|
Block of flats in Třebíč
Carda, Vojtěch ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The content of this thesis is to design four storey block of flats. The house is supposed to be passive. The building is four storey basement, roofed hipped roof, with flat roof operation served as a terrace. The building is located on a plot of number 1037/28 in the village Trebic, cadastral area Trebic. Supporting structures of the house are made of monolithic reinforced concrete frame with masonry infill of clay brick blocks THERM. The building is insulated contact insulation system EPS boards. The roofing is done using a timber truss. The house is based on the base plate. The project includes a seminar work assessing thermal technical and acoustic properties of structures.
|
|
Multi-functional building
Juříček, Marek ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The subject of this diploma thesis is a design documentation of multi-functional building. The building has a basement and four above-ground floors. The basement is served as an APS garage. The ground floor contains commercial premises as a bistro, copy centre and hairdresser's. The first floor is used for offices. The third and the fourth floors contain two maisonette with roof decks. Structural system is masonry systém of lightweight concrete block Ytong and RC’s elements. A roof is design as warm flat roof with waterproof membrane of m-PVC foil. Dominant elements are a ventilated cladding Cembrit and glass facade oriented on south-east.
|
|
The mixed-use building near meanders of the Lučina river
Bulawová, Šárka ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
Subject of this final thesis is to develop project documents of a new mixed-use building in Havířov. The building has three floors and basement car park. On the first floor there is a café and shops. On the second and third floor there are office spaces. Structural sytem of building is cast-in-place concrete frame. Exterior building envelope is made of sand-lime bricks with ventilated facade with thermal insulation of mineral wool insulation. The roof of the building is designed as a non-walkable warm flat roof.
|
|
New Building of Sports Centre
Bratršovský, Ondřej ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of my master´s thesis is the proces of structurylly-technical part of the project documentation of a new building of sports centre in Polná. Designed building is located in the western part of the field by gently sloping terrain. The building is divided into two patrs of the building. Sports hall and facilities for athletes and spectators. The sports hall has one floor and is partially below the surface. The sports hall is covered with a gable roof. Roof cladding is made of sandwich panels. Facilities has two floors and is covered by a flat roof. This is a new building, which are used in conventional building materials. The main fittings include brick and reinforced concrete.
|
|
VILARO Family Winery, Velké Bílovice
Zálešák, Roman ; Semrád, Antonín (referee) ; Štěpánek, Ladislav (advisor)
This thesis describes the design of a project Family Winery VILARO in Velké Bílovice. It consists of two objects. The first is a guesthouse with a restaurant and the second is a production building with a tasting room. The guesthouse is submitted in the stage of building design. Production facility, a winery, is discussed further as the implementation project. The winery is located in a slightly sloped terrain. It has one partially cellared ground floor. The roof is atypical, one part is sloped triple-coated shed roof, second part is flat with stabilizing layer. The support systém mainly consists of brick blocks, ferroconcrete walls, ferroconcrete boards, ferroconcrete beam ceiling and prestressed concrete ceiling panels Spiroll. The project assumes using of typical building materials.
|
|
Fitness Odry
Uherek, Jakub ; Gábrová, Lenka (referee) ; Čupr, Karel (advisor)
The topic of this thesis is the processing documentation of a fitness center with another establishment of wellness and coffehouse. Building is situated on a sloping terrain in Odry. It's a public services. The building has two above-ground floors and one basement. The loadbearing structure is of cast-in-place concrete frame. The building is insulated by contact insulating system ETICS. Roofing is of flat roof. On the land is designed park with 15 spaces directly accessible from the driveway.
|
|
Restaurant with Microbrewery in Golčův Jeníkov
Wernerová, Lucie ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
The project involves the design and solution of restaurant with microbrewery and accommodations. This is a new building on the land plot no. 2739, which is located in Golčův Jeníkov and situated in the middle of plat. Entrance to object and disposition inside the building is has barrier-free solution. Restaurant with microbrewery is designed for a capacity of 120 people in restaurant and 30 places to sit in lounge bar. Total capacity of boarding house is 21 beds. One double room is designed has barrier-free solution. Structural system of restaurant with microbrewery is combined, which is formed in one part of precast concrete frame S 1.2 and in other part of wall structural system. They are designed reinforced concrete columns about dimensions 0,4x0,4 m with axial distance 6x8 m. Masonry part of the building and infill wall in above-ground floors is lined with ceramic blocks of the type therm. Infill wall in the basement is formed of permanent formwork. The building is insulated a contact thermal insulation with an insulation of thickness 130 mm. Internal loadbearing and non-load-bearing wall in basement and in first floor are lined with ceramic blocks type therm and in second floor they are designed plasterboard partitions. The building is covered with a warm flat roof. Loadbearing structure of roof and ceilings structure are formed prestressed concrete floor slabs SPIROLL. Floor assembly is burdened with river stones of thickness 120 mm.
|
|
Mountain Hotel
Hrachovec, Matěj ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
The thesis focuses on a project of a mountain hotel. Hotel is located in the area Jeseník, altitude of 550 m. It is detached hotel with a rectangular ground plan with one underground floor and four above ground floors. In the basement is the engine room ventilation, bikes room and in the second part of the underground is wellness center. On the first floor is a restaurant. In the other floors are hotel rooms for 1 to 3 person. On the fourth floor are two apartments. The hotel is based on the monolithic footings.In the basement the vertical supporting are from concrete. Other vertical supporting are built from bricks Porotherm 30, which is insulated and ventilated facade with laggin 150 mm. Supporting horizontal structures are made of monolithic reinforced concrete. The building is covered with a double skin roof structure made of wooden trusses.
|
|
Guesthouse
Vlčková, Bára ; Kučera, Radim (referee) ; Pěnčík, Jan (advisor)
This bachelor thesis is a project of new five-storey, semi basement guesthouse in Opava. This guesthouse will be used for accommodation, catering and recreation. Accommodation capacity is 21 people. In the basement is a technical background. The first floor is designed for the overall run of the guesthouse, staff, catering and sports. In the second and third floor are rooms for guests. Almost every room has a balcony. In the fourth floor is a common room with adjoining terrace. The building is brick. The vertical structures are made of ceramic blocks. Outer walls are insulated by outer contact system. The ceilings are mostly ceramic-concrete and a smaller part of the reinforced concrete. The guesthouse is roofed by single-flat roof.
|
|
The flat - building with office space
Ellner, Miroslav ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of diploma work is the design of residential building with office space in Uničov. This is a five-story building with one underground floor and four storeys. The building is divided into two almost identical parts interconnected communication space. Bearing structures in the underground parts are made of reinforced concrete monolithic walls. The above-ground part is used a brick wall system KM Beta SENDWIX. For communication space is used columned longitudinal system. The building is covered double-walled surface roof.
|