|
|
Design of the slab bridge
Strouhalová, Petra ; Krejčík, Vladimír (referee) ; Klusáček, Ladislav (advisor)
This thesis deals with design and solution of road slab bridge structure. Draft prestressing force is processed using the load balancing, the thickness of the slab is consedered in five variants. The aim of this thesis is to determine which option is appropriate for prestressing and which not and subsequently one selected variant design.
|
|
|
Girder road bridge
Tang, Minh Phú ; Požár, Michal (referee) ; Panáček, Josef (advisor)
The subject of the Bachelor thesis is to design a road bridge with a single span. The bridge carries a road of a class III., category S7,5, over the international roads E442. Three studies have been designed. Study C has been chosen for detailed elaboration. It is a monolithic double-girder post-prestressed construction. The calculation of load effects is performed in Scia Engineer 19.1. Only the effect of vertical load effects was considered, while the horizontal effects of the load were not taken into account.
|
|
| |
|
|
Bridge over the Jihlava river
Hibš, Daniel ; Klusáček, Ladislav (referee) ; Panáček, Josef (advisor)
This bachelor thesis deals with the design of a new bridge construction over the Jihlava river in Luka nad Jihlavou. The bridge is located on the road III/4044 at stationing 0,033 km. The bridge evidence number is 4044-1. Three studies were worked out in this thesis. First variant of load-bearing structure projects prestressed beams with composite slab, the next variant suggests dual girder construction and the third variant is prestressed concrete slab. The first study was selected – the bridge made of post-tensioned prefabricated beams with composited reinforced concrete slab. The calculation was carried out in the SCIA Engineer program, and selected outputs were checked by manual calculation. In addition, the time dependent analysis with construction phases was performed.
|
|
|
Design of the simple beam bridge
Zábranský, Ivo ; Panáček, Josef (referee) ; Klusáček, Ladislav (advisor)
The aim of this work is to design a bridge for one field as a counter-proposal against the existing low-bridge. The bridge is designed as a prestressed concrete T cross-section overflowing waterway with a length of 24 meters. The internal forces on the structure were calculated using the software Rfem 5.01 with subsequent manual static calculation of the design according to ČSN EN 1992-1-1 for the serviceability limit state and ultimate limit state.
|
|
|
Highway bridge over the valley Polančice Brook
Dvořáková, Anna ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
Diploma thesis deals with design pre-stressed highway bridge over the valley Polančice Brook and cart track. There are designed 4 studies, from which variantion double-chamber girder with 4 spans in chosen. It is elaborated a detailed structural analysis and bridge is considered a proposal to limit states for temporary and permanent design situations according to European standards - Eurocodes. It is developed drawings and visualization of bridge and construction process.
|
|
|
Design of prestressed box gireder bridge
Hofírek, Radovan ; Jurík, Michal (referee) ; Zich, Miloš (advisor)
This thesis deals with bridging of a lowland valley and the creek Dolanský in the section Jánovce – Jablonov on the Slovak motorway D1. Four variants of the bridge have been developed. Subsequently prestressed single box gilder with large overhangs that are supported by precast struts was selected as the most suitable variant. The construction of the bridge will take place in a formwork suspended on overhead launching scaffolding. The static assessment according to the Europan standard has been drawn up for this variant. The load of the bridge is projected according to the ČSN EN 1991-2 - Traffic loads on bridges and the dimensoin of concrete structures according to the ČSN EN 1992-2 - Concrete bridges - Design and detailing rules. The calculation of load is done using computer software SCIA Engineer 10.1 and Midas Civil.
|
|
|
The bridge over a local brook and relocation of a road
Matuška, Petr ; Zlatuška, Karel (referee) ; Nečas, Radim (advisor)
The aim of this thesis is safe and economical design of a single span bridge over a local brook and relocated cart track in compliance with all valid regulations and standards. Three variants of possible solution were designed from which the one with prestressed concrete trapezoidal slab is preffered. The thesis is mainly focused on the static analysis of the structure and its design documentation.
|
|
|
Suspension footbridge over the river Bečva
Sobková, Sára ; Šopík, Leonard (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design and assessment of a suspended footbridge for pedestrians over the Bečva River. Three variants of the crossing were created. The va-riant with a suspension structure was selected for detailed design. The chosen pede-strian footbridge is composed of two suspension cables supported by an inclined py-lon, anchored by a set of six anchoring cables. The design of the structure relied on finding the ideal geometry of the suspension cables. The computational model was created in the ANSYS Mechanical APDL 2023 R2 software. For the analysis of the deck in the transverse direction, model was created in the SCIA Engineer 21.1 software. The construction was assessed for ultimate limit state of serviceability and load-bearing capacity according to applicable standards, and a dynamic analysis was performed. The work includes clear and detailed drawings and visualizations.
|
|
|
Assembled structure of hall
Bartosch, Václav ; Chalivopulos, Paris (referee) ; Zich, Miloš (advisor)
Master´s thesis describes the design and static calculating of selected elements of prefabricated reinforced concrete hall with bulit-in office, elaboration of basic drawings of the project documentation, shape and reinforcemenet drawings of these selected structural prefabricated elements. The work also includes technical report, details of selected element´s contacts, drawing of plates and study of the behavior of reinforced buildings. Calculation was performed by using a computer program AxisVm, Microsoft Excel a IDEA StatiCa
|
guest ::
