|
|
The manufacuring hall in Louny
Jirásek, Marek ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
The aim of the bachelor thesis is design and assessment of the factory building in Louny. The hall has rectangular floor plan 68x30m. The supporting structure of the hall is designed as a steel frame with roof truss, purlins and braces for attachment of sheatling.
|
|
|
Family house with hairdressing salon
Smutný, Květoslav ; Mocová, Pavla (referee) ; Daněk, Lukáš (advisor)
This thesis deals with documentation to the family house with a hairdressing salon. It issupposed to beplaced on thelandwiththenumber 35/2 in thevillagecalledKaceřov near to Kynšperknad Ohří in Karlovy Vary area. Thisland occurs in sloping area so this fact influenced the proposal of this plan. It is building for four to five people. This building has two aboveground floors and a residential loft-room. In the first aboveground floor there is the hairdressing salon. This plan came from the disposition studies and from the building permit. The result of this work will be the full detailed documentation, which consists of the drawing of situation, a floor plan, views, foundation drawings, ceilings, trusses, stairs, and details. Then a technical report, extracts elements, a fire safety solutions, technical assessment of the thermal of the building.
|
|
|
Multipurpose Sport Hall
Rusoňová, Nikola ; Hron, Lukáš (referee) ; Buchta, Stanislav (advisor)
Subject of this thesis is to design and evaluate the multipurpose sports hall for a permanent,climate and traffic load. Light range of construction is 42,900 m, clear height at its highest point is 10,824 m. The construction is located in Brno. The main load-bearing elements of constructionare two-juncture arcs of constant cross-section of glued laminated timber class GL24h, axially remote 3,000 m. Trusses are transversely connected by purlins from solid wood for strengthclass C20 axially remote 1,100 m. The entire construction is braced by four transverse bracing,consisting of a rods system.
|
|
|
Structure of The Showroom
Trojanová, Lenka ; Röder, Václav (referee) ; Buchta, Stanislav (advisor)
This thesis describes the design of wooden substructures Motor Show. This constructionis located in South Moravia in Brno area. The dimensions are 33 mx 49 m and height from ground to top is 15.5 m The main structure is unbalanced arc of glued laminated timber, constant section height. Length of the arch is 39 meters. For the design of bearings, connections and contacts have been used steel elements. The concrete columns are stored using the arc tangent bearings. Front and side (east) side have a glass facade, glass is the antisun and security properties are opposite sides of the brickPOROTHERM 40th The structure was modeled in the SCIA ENGINEER 2011th The structural analysis was performed manually.
|
|
|
The steel roof structure of a sport hall
Frank, Ivo ; Barnat,, Jan (referee) ; Štrba, Michal (advisor)
The subject of this bachelor’s thesis is to design the steel roof structure of a sport hall in the area of city Jihlava. The plan dimensions of the structure are rectangural 45.200 x 40.300 m. The height of the structure is 15.150 m. The hall is designed by cylindrical roof. The main load bearing structure is created by arch lattice frame. The width of the frame is 40.300 m. The spacing of frames is 9.000 m. Frames are connected by lattice purlins‘. Purlins’are arranged radially. Longitudal rigidity of the structure is provided by transverse wind braces and upper beams of the purlins‘. Roof covering is made of roof panels laid directly on the purlins‘. The cladding is made of panels too. In the front of the structure is the cladding made by self-supported structure, which is not part of this thesis.
|
|
|
Family house with veterinary surgery
Flodrová, Helena ; Vlček, Libor (referee) ; Klimešová, Jarmila (advisor)
The Bachelor thesis with name „Family house with veterinary surgery“ is processed in the from of project documentation. The building is designed to fit to a fictional parcel 123/1 on the street Bakalářská in Brdkov. It is a single family detached house without a cellar and with double garage. The house is part of a gable roof roofted L-shaped roof and in part of roof roofted by vegetation roof. The family house is part roof two-storey hipped roof, the rest is single-storey. In the street part is a veterinary surgery.
|
|
|
FAMILY HOUSE WITH THE SURGERY GENERAL PRACTITIONER
Volf, Josef ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The theme of bachelor´s thesis is new-building family house with the surgery general practitioner. The residential area is divided for the two separate housing units. One of the apartments is duplex. The Surgery is wheelchair accessible. It has a separate entrance form the north side. The building is set in sloping terrain. It has three floors, it is partly basement and 3NP is solved in the attic. It is a brick building, which is the system POROTHERM with a combination of BTB fittings in the basement. Roofing is solved by a combination gabled and rack roof with a pitch 35° and 15°.
|
guest ::
