|
| |
|
|
Location of vibration around the optical fiber
Dorazin, David ; Urban, František (referee) ; Čučka, Milan (advisor)
This diploma thesis solves possibilities of utilization optical fiber as sensor. At the beginning, basic division of this sensors is desribed, their principles and usage. Then the thesis is focused on distributed sensors based on the interference of the light, interferometers. This optic fiber interferometers are described, mainly their modifications for detection and localization of vibrations along optical fiber. Significant part of the thesis deals with dual Mach--Zehnder interferometer. This interferometer is theoreticaly desribed and simulated in Matlab. Further the thesis deals with development of two aplication in Matlab software. One application is for simulation and theoretical computation of dual Mach--Zehnder interferometer. Second application serves for signal processing of acquired data that are measured on this interferometer. At the end of the thesis, dual Mach--Zehnder interferometer is designed and build in laboratory enviroment and executed measurement and localization of vibrations using this interferometer.
|
|
|
GUI for the processing of measurements from the optical reflectometer
Vitek, Vojtech ; Jurčík, Michal (referee) ; Münster, Petr (advisor)
This diploma thesis is focused on realisation of the application, that process and display measured data from OTDR device. The first section describes optical fibers, transmission characteristics of fibers and measurement methods of the attenuation on optical path. The second section describes the principle of the OTDR method and measured events on optical path. Final part is dedicated to realisation of the appication by the assignment.
|
|
|
Design, implementation and measurement of passive optical network
Kužela, Jan ; Horváth, Tomáš (referee) ; Vojtěch, Josef (advisor)
The aim of this thesis is to formulate the design of optical access network in designated area. The design is focused on the physical network layer and it covers optical fibers, cable protectors and links, optical hubs, racks and active components. The thesis also docu- ments network architecture, the configuration of active components and provides results from monitoring of selected network segments. The thesis consists of the theoretical part and practical part. In the theoretical part, there is an introduction to optical networks, their configurations (FTTH, FTTB, FTTC, FTTN), relevant networking standards and technologies. The practical part of the thesis covers design proposal of a network located in Slavičín. The design reuses infrastructure and technologies of existing network. The proposed design follows FTTH architecture which has benefits of low maintenance cost and it also fulfills GPON standard.
|
|
|
Optical Distributed Sensor Systems
Dorazin, David ; Münster, Petr (referee) ; Čučka, Milan (advisor)
This bachelors thesis solves possibilities of utilization optical fiber as a sensor. At the beginning the thesis desribes basic principle of ligh transmition in optical fiber, optical fiber and his linear and nonlinear properties. Second part of the thesis deals with sorting of distributed optical fiber sensors and describes each type of the sorted sensor due to principle which they work on. The Michelson interferometer is described and its modification in the form of the Fiber optic Michelson interferometer, which is designed and simulated in the VPIphotonics software. At the end of the thesis is performed measuring of vibrations by the Fiber optic Mach-Zehnder interferometer.
|
|
|
Testing of optical networks
Šimoník, Jan ; Horváth, Tomáš (referee) ; Filka, Miloslav (advisor)
The aim of this bachelor thesis is to describe testing of optical networks physical layer by norms and recommendations (CSN, ITU and RFC). The first chapter provides a description of the individual optical fibers, their division and a brief description of each type. In the next part of this thesis, the methods and procedures for testing the various parameters of optical networks are described, according to specific standards and recommendations. The issue of testing quality of services is also described, primarily focused on triple play services, which are operated at optical access networks. The following is a description of the issue of access and transport networks, a draft of methodology for testing the physical layer of these networks is given. In conclusion, there is a chapter describing the practical measurements made on a passive optical network. In the annexes of this thesis the limit parameters of optical fibers used for the measurements and draft of the content for measuring protocol are listed.
|
|
|
Measurement of the optical fiber
Procházka, Jakub ; Dostál, Otto (referee) ; Filka, Miloslav (advisor)
This bachelor's thesis deals with measurement methods of optical fiber. In the thesis, methods for measurements of attenuation, chromatical dispersion, and polarization mode dispersion are discussed. The thesis also deals with methods for measurement of attenuation of passive components and their reflections loss. Also discussed are parameters of selected types of optical fibers, basic findings about optical transmission and principle of wave multiplexing. The practical portion of the thesis deals with measurement of a new optical polygon in the Academic Optical Network in Brno.
|
|
|
Connecting the TV studios
Flimel, Peter ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
In this bachelor thesis work is done TV link study in 2020, for the purpose of mediation football matches between studies in Prague and Bratislava. This work deals with optical connections and technology matters to revel in the transmission of large amounts of data.
|
|
|
Optical fibre sensors
Gallo, Martin ; Šifta, Radim (referee) ; Münster, Petr (advisor)
The aim of this thesis is to examine in detail the possibility of fiber as optical sensor. This work deals with optical fiber sensors, their distribution and use. Describes the most renowned types, their advantages and disadvantages. At the beginning of this thesis there is an introduction to optical fibers, description of well-known linear and nonlinear phenomena occurring in them, development of optical sensors. Sensors are cleraly divided by usage and common attributes. The paper focuses on distributed optical fiber sensors and includes two different designs of these sensors there are also basic principles in designing distributed sensors. At the end of the work, the sensor using Brillouin scattering measuring vibration is simulated in the simulation program. Viewed transmitted signal spectra are shown and conclusions of results are drawn.
|
|
|
Reliability, security and transfer parameters of optical cables
Kučera, Zdeněk ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
Communication via fiber optic cable is the latest advancement of the transmission media currently used for data transmission. Despite initial problems, using of this medium in recent years has greatly expanded due to their indisputable advantages. Optical cable is a great combination of reliability and security of data transfer. Its constantly improving transmission parameters contribute to the high speeds in the long-distance transmission of data. In the theoretical part of this work some kinds of optical cables are mentioned, also the most important parameters and the most widely used methods of measurement of these cables. The comparison and evaluation of the measured values of attenuation and the real length of optical paths was done by several types of measuring instruments in the practical part.
|
guest ::
