|
|
Interaction in ionic surfactant/non-ionic surfactant/polyelectrolyte system
Pihíková, Dominika ; Sedláček, Petr (referee) ; Mravec, Filip (advisor)
The interactions in an ionic surfactant/non-ionic surfactant/polyelectrolyte system have been studied in this bachelor thesis. The value of critical micelle concentration of cationic didecyldimethylammonium chloride (DDAC) has been determined in three different mediums by fluorescence spectroscopy using Pyrene, Perylene and Nile red as probes. The CMC value of non-ionic octylphenol ethoxylate (Triton X-100) has been determined using Pyrene and Perylene as probes. The aggregation behavior of non-ionic and ionic surfactant with addition of polyelectrolyte poly(sodium4-styrensulfonate) (PSS) and native hyaluronan in aqueous solution has been investigated using Pyrene as a probe. Aggregation number in system of ionic/non-ionic surfactant has been determined by a fluorescence quenching with cetylpyridium (CPC) as a quencher and Pyrene as a fluorescence probe. Interactions in ionic surfactant/non-ionic surfactant/polyelectrolyte system were observed. This result was proved by double sigmoid Boltzman´s type curve. The addition of low molecular as well as high molecular hyaluronan had no significant effect on CMC value of the system.
|
|
|
Microcalorimetric study of interactions between hyaluronan and catanionic vesicular systems
Mach, Jakub ; Pekař, Miloslav (referee) ; Krouská, Jitka (advisor)
Properties of surfactants in water, interactions between oppositely charged surfactants and interactions in system containing didecyldimethylammonium chloride (DDAC), hyaluronan and ion pair amphiphile (IPA) have been studied using isothermal titration calorimetry. For the study of properties of surfactants in water and their mutual interactions, two cationic surfactants have been chosen, namely cetyl trimethylammonium bromide (CTAB) and carbethopendecinium bromide (Septonex), and an anionic surfactant sodium dodecyl sulfate (SDS). For hyaluronan, a molecular weight of 250 450 has been chosen. Critical micelle concentration of the chosen surfactants and enthalpy of the investigated interactions have been determined using the TAM III calorimeter. To prove the interactions in system containing hyaluronan, DDAC and IPA and to determine enthalpy the Microcal PEAQ-ITC calorimeter has been used.
|
|
|
Influence of the preparing of a biopolymer-surfactant complex on its stability and solubilization properties.
Pilgrová, Tereza ; Burgert,, Ladislav (referee) ; Mravec, Filip (advisor)
Influence of the preparing of a biopolymer-surfactant system on its solubilization properties and stability was investigated by using fluorescence spectroscopy and dynamic light scattering methods. Investigation was made on complex of native hyaluronan with cationic surfactant cetyltrimethylammonium bromide (CTAB). System has been studied in aqueous and in saline solutions. The effect of temperature of stock solutions and freezing effect on subsequent properties were investigated. Further was examinated, what effect has a way of introducing fluorescent probe into the system on subsequent solubilization properties. It was found that the conditions of preparing of biopolymer-surfactant system have a significant effect on the solubilization properies and stability of complex.
|
|
|
Model delivery systems for poorly soluble drugs
Sapárová, Alica ; Holínková, Petra (referee) ; Pilgrová, Tereza (advisor)
The solubilizing capacity of micelle–hyaluronan system was studied using the UV-VIS spectrophotometry method. Septonex was chosen as a surfactant and four molecular weights of hyaluronan were used. Solubilization experiments with a hydrophobic dye Sudan Red G and Sudan III were performed in order to obtain a model system of solubilized drugs, which are also hydrophobic. The system was prepared in the environment of mili-Q water. The influence of the molecular weight of hyaluronan on the solubilizing ability has been studied. It was found that concentration of solubilized dyes increases by increasing concentration of micelles in the system and the molecular weight of hyaluronan affects the solubility of the dyes.
|
|
|
Hyaluronan-CTAT hydrogels
Velcer, Tomáš ; Venerová, Tereza (referee) ; Pekař, Miloslav (advisor)
This thesis studies the properties and behaviour of phase-separated hydrogels prepared by interaction of hyaluronan with oppositely charged surfactants. Three representatives of surfactants, namely cetyltrimethylammonium bromide, chloride and p-toluensulfonate (CTAB, CTAC, CTAT), were selected for comparison. Using the method of rheology, the fact that the system of Hya-CTAT forms the most rigid hydrogels has been proved. Higher molecular weight of hyaluronan has also direct influence on the volume and stiffness of the newly formed hydrogels. Preparation methods were compared as well. Mixing the stock solutions of entry components appeard to be the most suitable. Small-angle X-ray scattering was used for determination of shape and size of surfactant's micelles, concluding that it has no effect on the volume of formed gels. The results of this study indicate that given gels are to a certain extent competitive and incorporation of hyaluronan into their structure is desirable with respect to its biological activity. This offers a potential usage of these substances in the field of medical applications.
|
|
|
Characterization of coloid particles by excited-state proton transfer with advanced fluorescence techniques
Kotouček, Jan ; Mravec, Filip (referee) ; Pekař, Miloslav (advisor)
The deprotonation characteristics of fluorescent probes -naphthol and 8-hydroxypyrene-1,3,6-trisulphonic acid (HPTS) were studied in this diploma thesis, using steady-state and time-resolved fluorescence spectroscopy. Two cationic surfactants, Septonex and cetyltrimethylammonium bromide (CTAB), were studied. These surfactants were measured in the complex with hyaluronan (1.75 MDa, 1 MDa and 300 kDa). Steady-state fluorescence was used for determination of critical aggregation concentration of each surfactant and pKa*. Time-resolved fluorescence decays were used to calculate the average lifetimes and the deprotonation constants of naphthol and HPTS. The measurement with hyaluronan were compared with the polystyrenesulfonate (PSS) – surfactant system. The effect of hydration shell of hyaluronan on hyaluronan – surfactant complex formation results from the comparison of above mentioned systems. Large differences were found in the deprotonation characteristic between surfactants and even between individual molecular weights of hyaluronan. The measurement shows that the hydration shell is located near to the dissociated carboxyl groups of hyaluronan chain, where the interaction with the positively charged surfactants occurs. Furthermore, the aggregation number of Septonex was determined by quenching of pyrene using cetylpyridinium chloride (CPC) as a quencher. The aggregation number for 20 mM Septonex solution was determined as a value of 104 molecules. CPC was used for confirmation of the localization of -naphthol in the micelles of CTAB and polymer – CTAB, respectively.
|
|
|
Passive microrheology of colloidal systems based on biopolymers.
Bjalončíková, Petra ; Burgert, Ladislav (referee) ; Mravec, Filip (advisor)
Diploma thesis was aimed to deal with evaluation of microrheology method in the research of biopolymer-protein. Used biopolymer was sodium hyaluronate and proteins were trypsin and chymotrypsin. For measuring of microrheology were used particles with different radius (0,5 m and 1 m). It was found, that both substances have viscous charakter. Passive microrheology is suitable for measuring the viscoelastic properties of biopolymers.
|
|
|
Support of physical interaction between hyaluronan and selected hydrophobic solutes
Michalicová, Petra ; Kislinger, Jiří (referee) ; Pekař, Miloslav (advisor)
The method of fluorescence spectroscopy was applied for the studying of the way of the hyaluronan-fluorescence probe system`s preparation on mutual interaction in water. Several experiments with fluorescence probes pyrene, prodan, perylene and diphenylhexatriene (DPH) had been submitted. The first part of the experiments deals with the verification of the results of T. Brown`s work and it was focused on the study of simple interaction between hyaluronan and hydrophobic compounds. In the second part of the work hyaluronan was dried at higher temperature followed by adding of the fluorescence probe. The aim of this method was the distraction of hyaluronan`s moisture packaging and the opening up the hydrophobic parts of the chain for the fluorophore. Although wide concentration ranges of fluorescence probes had been tested in the first experiments, the interactions hadn`t been observed. The similar results were obtained in the second part of the experiments.
|
|
|
Study of interaction in biopolymer-surfactant system
Sovová, Šárka ; Mondek, Jakub (referee) ; Pilgrová, Tereza (advisor)
Interaction between biopolymer-surfactant and stability of arising complexes were investigated using dynamic light scattering method Stability of the system and interactions between native hyaluronan and cationic surfactant cetyltromethyl-amonium bromide in aqueous solution depending on preparation method were investigated. System was prepared either adding CTAB to hyaluronan causing sequential micelle’s formation, or adding hyaluronan to already formed micelles. It was found out that preparing method influences properties of arisen complexes. Molecular weight of hyaluronan has an inconsiderable effect on interaction against to concentration of hyaluronan, which influences interaction of component significantly.
|
|
|
Comparative study of interaction between surfactant and hyaluronan and different polyelectrolytes.
Stiborský, Filip ; Pravda,, Martin (referee) ; Pekař, Miloslav (advisor)
In this diploma thesis, the interactions between polyelectrolyte and surfactant at low and also at high concentration were studied. There was used pyrene as fluorescent probe during the fluorescence spectroscopy measurement, a cationic surfactant cetyltrimethylammonium bromide and as a main polyelectolyte has been chosen sodium polystyrene sulfonate at 1 MDa molecular size. In the medium containing 0.15 M NaCl we could observed a creation of the complexes – precipitates in the surrounding of CMC concentration and behind of this concentration. In the mixtures containing sodium polystyrene sulfonate and hyaluronan together, there was stronger tend to keep aggregation properties of sodium polystyrene sulfonate during difference concentration ratios. Beyond CMC concentration, hyaluronan starts to influence the aggregation properties of the system as well.
|
guest ::
