|
|
Steam boiler for straw 10t/h, 320°C
Truhlář, Marek ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is design a grate steam boiler for burning straw with an output of 10 tons of steam per hour. The produceds team has parameters 320 °C, 3,2 MPa. For a given fuel (fytomass) is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of steam and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.
|
|
|
Cooling systems for polyfunctional object.
Milatová, Adriána ; Blasinski, Petr (referee) ; Formánek, Marian (advisor)
The diploma thesis deals with the design of cooling devices of a fourteen-storey polyfunctional building with administration part and housing units. The thesis describes the physical nature of cooling, the basic types and functions of cooling systems and legislation related to cooling devices. Two types of cooling systems are selected and developed for the assigned object at the building permit design level. The work includes calculations of all elements of individual systems. The purpose of this diploma thesis is the comparison of these variants and the evaluation of suitability for use on the individual parts of the assigned building. The variant chosen is elaborated at the level of the rea-lization project, including the drawing documentation.
|
|
|
Steam Boiler with grate firing RDF 70t/h, 4MPa, 400°C
Mokriš, Lukáš ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
The goal of this Master’s Thesis is to design a refuse derived fuel (RDF) fired steam boiler with 70 t/h processing ability. The assignment consists of requested output parameters of overheated steam and analysis of fuel components. This analysis was used for stoichiometric calculation of fuel. Furthermore, heat balance of the boiler was calculated, from which was determined the heat loss and the efficiency of the boiler. Individual designs and calculations of heating surfaces and boiler dimensions were carried out from requested output parameters.
|
|
|
Gas Boiler for Blast Furnace and Coke Gas Mixture Combustion
Dohnal, Jakub ; Svoboda, Petr (referee) ; Svoboda, Petr (referee) ; Lisý, Martin (advisor)
This diploma thesis deals with the constructional and calculation design of boiler for blast furnace and coke gas mixture combustion, including sizing of the heating surfaces. The opening section is dedicated to a brief characterization of burned fuels. The following chapter shows the parameters and composition of the resulting fuel mixture. The main part of this thesis involves; determining the stoichiometric amount air required for combustion and the resulting flue gas, determining the boiler efficiency and steam production rate, calculations regarding the combustion chamber and the detailed design of the individual heat exchangers. At the end of the thesis the heat balance of the entire boiler is verified. Drawing documentation of boiler is also part of this diploma thesis.
|
|
|
Steam boiler for sorted waste burning 85t/h
Vítámvás, Zdeněk ; Baláš, Marek (referee) ; Skála, Zdeněk (advisor)
This thesis deals with a project of steam boiler to combustion of refused-derived fuel. With respect of required fuel and output parameters of the steam was worked out stoichiometry, energy loss and boiler efficiency, heat flows was allocate to individual heat exchange surfaces. The heat exchange surfaces was calculate and project in detail.
|
|
|
Design of Electric Steam Heater
Pekárek, Michal ; Šulák, Marek (referee) ; Lisý, Martin (advisor)
This master’s thesis is focused on the design of electric steam generator for superheated steam. Using heating cartridge is the easiest way how to make a saturated or superheated steam. This device is part of gasification reactor, which is used for experimental purposes. The thesis includes schematic involvement of technology. Technology contains evaporator and superheater. The evaporator is calculated as pool boiling. The superheater is design for steam flowing through heating cartridge bundle. At the end of the thesis are made projection drawings, which are based on the calculations.
|
|
|
Usability of stillage from ethanol production
Audy, Dan ; Večeř, Marek (referee) ; Leštinský, Pavel (advisor)
This work solves the use of stillage from ethanol production. Also solves processing into material DDGS and then solves the material and energy balance. This material and energy balance was calculated for 7070 kg of stillage per hour. The final energy requirements of the process were based on the amount of stillage produced to obtain 1 m3 of ethanol. The results of this work offer an insight to the problems of processing stillage. Thanks to conversion for 1 m3 of produced ethanol, results is also offerring the possibility of fast conversion of an approximate energy needed for devices of other capacities.
|
|
|
Grate RDF Boiler
Krolák, Michal ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
This master's thesis deals with design of steam grade boiler for burning refuse derived fuel with power output of 70 t/h. The assignment contain a requiered steam output parameters and composition of fuel. From this composition of fuel is calculated stoichiometric calculation, the heat loss and the efficiency of boiler. After that follows a design of the boiler with closer design of each of the heating surfaces.
|
|
|
Steam boiler for fytomass
Baláš, Jiří ; Ing. Obrovský (referee) ; Skála, Zdeněk (advisor)
The purpose of this Diploma Thesis was the construction design of the steam boiler for fytomass. For the specified parameters of biomass have been gradually implemented stoichiometric calculations of which are further based calculation of enthalpies of combustion gas. In the next part have been dealt with heat balance of the boiler, the efficiency of the boiler, recirculation of exhaust gases and the temperature of the combustion gases in outlet from fire. Thereinafter, the proposal of particular heat surfaces of steam boiler was solved, so that the resulting number and size correspond to the desired parameters. The parameters are temperature, pressure and the amount of steam.
|
|
|
Change John Thomson boiler fuel base
Hradecký, Martin ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This Thesis deals with thermal control calculation of the existing John Thomson steam boilers burning heating mazut and subsequent thermal conversion to natural gas. The main parts of the calculation are as follows: stoichiometry, thermal balance, conversion of the combustion chamber and heating area.
|
guest ::
