which is ideal as a suitable solution for modern network with a high data rates demands. The practical part describes process of developing network nodes for passive optical network. EPON model was developed in simulation tool, that demonstrates basic features of the standard IEEE 802.3ah. The simulation results are demonstrated in last section.
|
|
|
Design, development and measurement of optical access networks
Ambrož, Jan ; Šporik, Jan (referee) ; Tejkal, Vladimír (advisor)
The work deals with the possibilities of realization of optical access networks. They are introduced to FTTx optical access, including their specifications and differences. The document was largely devoted to passive and active optical networks. These two different technological approaches are explained and compared. Are presented technical solutions of routes - traditional options for laying underground or into the air, but also as an alternative microtubing. Mentioned are also the active network technology. The work also included the issue of measurement of optical access networks. They are illuminated important transmission parameters and methods for their measurement. The whole work is directed to the full FTTH network design according to the standard GEPON. In designing the use of theoretical information contained in each chapter. It does the form of technical documentation in accordance with the procedures used in practice, contains drawings, specific technical solutions and a detailed budget price. The design was verified by attenuation of balance. Finally there are the results of simulations of the proposed network in OptiSystem7.
|
|
|
Optimization and parameter measurement of PON network FTTX
Černý, Michal ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
Práce rozebírá současný vývoj na poli pasivních optických sítí a jednotlivé generace přenosových standardů. Podrobněji se zabývá parametry ODN, metodami jejich měření a volbou potřebných měření v praxi. Hlavní část práce je zaměřena na měření pasivního WDM prvku, kde je provedena analýza vstupů a výstupů, měření vložného útlumu a přelechů podle ORL na provozních vlnových délkách.
|
|
|
Methodology for designing PON networks
Dallal, Anas Omar ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
Cílem této práce je analyzovat současný stav přístupových optických sítí,a hlouběji prozkoumat PON metodiku a návrh sítě. Navrhnul jsem síť založenou na konceptu FTTH pro 90 rodinných domů ovládané z centrální stanice vzdálené 20 km. Zabýval jsem se problémy při návrhu FTTH, konkrétně pasivní optickou sítí. Dále jsem se zabýval ATM-PON a Ethernet PON (EPON), které jsou založeny na společné síťové architektuře, PON, ale používají jiné přenosové technologie na podporu integrovaných služeb a jiné protokoly. Po zadání (optimálního) síťového řešení, které se hodí pro nabídku Triple-Play služeb. Dále budu popisovat, jak fungují síťová propojení a také budou popsány metody měření a testování navržené sítě "po aktivaci a nastavení sítě" a "před aktivací síťových služeb ". Při měření jsem také používal OTDR a prakticky ověřil charakteristiku linky. V práci je také naznačeno monitorování optické sítě.
|
|
|
FTTx network design
Tejkal, Vladimír ; Němec, Karel (referee) ; Reichert, Pavel (advisor)
The main goal of this diploma thesis was to implement the proposal of optical access networks in the selected location. Introduce is focused on the physical layer of network. This includes optical fibers, optical cables, connectors, optical splitters, and more. According to the place of termination of optical fiber will be studied best FTTx connections. According to network topology distinguished point to point and point to multipoint network. Networks points to point are also known as an active optical network and for each user are restricted to a separate fiber. Point to multipoint networks known as passive optical network. In terms of the PON is defined by many standards. For a selected location will be choice the most appropriate solution. Finally, the measurement will be made and will be considered for monitoring the route. Before the design of optical access networks, I made an illustrative simulation in program OptSim. Performed simulations helps to study the transmission characters of optical networks, depending on the physical architecture. In general, for the design of high-capabilities networks for large companies will be more appropriate active topology that provides due wavelength multiplexes high transmission capacity. To join in the urban areas with a large number of separate houses, it is more appropriate use of passive topology. For the design of optical networks has been selected location with multiple housing buildings. The end customer is not given the requirement for high data transfer rates as large companies. For the proposal was selected FTTB networks which is suitable because of lower costs. The second variant of the proposal was a passive optical network according to standard GPON. This standard was chosen because of the high splitting ratio. For both solutions was developed the entire proposal by ITU-T with a detailed drawing documentation. In the selected area was conducted measuring the optical networks in order to verify the possibility of extension actual solutions. For a sample issue of measurements, I made several measurements using optical reflectometer over an optical splitter in order to prove the need for measurements during construction. FTTH networks gaining in popularity more and more, but price is the limiting factor.
|
|
|
Methodology for FTTH optical network measurement
Gajdoš, Jaroslav ; Reichert, Pavel (referee) ; Filka, Miloslav (advisor)
The main topic of this master thesis is a FTTH measurement methodology of optical networks and its specific features 9 compared with other measurement methodologies. Also, the use of the FTTH measurement methodology: an example of measurements of a passive network with splitter 1:8 and analysis of the results of these experimental measurements. The first part of the thesis concerns itself with the description of optical networks and characteristics and features of the FTTH networks. A detailed description of the passive optical networks is provided: e.g. the optical network unit ONU, the optical line termination OLT, and, most importantly, the passive optical splitter. The wavelength division multiplex 9 WDM 9 which is used in passive optical networks is also described in detail. The chapter on measurement methodologies focuses in detail and provides many examples of currently used measurement methodologies of these networks. The best results are currently achieved with the OTDR methodology. The second part of the thesis concentrates on the description of the measurement of a passive optical network with splitter 1:8 using the methods described in previous chapters. As conclusion, a detailed analysis, assessment of the results and their usefulness when put into practice is provided.
|
guest ::
