|
|
Entrance hall of multi-storey building in university area
Jež, Matěj ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The objective of the bachelor thesis is to design and verify sufficient resistance of load-bearing construction system and cladding made of structural glass. The object is located in university campus at the suburban area of the city of Ostrava, in district Ostrava Poruba. Floor plan is 8,5 x 12 m. The object is composed of six floors and its total height is 21 m. The object is connected to rest of the building. Main load-bearing system consists of frame made of composite steel and concrete rectangular columns and steel beams. Staircase steel beam and reinforced concrete slab are ensuring spatial rigidity. The object was designed according to currently valid standards using ultimate limit state and serviceability limit state verification.
|
|
|
Procedural parameters at Inconel 625 cladding
Hrádek, Jan ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
The research is focused on cladding of inconel 625 using the MAG - CMT method. It was found that welding without an oscillation does not create the necessary geometry to establish additional layers. When welding with an oscillation, it was researched that the current between 150 and 200 A appears most appropriate in the synergistic mode for welding inconel 625. The resulting weld bead was made at a current of 190 A with pulse dynamics correction set to -4 and correction of arc length to +10 and welding speed of 315 mm per minute.The weld bead was not ideal mainly due to insufficient height. The improvement of results could be achieved by set oscilation with fluent change in acceleration. Because of the time options and difficulty of programming it was used only constant speed for all experiments.
|
|
|
Construction Project for Implementation of Industrial Hall for Automotive Industry
Světlík, Jiří ; Liška, Pavel (referee) ; Nečasová, Barbora (advisor)
This diploma thesis deals with construction technology project of a newly-built automotive industrial hall on the complex Hauk – Police nad Metují. The aim of the main construction object is to build a double aisle steel hall for industrial purposes including maisonette built-in which will become social and technical facility for prospective workers. The main construction facility is complemented by secondary structures, creating functional complex for required purposes. The thesis is focused on implementation of the main load-bearing prefabricated steel structure and cladding made of selected system. An integral part of the thesis include main technology phases realization study of the main construction object, a technological prescription filled-in with assembly drawings, a design of machine assembly including dealing with its transportation, a site equipment project, time schedules, a budget, a test and inspection plan and a security measures design for selected risks. The thesis is suplemented by a specialized section dealing with the heating of reinforced landscaping.
|
|
|
Construction Technological Project of a Heat Feeder in South Bohemia
Handlíř, Jan ; Hejl, Martin (referee) ; Mohapl, Martin (advisor)
The subject of the diploma thesis is a technological construction project of heat feeder on the hot water pipeline between České Budějovice and nuclear power plant Temelín. The main object is an industrial hall made of steel and brick administrative part. The hall is a steel structure clad with sandwich panels. The administrative part is single-storey building from bricks and has a flat roof. The construction also includes an access road with car park.
|
|
|
Multipurpose Hospital Building in Český Krumlov - Building Technology Project
Mikulášek, Jiří ; Nečasová, Barbora (referee) ; Liška, Pavel (advisor)
The diploma thesis is focused on the elaboration of a construction technology project for the construction of a new hospital pavilion in Český Krumlov. The thesis processes the preparation of construction and proposal of the organization of individual activities on the construction site in time sequence. The thesis contains technological regulations for the foundation of construction and realization of the monolithic frame on the 1st floor, which also includes drawings of the formwork of the ceiling slab and a scheme of formwork of columns and walls. Further contents are technological report, technological study of realization, transport relations, time and financial plans, complete construction site equipment for the whole construction phase, design of construction mechanisms and assessment of their suitability for use, resource balance, technological analysis, itemized budget, and occupational health protection for selected processes and noise studies dealing with the impact of building construction on the surrounding development.
|
|
|
Static design of the structure composed of combination of steel and structural glass
Potůčková, Simona ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The objective of the bachelor thesis is to design the load-bearing construction system and its cladding made of a combination of steel and structural glass and to verify its sufficient resistance. The object has rectangular floor plan with dimensions of 7,5x10,5 m and and its total height is 24,5 m. The building is located at the suburban area of the city Ostrava, precisely Ostrava Poruba. The construction is composed of a ground floor and six upper floors. The main load-bearing system consists of steel frame formed by six tubular columns connected beams and sway bracings ensuring the spatial rigidity of the structure. The object was designed according to currently valid standards using ULS and SLS verification.
|
|
|
Production and storage hall Jindřichův Hradec - rough upper construction
Hirsch, Roman ; Bříza, Lukáš (referee) ; Biely, Boris (advisor)
The focus of this thesis is on the description of realization of rough upper construc-tion of warehouse in Jindrichuv Hradec. The thesis consists of report on construction and technology, technical report on site technologies, wider transportation connections, technological guidelines for prefabricated reinforced concrete frame, proposal for the machinery assembly, report on safety and health protection on construction site, envi-ronmental requirements, control and exam plan for prefabricated reinforced concrete frame and in lastly also financial comparisons of brick construction and mounted struc-ture. The annexes consist of blueprints for the site technologies, scheme of the cargo distribution in the trucks, routes of wider transportation connections and also detailed budget with timeframe.
|
|
|
Theoretical design of the steel production hall
Ratica, Filip ; Strejček, Jan (referee) ; Kalivoda, Milan (advisor)
The bachelor´s thesis contains a summary of the steel structural types of the halls and the principles of designing the steel supporting structure of the hall building. The thesis deals with the design of the layout of the hall, the individual elements of the structure, such as columns, purlins, trusses, crane runway and also roof and perimeter cladding. Furthermore, the thesis contains machining and other processes in the production of steel structural elements of the hall. And finally, the technical and economic requirements and costs of the construction of the steel hall are evaluated.
|
|
|
Steel Structure of Industrial Building
Buchta, Vojtěch ; Horáček, Martin (referee) ; Brosch, Petr (advisor)
The diploma thesis deal with design of a technological building in Ostrava serving for the sorting of slag to enagle its sequential use. Geometry of the structure was customized to technological requests. Static system was considered in two versions – joint connections with vertical bracing and omni-directional frame. For detail processing was chosen the joint one, besause it showed up as more advantageous. Static calculation was performed by Scia Engineer 14 software, then some typical connections and drawings were manually designed.
|
|
|
5-Minutes Neighbourhood
Deutschová, Martina ; Urbášková,, Hana (referee) ; Menšíková, Naděžda (advisor)
The subject of the diploma thesis is the architectural study of the mix-used urban housing situated closed to the Brno city centre. The design will allow mixing of greater amount of different functions on a relatively small built-up area, which will reduce the requirements on transport and provide the inhabitant with various forms of housing, services and employment. The mass and spatial solution respects the surrounding city blocks on south and the mass increase to the north industrial zone. The mass defines the area and respect noise protection zone on housing development. The shape of object's ground plan is based on the area, which is divided by four axes of pedestrian paths. The basic matter of object is divided into four blocks linked by common internal square. The mass solution provides private, semi-private and public courtyards.
|
guest ::
