|
|
Design of a pressure monitor for biomedical applications
Tenora, Jan ; Kolka, Zdeněk (referee) ; Biolková, Viera (advisor)
The goal of this bachelor’s thesis was to gather requirements for the realization and functional features of the proposed pressure monitor. Based on the collected requirements, the block diagram and also the complete schematic were proposed. Then the printed circuit board was designed, made and fitted. This board was placed into prepared box together with other components. Finished equipment was tested, set and also precision was checked by its measurement. Finally, user guide and also service manual were written.
|
|
|
Voltage reference based on LTZ1000 IC
Grohoľ, Stanislav ; Musil, Vladislav (referee) ; Hejátková, Edita (advisor)
The thesis deals with the issue of stability of voltage reference based on LTZ1000(A) integrated circuit. At the beginning are specified main parameters of voltage references in terms of stability. The work presents distribution references by architecture and by method of connection to the circuit. Work compares some references of Analog Devices and Linear Technology companies. In work is described voltage reference LTZ1000(A) and its circuits from datasheet. Listed are the main factor that influence the stability of reference, such as temperature, PCB design, Zener diode bias current, airflow and choice of circuit components. Given the description of a design module with the 7 V, 5 V and 10 V output. Made was three samples of PCB. Listed are results from long-term drift and temperature drift measures.
|
|
|
Controlled laboratory supply
Štibraný, Miroslav ; Petyovský, Petr (referee) ; Macho, Tomáš (advisor)
Master’s thesis deals with design of laboratory supply with precise voltage and current measuring. At the beginning it presents properties, advantages and disadvantages of linear and switching supplies, based on these facts it chooses a linear type of regulator. The design continues with detailed description of power and control analog and digital circuits. The thesis includes description of taking control over the supply from the front panel or through computer. The last part is devoted to measurement results and to presentation of some static and dynamic parameters of the designed supply.
|
|
|
Tutorial kits for course Powering electronic devices
Pochobradský, Jakub ; Švábeník, Petr (referee) ; Kubíček, Michal (advisor)
The goal of this bachelor thesis is to make a design of tutorial kits with a charge pump, DC/DC converter and a reference voltage and current sources that could be used in laboratory classes. In the first part basic principles of a charge pump and DC/DC converter are described. The second part is related to integrated circuits that are specific for construction of charge pumps and DC/DC convertors. The third part contains design of printed circuits.
|
|
|
Voltage References in Bipolar and CMOS Process
Kotrč, Václav ; Prokop, Roman (referee) ; Kadaňka, Petr (advisor)
This diploma thesis deals with precise design of Brokaw BandGap voltage reference comparing with MOS references. There is STEP BY STEP separation and analysis of proposed devices, using Monte Carlo analysis. There are also presented the methods for achieving a lower deviation of the output voltage for yielding device, which needs no trimming.
|
|
|
General-purpose power supply with microcontroller
Jorda, Ivo ; Vyskočil, Pavel (referee) ; Brančík, Lubomír (advisor)
The aim of this thesis is design of adjustable switched mode power supply with symmetrical output of 25 V, and switched mode power supply with fixed output voltage of 5 V. Required maximum output current of each outputs is 3 A. At the beginning of the paper function of the basic SMPS topologies is described. Next all reqiured SMPSs are designed and chosen parts of the design are simulated. In the second half of the thesis assembly and testing of PCB are described as well as functions of programs. Last chapter contains results of meassurement of power supply paramters.
|
|
|
Weight Measurement with Bathroom Scale Strain Gauges
Šenfluk, Petr ; Fuchs,, Michal (referee) ; Povalač, Aleš (advisor)
The aim of the thesis is weigh measurement using strain gauges from cheap digital scales. Work describes problems connected with using strain gauges as temperature compensation and requirements for accurate voltage reference and summarize function and wiring of chaep digital scales using four strain gauges. Result of work is design of an electrical circuit for weigh measurement using four strain gauges from analyzed scale.
|
|
|
Design of low noise Band Gap reference in BCD process
Kadaňka, Petr ; Prokop, Roman (referee) ; Kadaňka, Petr (advisor)
This diploma thesis focuses on noise analysis of different integrated circuits used for generating temperature stable reference voltage. All noise contributions are studied separately and there is shown a way of their minimization. Circuit using external capacitor with pre-charging system is chosen as the best solution. Output noise of all analyzed circuits is compared and characteristics of final band-gap reference are summarized at the end of the work.
|
|
|
Design of precise bandgap reference in ACMOS process
Kacafírek, Jiří ; Prokop, Roman (referee) ; Ing. Petr Kadaňka, ON Semiconductor v Rožnově p. Radhoštěm (advisor)
In this thesis the principle of voltage reference especially bangap reference is described. Below are described two circuits of this type designed in ACMOS process. There is handmade evaluation of error analysis to identify main error contributors and also monte-carlo simulation. Also statistical analysis is made on the circuit. Results of all methods are compared. Error of reference voltage is compared for both circuits. Circuit with bigger error is optimized to achieve a better precision. Obtained results showed a good agreement of all methods, which evidences importance of hand error evaluation.
|
|
|
Electrotherapy
Slavíček, Milan ; Rampl, Ivan (referee) ; Chmelař, Milan (advisor)
Aim those work is suggest simple generator for electropathy. In exordium deal with features weaving and fission current used in the electrotherapy. Draft part then includes proposal single part generator and calculations needed to achievement purposes. Result is then diagram simple generator for production Träbert flows and list parts.
|
guest ::
