|
|
Multitone Modulation Implemented via Filter Bank
Krajsa, Ondřej ; Vlček, Čestmír (referee) ; Róka, Rastislav (referee) ; Šilhavý, Pavel (advisor)
The work is focused on multitone modulation implemented by filter banks, which are alternative modulations to DMT and OFDM modulations. The paper describes the two proposed modulation schemes, non-overlapped FMT and half-overlapped FMT. This modulations utilize the benefits of implementing FFT algorithm in conjunction with a bank of polyphase filters that are derived from the prototype filter. To design the prototype filter a Matlab tool is developed. For both modulations the simulation models were created for xDSL systems and for wireless transmission channel. Non-overlapped FMT modulation proved to be a suitable modulation scheme for channels with narrowband interference and sharp edges in the transmission function of the channel. It was allowed by perfect separation of each subchannel and with preserving the orthogonality between subchannels using the FFT algorithm and utilization of appropriate filters. Half-overlapped FMT modulation allows as well as the DMT modulation optimal utilization of provided transmittion band, because the power spectral density of the signal is flat. But it is not suitable for transmission channels with roughly shaped by changes in the transmission function and narrowband interference. Optimization implementations were designed using parallel processing on the DSP Texas Instruments TMS320C67x series. It thus achieved almost ten-fold reduction in computational complexity. In FMT modulation both options ensure increased signal to noise ratio and thus allow the use of constellation diagrams with a large number of signal elements with the same transmit power and also higher transmission speed.
|
|
|
Bioavailability of metals species in water ecosystem
Tandler, Ágnes ; Řezáčová, Veronika (referee) ; Vávrová, Milada (advisor)
Koncentrace volných kovových iontů je často jen malou částí celkové koncentrace kovu v prostředí. Přes tento malý obsah, je ve většině případů koncentrace volných kovových iontů klíčovým faktorem při určování biodostupnosti a toxicity pro organizmus. Membránová technika Donnan se používá k měření koncentrace volných kovových iontů a v této diplomové práci je ověřena pro směsi kovů (Pb + Cu) při absenci a přítomnosti malých organických ligandů. Olovo a měď jsou environmentálně důležité kovy díky své toxicitě a rozdílným vazebným vlastnostem ve vztahu ke studovaným ligandům.
|
|
|
3D model of Kojkovice municipality nerby Třinec
Szturc, Krzysztof ; Berková, Alena (referee) ; Bartoněk, Dalibor (advisor)
The topic of this thesis is creation of 3D model of part of Kojkovice municipality nearby Třinec. It describes the procedure of measuring and processing measured data. Next part contains detailed process of creation of the TINs both from measured data and from ZABAGED data granted by ČÚZK. Model is created using software ArcMap with 3D Analyst extension. Both models are then compared. The result of the thesis is a digital terrain model of chosen area.
|
|
| |
|
|
Accuracy of measurement using devices for data collection for GIS with the possible use in land consolidation
CIMBALA, Michal
The aim of my thesis was describe a clear form to present the possibilities of facilities for the collection of GIS data for the possible use in land consolidation. My purpose was to accurately determine what the potential cost of purchase and processing of data and how accurately we are able to process this data. Next I have dealt with quality data that we can get from organizations that work with data. I also dealt with the design of land consolidation method using a digital terrain model (DTM). This method could bring a lot of innovation in solving problems in land consolidation in the future
|
|
| |
|
| |
|
| |
|
|
Elaboration and interpretation of map materials in GIS for the Ostrice stream catchment.
HOUDEK, Jiří
The aim of the thesis was the creation and interpretation of thematic layers for the Ostřice stream catchment. First step was collecting all the available maps and comparing them with the actual state. The documents were digitized, and the thematic layers were created. The map outputs were created from these layers and their combinations and were analyzed. The output of this work is a set of GIS layers for the Ostřice stream catchment. This work was processed with the ArcGIS Desktop 9.1 software.
|
|
|
Cration of digital terrain model for the Jeninsky stream catchment and analysis of valley lines.
JURÁNEK, Stanislav
The aim of the thesis is localization and interpretation of paths of concentration runoff in digital terrain model. Digital terrain model(DTM) is processed for the catchment of the Jenín stream, where The Faculty of Agriculture has held the research since the year 2004. For creation of DTM following software programs were used for comparison: Erdas and ArcGIS. Digitalized maps of contour lines for this catchment were the backgrounds for creation of the DTM. Localization of paths of concentration runoff and natural thalwegs was made on created DTM. Then was the comparison of models and the real topography of the catchment realized. Possible reasons of differences were discussed in discussion. Different (in colours and resolution) variations of DTM with localized paths of concentration runoff are the result, with the view of better legibility and more truly representation of real topography of the landscape.
|
guest ::
