|
|
Prestressed bridge in Velké Pavlovice
Stloukal, Radim ; Růžička, Stanislav (referee) ; Koláček, Jan (advisor)
The subject of this thesis is to design a bridge construction over the river Trkmanka in the municipality Velké Pavlovice. The superstructure is designed as a prestressed one field slab bridge with the length of 16,85m. As a part of this thesis there is enclosed structural analysis calculated accordingly to ČSN EN 1992-1-1. The load effects were calculated by Scia Engineer and compared with manual calculation. The rest of the calculations are done manually and ocassionally compared to engineering software. The construction has been analysed for the ultimate limit state, serviceability limit state and the stress anchors have been designed.
|
|
|
Static analysis of reinforced concrete floor structure of historical building
Nani, Pavel ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
The chief objective of my bachelor’s thesis is a design of the reinforced concrete floor structure of a historical building over 1st floor. The historical building was built in 1874. There are three floors in this building and there isn’t any underground floor. The reinforced concrete floor structure consists of the following forms of structure – a ribbed ceiling, a floor slab, a beam, a shell of vault and a staircase. The ribbed ceiling is made from a lost formwork of the VELOX firm. The set reinforced concrete floor structures are according to ČSN EN 1992-1-1.
|
|
|
Railway bridge over a local brook
Libiger, Martin ; Trenz, Jan (referee) ; Nečas, Radim (advisor)
The purpose of this work was to design a bridge local stream to convert single-track railway line. The possible variation deals with the construction of prestressed girder bridge on one field with the lower deck. The aim of this work was to design and evaluate the structure on the basis of ultimate limit states and serviceability limit states according to applicable EN standards.
|
|
|
Design of a one-span beam bridge
Fojtů, Jan ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The aim of the thesis is a safe and economical design of a bridge over a watercourse according to all valid regulations and standards. There were designed three possible options in accordance with the recommended dimensions. The variation with the cross-section that consists of two beams and effective width of flanges is preferred. The thesis is mainly focused on the design of bearing concrete structure.
|
|
|
Pedestrian bridge across the river Svratka
Hlava, Martin ; Koláček, Jan (referee) ; Nečas, Radim (advisor)
The subject of the bachelor thesis is about a concept of pedestrian bridge across the river Svratka. The work includes a statical calculation of the pedestrian bridge construction of one ground, which has been chosen from three other options. This chosen alternative is formed by a prestressed concrete´s plank with parapet´s supports of a variable cut earned by outer switchable cables. The calculation of the stress influence has been made by Scia Engineer Software. The construction recognition has been accomplished manually. A process of construction´s works are not going to be treated in this work.
|
|
|
Design of a one-span slab bridge
Mareček, Tomáš ; Zvolánek, Lukáš (referee) ; Nečas, Radim (advisor)
This thesis deals with the design and solution of a slab bridge structure. This paper is divided into chapters in chronological order depending on the designe and solution. In first chapter are presented two options of bridge and one of them is selected to next counting. The next chapters contain describition of loading, changes in prestressing and internal forces. Final chapters are aimed to serviceability limit state and ultimate limit state.
|
|
|
The local road bridge
Janek, Tomáš ; Panáček, Josef (referee) ; Klusáček, Ladislav (advisor)
The bachelor´s thesis deal with a design and assessment a one-span girder bridge. The girder bridge is made of prestressed concrete. The aim of the bachelor´s thesis is to design and assess supporting structure to the specified load.
|
|
|
Space structure of industry building object
Pelikán, Adam ; Švaříčková,, Ivana (referee) ; Šimůnek, Petr (advisor)
The subject of this project is the structure of the storage hall which is made of reinforced concrete. It is designed as precast frame (span of 18m), founded on pocket footings. The roof deck (non-rigid) consists of ribbed slabs. The cladding is made of sandwich panels (reinforced concrete and isolation) layed on foundation beam. The design is focused on the single typical frame. Roof girder, column and pocket footing are designed. Designed life of the structure is 50 years.
|
|
|
The calculation of existing slab bridge
Luliak, Ondřej ; Nečas,, Radim (referee) ; Klusáček, Ladislav (advisor)
Bachelor´s thesis is concrended with resistance simple bearing slab bridges. The main focuse is comparison diferents in resistance calculated according to ČSN valid between 1915 and 1935 compare with calculate resistance according to ČSN EN which is valid now. Next part is concrended serviceability limit state.
|
|
|
Load bearing structure of sport building object
Klodner, David ; Šulák,, Pavel (referee) ; Šimůnek, Petr (advisor)
This thesis is focusing on the design and assessment of reinforced concrete frame of the administrative part of the sports hall. In developing the computational model, the emphasis was on the comprehensiveness and reliability of an idealized structure, providing a economical design of elements. Assessment was conducted on the ULS and SLS for selected critical cross section - double staircase, ceiling slab, ceiling beam, the inner column and footings.
|
guest ::
