|
|
Bridge ower railway line
Prekop, Michal ; Russnák, Adam (referee) ; Panáček, Josef (advisor)
Diploma thesis is focused on a design of the road bridge of the category S7,5 in cadastral territory of a municipality Polanka nad Odrou. Three preliminary studies have been proposed. Box girder beam with a slant walls were selected for more detailed processing. Construction of the bridge is going to be build by time-dependent analysis on a solid formwork. The calculation of load is done by using computer software Midas Civil 19 v 2.1. and Scia Engineer 19.1. Selected preliminary was assessed according to the recent Europan standards.
|
|
|
Overpass bridge across the expressway
Beran, Jakub ; Zlatuška, Karel (referee) ; Nečas, Radim (advisor)
The topic of this thesis is detailed design of the supporting structure of a bridge. The final design is chosen out of three variants. It is a single beam structure consisting of 6 spans. The supporting structure is prestressed concrete with post-tensioning technology, the impact of phased construction is considered. the subject of the expertise of the structure is ultimate limit state, as well as service limit state, designed according to the code. The thesis also contains drawings, visualization and Engineering Report of the structure.
|
|
|
Highway box girder bridge
Ondrůšková, Kamila ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The subject of the diploma thesis is the bridging design of the valley and Doľanský potok on the D1 motorway in the section Jánovce - Jablonov in Slovakia. Three variants of bridging have been designed and then compared. A post-tensioned construction of the box girder cross section was chosen as the most suitable variant, which was further checked. The static calculation was drawn up according to European standards.
|
|
|
Highway viaduct
Zatloukal, Bohuslav ; Šopík,, Leonard (referee) ; Stráský, Jiří (advisor)
The subject of this thesis is the design and assessment of the bridge across the expressway and the deep valley in section Hričovské Podhradie - Lietavská Lúčka of highway D1 in Slovakia. The box girder structure with eleven spans was chosen of three variants. For each course there is a separate structure. The design of the bridge is carried out according to limit states including consideration of the impact of construction. The assessment of the construction is carried out using the beam model. The appendix contains structural analysis, drawings and visualization of the bridge.
|
|
|
Bridge formed by cell box girder across the expressway
Klein, Vojtěch ; Volák, Ondřej (referee) ; Nečas, Radim (advisor)
The aim of this thesis is to design a bridge over an expressway and a railway. There have been designed three alternatives. For detailed solving was chosen variant transferring directionally divided communication by two identical bridges, formed by a cell box girder. The thesis includes drawings, representation of the construction process, visualisations and a structural analysis. Designing and checks were carried out according to European standarts.
|
|
|
Flyover bridge over the Bečva river
Pidima, Jan ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The thesis deals with a design of a highway bridge with multiple spans. The bridge is constructed for highway D1 and goes across the river Bečva close to the city Přerov. Two different solutions were carried out from which a solution with subsequently prestressed box girder was chosen. Static model and load actions were modelled in program Scia Engineer 2016.0. Design checks were done manually according to corresponding Eurocodes. Load actions from wind, uneven support settling and horizontal actions from transit were neglecte.
|
|
|
Bridge formed by cell box girder
Zifčák, Karel ; Brtáň, Stanislav (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design and assessment of the bridge construction across the deep valley on highway traffic. From three variants, which were compared to each other, was the most suitable further examined. The solved structure is made of post-tensioned concrete, and is formed with cell box girder with transverse overhangs, which are supported by prefabricated struts over the length of the bridge. The load was considered by the European Standard EN 1991-2 - Traffic loads on bridges and dimensioning according to EN 1992-2-Design of concrete structures - Concrete bridges - Design and detailing rules.
|
|
| |
|
|
Static analysis of residential building
Hanzlík, Petr ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The discussion of the master’s thesis is static analysis of residental building. The thesis details the original solution from assesment and a new design variant solution. The work is focused on static solution of monolithic concrete plate with ribs and is devoted to limit states assessment of the plate with ribs. The thesis includes a time analysis structure and prestressed ribs in the new variant.
|
|
| |
guest ::
