|
|
Design of switching class audio power amplifier
Bronec, David ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
This bachelor thesis is dealing with the issues of the switched category output amplifiers and its aim is to design and to construct a stereo amplifier with the energy output about 100W. The amplifier is constructed in the switched category D. The design of the corrective preamplifier with the correction of depths, heights and the balance functions is also described. Furthermore, this thesis deals with the description of the switched power supply with the TOPswitch control circuit. The design is also supplemented by the simulations and the printed circuits of each part. There are also some photographs of the device and the measurement protocol is included too.
|
|
|
Traction DC/AC inverter 2,5kW for an induction machine of an electric garden tractor
Krist, Petr ; Patočka, Miroslav (referee) ; Vorel, Pavel (advisor)
This thesis deals with the proposal of power 3-phase DC/AC inverter for an induction machine of small garden tractor. It concerns the choice of a voltage level of DC link, dimensioning of the power circuit, drivers for power transistors, implementation of metering and protection and also processor driving. The whole thing ends at proposal of PCB in the software program called EAGLE and PCB manufacturing. So we also check if the theoretical calculations are correct and if the whole drive works.
|
|
|
Hybrid headphone amplifier for the high-end listening and performance
Čacký, Adam ; Šotner, Roman (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor´s thesis describes the design of a high quality small portable headphone amplifier for dynamic headphones. Part of the work is theoretical assumptions for the optimal design and implementation of peripheral involvement, comparing the properties of components used and the resulting parameters of modeled device. Analyses of the electrical quantities of the circuit created in simulation software are enclosed.
|
|
|
Converter for high-speed induction motor
Veselý, Petr ; Pazdera, Ivo (referee) ; Procházka, Petr (advisor)
The semestral thesis deals with designing a frequency changer. It describes general information about induction motors and power electronics, focusing on pulse converters. Based on given parametres, appropriate components were chosen and described. Also, there is power loss calculated in this document, which is used for dimensioning cooling. Also an LC filter is designed in this dokument. At last, there is a printed circuit board designed for the power part.
|
|
|
Study of Hydration Process of Anhydrite Binders
Verner, Filip ; Vavrušková,, Lenka (referee) ; Gazdič, Dominik (advisor)
The presented work deals with the study of hydration processes anhydrite binders with external exciters. Work is divided into two parts. Conceptually is this work divided into two parts The theoretical part of study contains general theory of gypsum binders, anhydrite binders and research at the institude THD. In the experimental part deals with proposal of recipes, making of samples and subsequent determination of main technological tests and monitoring hydration process by the XRD and DTA analysis.
|
|
|
Comparison of switching LED drivers
Káňa, Vojtěch ; Šotner, Roman (referee) ; Frýza, Tomáš (advisor)
This bachelor thesis describes switching LED drivers and their features. Is chosen and compared five integrated circuit, that one of them will be included in two different topologies. Especially in Buck-Boost and SEPIC configuration. Their characteristics and features will be simulated and designed in suitable software. Made equipment will be tested and compared their achievements properties. For a both of these drivers is required specified conditions as constant output current, input and output voltage.
|
|
|
DC/DC converter
Němec, Martin ; Kuzdas, Jan (referee) ; Procházka, Petr (advisor)
This project deals with transistorized converters in particular a four-quadrant bridge. The main part of project discusses the drivers of transistors and a possible way of controlling a converter. The proposal of control electronics and the regulation structure are involved in the second part. This project also includes a construction of an apparatus which will be used as a teaching material.
|
|
|
Class D audio amplifier for active loudspeakers
Cupák, Jan ; Punčochář, Josef (referee) ; Kratochvíl, Tomáš (advisor)
This master's thesis deals with design of D class audio final amplifier, which was output power 400 W for 4 ? load impedance. Designed audio amplifier is specifical for active speaker, which consists of satelite speakers and subwoofer. Further more it deals also with other functional blocks, e.g. balanced input preamplifier, active crossover and protection for safety running. Outcome of this work are schemes of each functional blocks of D class audio amplifier, whose functionality was verified by simulation. Thesis also contains full reference material including mechanical arrangement of functional blocks on printed connection board. The conclusion contains the measured parameters of function blocks of produced prototype and complete photographic documentation.
|
|
|
The inverter based battery charger
Kadlec, Josef ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
The aim of this master’s thesis is provide detailed information about car battery’s charger with a switching power supply. The kind of this power supply is one-pulsed conducting inverter with transformer. The charger’s rates of nominal voltage are 6 and 12 V. The method of charging is charging by constantly voltage with a current limitation. The values of a current limitations are 0.5A, 5A and 20A. The charger’s maximal current is 50A. This current can help to the accumulator with starting of a vehicle. This device is equipped by indicators which indicate the end of charging.
|
|
|
Switching power supply based on high voltage Si/SiC MOSFET transistors
Darida, Slavomír ; Procházka, Petr (referee) ; Pazdera, Ivo (advisor)
Bachelor’sthesis is based on semestral thesis, which was focused mostly on problematic of switching power supply design with following parameters 3x400V AC/15V DC, 3,333A. Bachelor’s thesis adds algorithmic calculations of converters winding parts for forward converter and also for flyback convertor. These algorithms are created with Matlab. Next extension is design of two different forward convertor’s conceptions. Current mode PWM regulation is the first one and voltage mode PWM regulation is the second conception. Because current transformer is needed for secondary current sensing in first conception, its design is added also with algorithm calculation. Important is that both of these conceptions are using same excitation system. Excitation system functional tests are classified at the end.
|
guest ::
