|
| |
|
|
Diagnostics of medium voltage and high voltage circuit breakers
Kapalla, Alexej ; Šimek, David (referee) ; Dostál, Lukáš (advisor)
This bachelor work is focused on medium-voltage and high-voltage circuit breakers and their diagnostics. The thesis presents the history of HV circuit breakers and their main division. Subsequently, the relevant standards are listed in the work and diagnostics of the MV circuit breaker VD4 and the HV circuit breaker S1-245 from AEG is performed. In case of the VD4 circuit breaker, a new and used circuit breaker was diagnosed. The measured values are then compared and the impact of usage is shown. The work describes the measurement of main contact resistance, insulation resistance, closing and opening times and vacuum quality.
|
|
|
Short Circuit Currents in DC Systems
Kolařík, Robin ; Geschwinder, Lukáš (referee) ; Paar, Martin (advisor)
The bachelor thesis deals with the analysis of short-circuit currents in DC systems. The thesis introduces the possibility of application of low voltage DC distribution in commercial and industrial buildings. The second part is focused to high voltage direct current transmission. The practical part deals with the calculation of short-circuit currents of individual elements and subsequently with short-circuit conditions in the DC network. At the end of the work are evaluated advantages and disadvantages between AC and DC voltage and suitability of use in given areas.
|
|
| |
|
|
Operation of embedded cable lines into HV distribution grid
Černý, Tomáš ; Wasserbauer, Vojtěch (referee) ; Ptáček, Michal (advisor)
The thesis focuses on a section of cable line inserted into overhead high voltage power line. The essence is a description of the benefits, risks and impacts of the operation of such sections in terms of protection, transition processes. etc. The thesis also includes economical comparison of an acquisition and operating costs of both overhead and cable line. The topic of this thesis was given by ČEZ Distribuce a.s.
|
|
| |
|
|
Technical modification design of the electrical power systems for Modřice and its surroundings
Šerý, Petr ; Kopička, Marek (referee) ; Ptáček, Michal (advisor)
ABSTRACT This thesis is concerned with a technical modification of design of the electrical power systems for Modřice and its surroundings. The thesis describes a basic theoretical distribution of the electricity network and the distribution network itself. Following chapters are devoted to the development and construction of the HV networks and to the methods and ways of calculating the steady operation of the network. These methods are then used in the computational programs that are presented in the next chapter of this paper. The aim of the practical part of the thesis is to first determine the current state of the network in the given location. Furthermore, several modifications are proposed according to the requirements for increasing the power consumption or connecting the new supply places. The proposed modifications are further assessed for the different operating conditions. The result is a network that is functional, operational and reliable. The whole analysis is carried out in the PAS DAISY Off-line V4 Bizon computing program.
|
|
|
Voltage tests under wet condition
Vondrák, Michal ; Štěpánek, Jaroslav (referee) ; Krbal, Michal (advisor)
The main objective of presented thesis is to design a shower system in order to extend voltage tests by voltage wet testing. The introduction focuses on important aspects related to voltage wet testing. Such aspects originates mainly from Czech but also foreign standards. Following part of the thesis deals with specific wet testing design proposals, which fulfil the standards requirements. The final part of presented thesis is focused on partial experiments. Namely the analysis of rain water properties, behavior of rain drops exiting the nozzle with varying flow and nozzle angle, wet test on insulator in dry and wet conditions.
|
|
| |
|
|
Design and optimization of laboratory HV models
Kočí, Zbyněk ; Vyčítal, Václav (referee) ; Varmuža, Jan (advisor)
Bachelor's thesis is focuses on the operation of the distribution system in the Czech Republic and the use of new types of cables in the world. It describes the characteristics, division and use of overhead lines and cable lines. This work also deals the division and control DC networks, their advantages and disadvantages. In superconducting cables is engaged in their development, advantages and disadvantages. Describes their application and use in the future. It also describes the parameters affecting the properties of the ropes and the cables of the AC and DC wiring and ways to mitigate the negative effects on the ropes and on the surrounding environment. Work deals with measurement and counting of the laboratory models for their optimization. Finally, the work describes a proposal of new laboratory model for the measurement and stating components, which are needed for optimization models and the production of a new model
|
guest ::
