|
|
The development of high performance concrete with secondary raw materials
Osuská, Lucia ; Ťažký, Tomáš (referee) ; Hela, Rudolf (advisor)
The thesis is focused on the possibility of using secondary energy resources as an additive to concrete to improve some of its resulting properties. The theoretical part is devoted to the problems of shrinkage and prominence hydration process during hydration of the concrete. This section also contains the results of research work from domestic and foreign sources of high temperature fly ash and fluidized bed combustion fly ash use and their using in concrete. The practical part verifies the possibility of using these materials and their combination as an additive to concrete with impact on the physical and mechanical properties.
|
|
|
Cast-in-place tank of sewage plant
Kustyánová, Orsolya ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a cast-in-place reinforced concrete tank of sewage plant in the village Vrbice. Tha main parts of the thesis are the technical report, static analysis, drawing documentations, construction process and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation constists of shape and reinforcement drawings of supporting parts.
|
|
|
Nonlinear Analysis of Composite Cross-Section With Respect To Effects of Shrinkage, Creep, Ageing and Temperature
Hron, Lukáš ; Kulhavý,, Tomáš (referee) ; Čajka,, Radim (referee) ; Vráblík,, Lukáš (referee) ; Navrátil, Jaroslav (advisor)
Advanced computational methods for the analysis of building structures are used more often in engineering practice. Their use is enforced not only by the demands for aesthetics, functionality and high economy of the construction, but often directly by code provisions and requirements. Therefore, it is necessary to provide for an engineer the robust, but transparent tool, which can be used for an efficient design of structure all over it's design working life. This work deals with the creation of a computational system for time dependent analysis of concrete and composite structures. It is assumed a solid or composite concrete section with possible application of pre-tensioned and/or post-tensioned tendons. Each phase of step-by-step build composite cross-section has a general geometry. The used algorithms give us the possibility of a detailed analysis of the structure in individual construction stages, provide the designer better view on the behavior of structures with respect to concrete aging, shrinkage and creep, relaxation of prestressed tendons and provide an information on the redistribution of internal forces in the structure and in different phases of the cross-section. Stress state of the structure calculated in this way come in useful further in the design and checking of ultimate and serviceability limit states. Results of time dependent analysis are verified by manual calculations and by comparing with the results obtained by simplified methods.
|
|
|
Foundations in Volume Unstable Soils
Legut, Dana ; Weiglová, Kamila (referee) ; Hauser,, Jaroslav (referee) ; Zdražil, Karel (referee) ; Vašina,, Josef (referee) ; Paseka, Antonín (advisor)
This dissertation is concerned with the foundations in volume unstable soils and objects disorders which are related to this. The thesis was focused on the study of clay and loess soils which are abundant in the geological profile of the Czech Republic. First, the formation of the two groups of soils is introduced, then their properties are examined and finally the influence of vegetation on the former type and the influence of collapsibility in the latter type are investigated. The conclusion is, in fact, a recommendation on the design of structures so that the system of clay / structure is not damaged and that structures are not subject to renovations. Several instance of problems with structures are discussed which were subject to structural repairs employing both a civil and geotechnical engineers.
|
|
|
Load-bearing reinforced concrete construction
Klajba, Daniel ; Hasala, Ivo (referee) ; Šulák, Pavel (advisor)
The aim of diploma thesis is to design monolithic reinforced concrete underground structure, which is partly under existing building and partly will form the basis of a new outbuilding. Structure is designed as white tub, whitout any additional isolations against water a ground humidity. All structure elements (slabs, walls, beams) was designed according to standard ČSN EN 1992-1-1 for ultimate and serviceability limit state. Structural analysis was performed using Scia Engineer 2013 – Student version. The results were validated by simplyfied manual method.
|
|
|
Design of steel-concrete composite structure of road bridge in Trenčín
Doležal, Tomáš ; Marván, David (referee) ; Nečesal, Petr (advisor)
The aim of diploma thesis was to design alternative of composite road bridge in Trenčín. The bridge beam is designed as continuous with theoretical span of 65 m + 106 m + 65 m. Permanent load, climatic load (uniform and nonuniform temperature variation, windload), shrinkage, differential settlement and traffic load were taken into consideration according to Eurocodes. Technical report, static report, drawings, bill of quantities are included. Computational model for evaluation of internal forces was carried out in SCIA Engineer software.
|
|
|
Numerical analysis of selected silicate based composites shrinkage
Drbušková, Magdaléna ; Vlk, Zbyněk (referee) ; Keršner, Zbyněk (advisor)
The thesis is divided into two main parts. In the first theoretical part is described the problems of shrinking including a comparison of Czech standard and Model Code 2010, Vol. 1. The second practical part of the master`s thesis is focused on the numerical analysis shrinkage primarily on the initial stage of this process. The experimentally obtained data are set approximations of the relative deformation using ShrCeC. Subsequently the numerical simulation of shrinkage of selected silicate specimens using a computer applications SpatiDist and FyDiK 2D. The real test specimens are modelled as two-component composite consisting of cement paste and aggregates. The result is a parametric study takes into account the influence of type and size of grain aggregate.
|
|
|
Physical Discretization Modelling of Shrinkage
Bedáň, Jan ; Keršner, Zbyněk (referee) ; Frantík, Petr (advisor)
The aim of this thesis is design and programming of a numerical model of shrinkage of cement composites using physical discretization and solved by parallel processing. Introduction is about the shrinkage of cement composites and explanation of terms, which are included in this thesis. The main part deals with programming of the output model, the procedure of its creation and the results of simulations.
|
|
|
Sludge Digester Tank
Hurčík, Vít ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
Master’s thesis deals with the design and assessment of the bearing structure of sewage treatment plant and development of the drawnings. The thesis solves the main part of the structure: base slabs, walls and ceiling slabs. Thesis solves the ultimate limit state and ultimate limit serviceability.
|
|
| |
guest ::
