|
|
Detached house with the hairdressing saloon in Zdiby
Klečková, Tereza ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The bachelor thesis deals with the project of a polyfunctional detached house with hairdressing salon in Zdiby. The detached house has three above-ground floors and a partial cellarage. There are two housing units in the building, along with the hairdresser’s facility on the ground floor. The facility part is separated from the residential part and it´s operation is provided by the residents. The entrance to the family house is from the north side of the building. The building has a shape composed of rectangular parts and is covered with a single-layer flat roof. Individual rooms are located in the building so that the living rooms are situated mostly to the South, ensuring that they are sufficiently sunny. The detached house is designed from a single masonry system. The vertical constructions are made of Porotherm ceramic pieces. The Spiroll ceiling panel is used for horizontal construction. During processing, emphasis was placed on layout solutions, architectural appearance, statics requirements and safety of use.
|
|
|
Sports center with restaurant in Holěšov
Fridrich, Michal ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.
|
|
|
Mixed-use building in Brno
Kopecký, Lukáš ; Mizerová,, Lenka (referee) ; Smolka, Radim (advisor)
This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.
|
|
|
Wellness hotel "Na Ovčačce" - Svatý Kopeček u Olomouce
Spurný, Martin ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.
|
|
|
Mountain Hotel with Wellness
Kopečková, Kristýna ; Konečná, Petra (referee) ; Králová, Zuzana (advisor)
The subject of my thesis is the design mountain guesthouse with a wellness centre, which is located in the village of Mala Morávka, at the level of documentation for construction. The new building is located in the cadastre unit Karlov pod Pradědem. This is a two floors, slab-building L-shaped with separate parking for visitors of boarding house and wellness centre. The structural system is composed of ceramic blocks Porotherm and reinforced concrete joist floor. Roof structure is made up of wooden trusses girders saddle shape. Design of mountain guesthouse with wellness centre respects the territorial plan of the village of Malá Morávka.
|
|
|
Block of Flats
Jánská, Kamila ; Lavická, Radomila (referee) ; Lavický, Miloš (advisor)
Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.
|
|
|
Sports centre Polička
Svoboda, Jan ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.
|
|
|
Minibrewery in Vyškov
Zvolský, Dalibor ; Rozehnal, Miroslav (referee) ; Štěpánek, Ladislav (advisor)
The master’s Thesis – Minibrewery in Vyškov, has a form of project documentation which contains relevant requirements according to valid regulations. The proposed building is situated on the plot number 2123/72 in the city Vyškov. It is a detached building which stands separately on the flat terrain. It is a two-storey building with partial basement. It is formed from three units – a minibrewery, a brasserie with kitchen and an administrative part. It is made of monolithic reinforced concrete frame, brick blocks with vegetative flat roof. The upper level attic gable is at the height of 8,880 meters. The seminar paper – minibrewery in Vyškov – is a part of the Master’s Thesis.
|
|
|
Block of Flats
Poláková, Jana ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The object of this work is the preparation of project documentation for construction of a block of flats building containing all requirements in accordance with applicable regulations and standards. The building is located on sloping terrain on land 553/14, 553/15, 553/16 and 553/17 in the cadastral area Nemošice. The building has three overground floors containing a total of eleven residential units and one underground floor, which is partially below ground, where the six individual garages and cellars. Perimeter walls floors are made of ceramic bricks, underground floors of concrete bricks. Masonry is fitted with contact system. Ceilings are made of prestressed concrete ceiling panels, flat roof single casing.
|
|
|
The villahouse in Polička
Svoboda, Jan ; Kozáček, Martin (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis deals with the processing of project documentation for a new building called VillaHouse. The building is located in the southeastern part of the City of Polička. This is a three-story apartment building with a flat roof. The building has main and side entrances. The main entrance to the building is wheelchair accessible. The first floor has been designed with storage areas as well as a staircase and vestibule. The second and third floors are designed with 6 separate apartments. The apartments are of different size categories (2 + 1, 3 + 1, 1 + kc, 2 + kc and 2 x 3 + kc). The building has sheltered parking for 6 cars. The footings of the building are made of plain concrete. The supporting and perimeter walls are made from ceramic blocks. The ceiling constructions are made of prestressed reinforced concrete panels SPIROLL. The external walls are insulated with contact insulation ETICS.
|
guest ::
