|
|
New apartment building in Telč
Benešová, Zuzana ; Hobzová, Klára (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor's thesis is to design and develop project documentation for a new apartment building. The apartment house is located in Telč. The building is designed as a free-standing building with three aboveground floors and one basement. There are eleven parking spaces next to the building. The basement of the floor plan extends above the ground floor, there is a common room, cellar and technical facilities. There are nine residential units on the upper floors. The apartment building is based on reinforced concrete foundation strips. Perimeter masonry in the basement is made of concrete blocks and in the upper floors of ceramic blocks. The internal load-bearing masonry is also made of ceramic blocks. The ceiling structure and the staircase are monolithic. An elevator is located between the arms of the staircase. The roof is flat, vegetative. The building envelope is insulated with the ETICS contact thermal insulation system.
|
|
|
Apartment house in Šlapanice
Špinar, Adam ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The subject of the Bachelor‘s thesis was to create a project documentation for the construction of the new residential building in Šlapanice with almost zero energy consumption. Object is designed as three-storey house non-basement. The new building is situated on a corner of two streets and is connected to the buildings from the southeast side. On the first floor there are three establishments, technical rooms and garage parking. On the second floor there are four residential units with a terrace. The third floor has three residential units with a balcony. The foundation structure consists of reinforced concrete belts on drilled piles. The construction system is longitudinal, made of large-format lime-sand blocks for machine bricklaying. Ceiling structures are designed as monolithic reinforced concrete. The roof structure is made of prefabricated wooden trusses. Deep foundation is used to obtain thermal energy from the subsoil using a ground-to-water heat pump. The piles are designed to be energy efficient.
|
|
|
Apartment building R7
Svitálková, Tereza ; Kučírek, Pavel (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor's thesis was to design and after that to develop a project documentation for a new apartment building R7. The apartment house is located on a plot in Praha – Karlín, Rohasnké nábřeží. The building is designed as a free-standing building with three aboveground floors and one basement. The floor plan of the basement reminds rectangle. There are cellars, garage, and technical facilities in the basemant. On the upper floors there are fifteen aparment units, five units on each upper floor. All apartments on ground floor have its own terrace; apartments on the sedond and the third floor have balconies. The apartment building is based on reinforced concrete foundation slab. The structural system of the basement is also made of reinforced conctrete and is consisted of colomns, beams and walls. The whole envelope of the underground is made from underground waterproofing system – a white tank. The external and internal load-bearing masonry of the upper floors is made of ceramic blocks. The ceiling structure with the balconies is made of reinforced concrete floor slab. The staircase is prefabricated. An elevator is located next to the arms of the staircase. The roof of the aparment building R7 is flat and partly walkable. The exterior building´s envelope is insulated with the ETICS contact thermal insulation system.
|
|
|
Children's Home
Chrbolková, Erika ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The thesis focuces on project documentation for a construction project with the aim to design home for children under institutional care. Located on the outskirts of Skuteč, the building is three-storey, detached and partially basemented. The basement area lays on the slab foundations and the first floor on strip foundations. Vertical structures are made of ceramic blocks and local reinforced concrete columns while horizontal structures are made of reinforced concrete slabs and wooden trusses over the gym. The building is covered by a vegetated flat roof. The building houses six residential units for six family groups with a total capacity of 43 children. The basement includes gym and fitness with technical facilities. The first floor consists of three residential units, changing rooms for the gym and kitchen with facilities. The second floor houses remaining three residential units, offices and the refectory. The upper floor is used for children´s education and entertainment.
|
|
|
Environmentally advanced retirement home
Voves, Martin ; Rubinová, Olga (referee) ; Horák, Petr (advisor)
The subject of my master's thesis is the design of an energy-efficient house for the elderly. The building has three floors. The construction system is made of ceramic blocks filled with glass wool. The building is covered with a flat vegetation roof. The retirement home has 15 apartments, a doctor's office, a common dining area, a common room and offices for administration. A technical concept for the building environment was designed for the building. The dining room, office, lounge and doctor's rooms are forcibly ventilated. The premises are divided into three zones and each zone has its own air handling unit. Heating is provided by two condensing gas boilers and the whole building is heated by radiators. An assessment was made for the design of photovoltaic panels. In the third part, an assessment and research of sources for heating and hot water was prepared.
|
|
|
Apartment building
Jakubec, Marek ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The task of this bachelor's thesis was to process the project documentation for the construction of an apartment building in the city of Brno. The apartment house is a free-standing, with three storeys and no basement. The building is covered with a flat roof. On the 1st floor there are 3 garage spaces, cellars and technical facilities of the building. There are a total of 4 housing units on the 2nd and 3rd floors. On the second and third floors, the structures recede and create terraces in two apartments. The other two apartments have their own balconies. Perimeter masonry is made of ceramic blocks with insulation. The ceiling structure is made of reinforced concrete. The bachelor thesis also contains an assessment of the building in terms of building physics and fire safety.
|
|
|
Civil building
Chytilová, Pavlína ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
This thesis deals with the design of a primary school for the 1st degree in Kromeriz. This is a set of 3 buildings. Object A is partially cellared, with 2nd floor above ground floor. In this building there is a boiler room with air conditioning, changing rooms, offices for school management and a dining room. Building B is an unsym basement 3rd floor building, which serves for the stay of pupils of the 1st-5th grade of the elementary school. Object C is unsymed, single-storey. It is a gym, changing rooms and sanitary facilities. This thesis solves object B, which is used for the stay of pupils of the 1st-5th grade of the primary school. The building is of irregular rectangular shape and is designed as a three-storey, unsymed. The structure consists of a skeleac structure. Linings of perimeter masonry made of ceramic blocks POROTHERM 30 Profi, based on concrete feet. The inner supporting masonry is made up of porotherm 25 AKU blocks. The inner non-supporting masonry is designed from POROTHERM 14 Profi blocks and POROTHERM 8 blocks. The insulation of the building is designed as a certified contact system. The horizontal supporting structure of the ceiling is solved by a cross reinforced ŽB plate. The staircases are ŽB monolithic. Roof structures are made up of flat roofs.
|
|
|
Apartment building
Kolářová, Kristýna ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
This bachelor's thesis deals with project documentation for the construction of an apartment building in Olomouc, known as VILA PARK OLOMOUC. The designed apartment building has three floors, a basement with seven residential units and underground public parking. The vertical load-bearing structures are designed as reinforced concrete or Porotherm ceramic blocks. Non-load-bearing vertical structures as well as Porotherm ceramic blocks. The perimeter masonry is contact insulated. Horizontal structures are formed by monolithic reinforced concrete slabs. The roof of the building consists of a flat roof. The underground structure is formed as a white tank. Each apartment is well lit by large plastic windows. Each apartment has a terrace or loggia, which is lined with wood and creates a unique look of the apartment building. The building is designed with regard to the current and future surrounding buildings. Part of the bachelor's thesis is also a basic assessment in terms of building physics and fire safety solutions.
|
|
|
Energy passive guesthouse
Štukavec, Václav ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The subject of my diploma thesis is the elaboration of an architectural study and project documentation for the construction of a detached house building. The new building is located on the outskirts of slavkov, in the district of Opava. It is a three-storey non-cellar building with vertical structures in the Porotherm system, monolithic reinforced concrete ceilings and a single-skin flat roof, vegetation. Ten apartments and four separate rooms are designed in the building and wellness is designed in the first floor.
|
|
|
Apartment building
Slezáková, Tereza ; Kvapilová, Vendula (referee) ; Jelínek, Petr (advisor)
This bachelor thesis depicts project documentation for realization of an apartmen house in Hradec Králové. The designed object includes nine flats in three storeys with technical facilities and no cellar. Vertical load-bearing and curtain walls are designed to be built of Porotherm ceramic blocks. The outside wall is insulated with expanded facade polystyrene and plastered with a thin-layer textured agate and cream plaster. The openings are filled with plastic windows including a plastic entrace door with a fanlight. Horizontal constructions are made od moholithic reinforced concete panels which are reinforced in one or two dimensions. The roofing in designed as a flat roof with a layer of vegetation. The foundations of the block of flats are based on concrete strips. The design of the object respect current housing in the area. The bachelor thesis includes a basic review of construction physics and fire safety layout.
|
guest ::
