|
|
PMD - polarization mode dispersion and its effects on data transport
Trávníček, Pavel ; Dostál, Otto (referee) ; Filka, Miloslav (advisor)
My graduation thesis is concerned with the effect of polarization mode dispersion on transmitted signal by optical line. It describes external and internal causes of origination of polarization mode dispersion. On the basis of these effects there is a differential group delay (DGD). It is the time delay in meantime within individual modes. DGD results in a time extension of impulsion and limitation of maximum bit rate. This thesis contains localization methods of part of gossamer filament with increased value of PMD by POTDR method. This method is based on the principium of back dispersion and its modifications SOP a DOP. Very important chapter of this thesis is the measurement of the polarization mode dispersion. There are described methods of PMD measurement. It is the interferometric and polarimetric method and the method of state of polarization. The major part of this thesis is about the reduction of polarization mode dispersion effect. This part is divided into two parts. First part is about the methods of PMD effect reduction and the second one is about the PMD compensation. The discrepancy between these two parts is the reduction way of PMD effect on transmitted channel. The compensation use the compensation components inserted into the transmission path. By PMD reduction methods we can solve the problems from the view of changing of fibre or all cable. For better understanding of polarization mode dispersion effect there are simulated 4 optical lanes of various parameters. The simulation output is the eye diagram which provides the view at results of transmission lane. In the final part there is the evaluation of measured parameters of optical lanes simulated in a laboratory.
|
|
|
Effects of mechanical doings on optical data transport
Tihlařík, Tomáš ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
This master´s thesis deals with of human factor impact on optical fibers manipulation. It describes types and methods used for splicing and placing optical fibers and optical cables. These methods are specified in the chapters; their application in different environments and conditions is accentuated. This paper presents splicing optical fibers. It emphasizes problems which can occur if proper procedures aren´t kept or if improper device is used. In the thesis there is the chapter dealing with problems which can arise during splicing optical fibers - these negative influences are evaluated with educational equipments EF-970-01 PLASTIC by the company MIKROKOM, s.r.o. Another aim of the work is to describe mechanical optical fiber splice 3MTM FibrlokTM. This kind of device was lent for testing optical fibers multiple splicing. It was tested under extreme conditions. Statistically processed values of insertion loss and splice reflectance, measured by OTDR are the results of the test. Comparing measured values, technical report ones, regarding for usage in practice, there is a possibility of 75 multiple reusing of the mechanical optical fiber splice. The prediction of magnitude insertion loss, calculated for thousands splice cycles follows. The next part of the work deals with fusion splices and contains comparison of splices made with two cleavers: CORNING LWL-TRENNGERAT S46999-M9-D12 and the later model - Fitel S325A cleaver. The result is that older S46999-M9-D12 model gained lower attenuation. The results of both previous measurements are influenced by human factor. It appears at mechanical optical fiber splices as growing fluctuate of insertion losses and as the unequal attenuation fusion splices at tested cleavers.
|
|
|
Laser transmitter with fiber
Hašek, Jaroslav ; Němeček, Jiří (referee) ; Wilfert, Otakar (advisor)
This master´s thesis deals with communication which is provided by optical devices. Optical wireless links are enforced due to high bit rate, responsibility and noise immunity. Main part of this master´s project is devoted to optical fibre, its characteristic and its usage in laser transmitter.
|
|
|
Effect of optical connectors quality on transmission
Bernkopf, Miroslav ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
This diploma thesis deals with optic fiber connectors and their influence on transmissions realized via fiber optics. Optical fibers and lightguides play the key role in telecommunications because of constant demands of higher bandwidth and data rates. Original metalic wires do not meet market requirements and so the fiber optics are more and more being used. There are various types of fibers and there are also many ways of connections. This work deals with demountable way of connection – optical connectors, which have the biggest influence on a total attenuation and route length. Connector has to meet various requirements such as cleannes, quality, mechanical construction and ferrule polishing.
|
|
|
SNOM probes with special properties
Slabý, Vít ; Kalousek, Radek (referee) ; Spousta, Jiří (advisor)
This bachelor thesis deals with scanning near-field optical microscopy. With SNOM we examined experimentally the near field of the interference of surface plasmon polaritons (PPP) on plasmonic structures consisting of slits in a metal layer a we discuss the effect of probe characteristics on the measurement results.Effect of few characteristics is simulated numerically. Findings obtained in the previous experiments are used for the construction designing of an experimental device called NanoGIS, which should serve for the nanostructure manufacturing.
|
|
| |
guest ::
