|
Packet Classification Algorithms
Puš, Viktor ; Lhotka,, Ladislav (referee) ; Dvořák, Václav (advisor)
Tato práce se zabývá klasifikací paketů v počítačových sítích. Klasifikace paketů je klíčovou úlohou mnoha síťových zařízení, především paketových filtrů - firewallů. Práce se tedy týká oblasti počítačové bezpečnosti. Práce je zaměřena na vysokorychlostní sítě s přenosovou rychlostí 100 Gb/s a více. V těchto případech nelze použít pro klasifikaci obecné procesory, které svým výkonem zdaleka nevyhovují požadavkům na rychlost. Proto se využívají specializované technické prostředky, především obvody ASIC a FPGA. Neméně důležitý je také samotný algoritmus klasifikace. Existuje mnoho algoritmů klasifikace paketů předpokládajících hardwarovou implementaci, přesto však tyto přístupy nejsou připraveny pro velmi rychlé sítě. Dizertační práce se proto zabývá návrhem nových algoritmů klasifikace paketů se zaměřením na vysokorychlostní implementaci ve specializovaném hardware. Je navržen algoritmus, který dělí problém klasifikace na jednodušší podproblémy. Prvním krokem je operace vyhledání nejdelšího shodného prefixu, používaná také při směrování paketů v IP sítích. Tato práce předpokládá využití některého existujícího přístupu, neboť již byly prezentovány algoritmy s dostatečnou rychlostí. Následujícím krokem je mapování nalezených prefixů na číslo pravidla. V této části práce přináší vylepšení využitím na míru vytvořené hashovací funkce. Díky použití hashovací funkce lze mapování provést v konstantním čase a využít při tom pouze jednu paměť s úzkým datovým rozhraním. Rychlost tohoto algoritmu lze určit analyticky a nezávisí na počtu pravidel ani na charakteru síťového provozu. S využitím dostupných součástek lze dosáhnout propustnosti 266 milionů paketů za sekundu. Následující tři algoritmy uvedené v této práci snižují paměťové nároky prvního algoritmu, aniž by ovlivňovaly rychlost. Druhý algoritmus snižuje velikost paměti o 11 % až 96 % v závislosti na sadě pravidel. Nevýhodu nízké stability odstraňuje třetí algoritmus, který v porovnání s prvním zmenšuje paměťové nároky o 31 % až 84 %. Čtvrtý algoritmus kombinuje třetí algoritmus se starším přístupem a díky využití několika technik zmenšuje paměťové nároky o 73 % až 99 %.
|
|
Acceleration of Object Detection Using Classifiers
Juránek, Roman ; Kälviäinen, Heikki (referee) ; Sojka, Eduard (referee) ; Zemčík, Pavel (advisor)
Detekce objektů v počítačovém vidění je složítá úloha. Velmi populární a rozšířená metoda pro detekci je využití statistických klasifikátorů a skenovacích oken. Pro učení kalsifikátorů se často používá algoritmus AdaBoost (nebo jeho modifikace), protože dosahuje vysoké úspěšnosti detekce, nízkého počtu chybných detekcí a je vhodný pro detekci v reálném čase. Implementaci detekce objektů je možné provést různými způsoby a lze využít vlastnosti konkrétní architektury, pro urychlení detekce. Pro akceleraci je možné využít grafické procesory, vícejádrové architektury, SIMD instrukce, nebo programovatelný hardware. Tato práce představuje metodu optimalizace, která vylepšuje výkon detekce objektů s ohledem na cenovou funkci zadanou uživatelem. Metoda rozděluje předem natrénovaný klasifikátor do několika různých implementací, tak aby celková cena klasifikace byla minimalizována. Metoda je verifikována na základním experimentu, kdy je klasifikátor rozdělen do předzpracovací jednotku v FPGA a do jednotky ve standardním PC.
|
|
STATISTICAL LANGUAGE MODELS BASED ON NEURAL NETWORKS
Mikolov, Tomáš ; Zweig, Geoffrey (referee) ; Hajič,, Jan (referee) ; Černocký, Jan (advisor)
Statistické jazykové modely jsou důležitou součástí mnoha úspěšných aplikací, mezi něž patří například automatické rozpoznávání řeči a strojový překlad (příkladem je známá aplikace Google Translate). Tradiční techniky pro odhad těchto modelů jsou založeny na tzv. N-gramech. Navzdory známým nedostatkům těchto technik a obrovskému úsilí výzkumných skupin napříč mnoha oblastmi (rozpoznávání řeči, automatický překlad, neuroscience, umělá inteligence, zpracování přirozeného jazyka, komprese dat, psychologie atd.), N-gramy v podstatě zůstaly nejúspěšnější technikou. Cílem této práce je prezentace několika architektur jazykových modelůzaložených na neuronových sítích. Ačkoliv jsou tyto modely výpočetně náročnější než N-gramové modely, s technikami vyvinutými v této práci je možné jejich efektivní použití v reálných aplikacích. Dosažené snížení počtu chyb při rozpoznávání řeči oproti nejlepším N-gramovým modelům dosahuje 20%. Model založený na rekurentní neurovové síti dosahuje nejlepších publikovaných výsledků na velmi známé datové sadě (Penn Treebank).
|
|
Image analysis in tribodiagnostics
Machalík, Stanislav ; Stodola,, Jiří (referee) ; Tillová,, Eva (referee) ; Zemčík, Pavel (advisor)
Image analysis of wear particles is a suitable support tool for detail analysis of engine, gear, hydraulic and industrial oils. It allows to obtain information not only of basic parameters of abrasion particles but also data that would be very difficult to obtain using classical ways of evaluation. Based on the analysis of morphological or image characteristics of particles, the progress of wearing the machine parts out can be followed and, as a result, possible breakdown of the engine can be prevented or the optimum period for changing the oil can be determined. The aim of this paper is to explore the possibilities of using the image analysis combined with the method of analytical ferrography and suggest a tool for automated particle classification. Current methods of wear particle analysis are derived from the evaluation that does not offer an exact idea of processes that take place between the friction surfaces in the engine system. The work is based upon the method of analytical ferrography which allows to evaluate the state of the machine. The benefit of use of classifiers defined in this wirk is the possibility of automated evaluation of analytical ferrography outputs; the use of them eliminates the crucial disadvantage of ferrographical analysis which is its dependence on the subjective evaluation done by the expert who performs the analysis. Classifiers are defined as a result of using the methods of machine learning. Based on an extensive database of particles that was created in the first part of the work, the classifiers were trained as a result, they make the evaluation of ferrographically separated abrasion particles from oils taken from lubricated systems possible. In the next stage, experiments were carried out and optimum classifier settings were determined based on the results of the experiments.
|
|
Network Architecture and Interconnection of Embedded Systems
Trchalík, Roman ; Drábek, Vladimír (referee) ; Srovnal, Vilém (referee) ; Švéda, Miroslav (advisor)
The thesis focuses on the architecture of embedded systems. It summarizes the current state of accepted standards from IEEE 1451 family, which deals with creating an environment for the sensors and their involvement in various networks. These standards describe the open, network-independent communication architecture for a sensor-based system. One of the main outcomes of this work is the architectures presented as case studies, which can be used as design patters for embedded applications. They are demonstrated on ZigBee technology suitable mainly for small devices with very low power consumption. Based on these studies the new design of universal gateway was proposed. Its major advantage is that it allows interconnection of the endpoints based on different sensor network technologies. Additionally, the thesis deals with modifying the routing protocol of ZigBee network in order to reduce power consumption required to transmit one data packet.
|
|
Optimization of network flow monitoring
Žádník, Martin ; Lhotka,, Ladislav (referee) ; Matoušek, Radomil (referee) ; Sekanina, Lukáš (advisor)
The thesis deals with optimization of network flow monitoring. Flow-based network traffic processing, that is, processing packets based on some state information associated to the flows which the packets belong to, is a key enabler for a variety of network services and applications. The number of simultaneous flows increases with the growing number of new services and applications. It has become a challenge to keep a state per each flow in a network device processing high speed traffic. A flow table, a structure with flow states, must be stored in a memory hierarchy. The memory closest to the processing is known as a flow cache. Flow cache management plays an important role in terms of its effective utilization, which affects the performance of the whole system. This thesis focuses on an automated design of cache replacement policy optimized to a deployment on particular networks. A genetic algorithm is proposed to automate this process. The genetic algorithm generates and evaluates evolved replacement policies by a simulation on obtained traffic traces. The proposed algorithm is evaluated by designing replacement policies for two variations of the cache management problem. The first variation is an evolution of the replacement policy with an overall low number of state evictions from the flow cache. The second variation represents an evolution of the replacement policy with a low number of evictions belonging to large flows only. Optimized replacement policies for both variations are found while experimenting with various encoding of the replacement policy and genetic operators. The newly evolved replacement policies achieve better results than other tested policies. The evolved replacement policy lowers the overall amount of evictions by ten percent in comparison with the best compared policy. The evolved replacement policy focusing on large flows lowers the amount of their evictions two times. Moreover, no eviction occurs for most of the large flows (over 90%). The evolved replacement policy offers better resilience against flooding the flow cache with large amount of short flows which are typical side effects of scanning or distributed denial of service activities. An extension of the replacement policy is also proposed. The extension complements the replacement policy with an additional information extracted from packet headers. The results show further decrease in the number of evictions when the extension is used.
|
|
Effective using of potential of bilingual environment
HOVORKOVÁ, Eva
The dissertation thesis "How to use the potential of bilingual environment efficiently" endeavors to highlight bad as well as good practices in bilingual upbringing. Bilingualism represents at present a very topical issue. In connection with increasing globalization, the issue of learning of foreign languages is more and more emphasised. People living in mixed marriages have often no idea how to bring their children up. In many cases they take steps that lead to irreversible consequences. The theoretical part of the thesis gives a survey of bilingualism, the division and kinds of bilingualism and ways of its acquisiton. The theory is practically illustrated in the empirical part through various examples. 42 case studies have been carried out, which include characteristic and uncharacteristic respondents. The findings of the research are compared with the facts mentioned in the reference works. The aim of the dissertation thesis is to find out which educational methods should parents follow in bilingual education and which methods they should better avoid.
|
|
Adolescent overweight and obesity
JINDROVÁ, Kateřina
My bachelor´s thesis deal with obesity of adolescents and problems with overweight. These problems are described in details, and after that divided into specific parts. The main goal of my bachelor´s thesis is to chart problems with obesity and overweight in age group from 15 to 18 (adolescents) and primary describe their eating habits and physical activity. Theoretical part is focused on occurrence of overweight and obesity in the Czech Republic and in the world, causes of its origin, risk factors, classification and diagnosis, types, therapy and prevention. This bachelor´s work dealing with rational diet, describing basic principles of healthy catering and explaining right or wrong foodstuffs. I point mainly on prevention of overweight and obesity by healthy eating and physical activity. Methodical part is processed thanks to quantitative research. Data were gained by questionnaires, which were given to high school students (1st - 3rd grade). The research group contains 150 respondents from different schools in České Budějovice and close neighborhood. Final results are written down primary in graphs with commentary and data charts. In case of right use of qualitative research, there were determined two hypotheses. First hypothesis: Overweight and obesity is more occurred at adolescents with wrong eating habits. Second hypothesis: Overweight and obesity is more occurred at adolescents with low physical activity. For developing exploratory part, there was used quantitative research, which was provided by questionnaires given to students of age from 15 to 18. Entire data were processed by the use of program Microsoft Excel, and its calculations and functions. The answers of respondents were registered into database, and, by using specific excel functions, I was able to report data in determined categories. The research was mainly concentrated on physical activity and eating habits. Final results are put into well-arranged graphs, which are always enriched by comments, eventually completed by data tables, and, subsequently, statistically evaluated. In results, there might be seen two main differences between adolescents with standard weight and adolescents with overweight or obesity problems. One of those is irregularity in eating and wrong eating habits; big difference is also proved in physical activity. Adolescents with obesity or overweight have often irregular food intake, they drink a lot of high caloric beverages such as Coca-Cola, Sprite, Fanta etc., deficient income of fruit, vegetables, legumes, fish, or low physical activity. Only few of obese adolescents is different, because their problem is caused genetically. Adolescents with standard weight eat more regularly, but there are also some special cases, who have similarly wrong eating habits as obese people; however, all of these adolescents have one typical quality regular physical activity. Both hypotheses are confirmed. The results show that obesity is mainly caused by genetic predispositions, but these factors can be positively affected by periodic physical activity or appropriate eating habits. At the end of the thesis, it should be mentioned that it is necessary to be focused on right eating habits and regular physical from the very young age, when the basic customs and habits are assumed. That should include parents' action around their children, as they are usually the first example and they have the biggest influence.It is important to develop knowledge about all kinds of prevention, which are in most cases major in defending against formation of overweight and obesity.
|
|
Application of Queueing Theory
VÁŇOVÁ, Eliška
The goal of this thesis was to understand Queueing Theory and use it for analysis of queueing system of hypermarket company PZV. Theoretical part is consists of basic iformations which is necessary to know for application of queueing theory. First chapter is about random variables, random event, random proces, stochastic and Poisson processes and Markov chains. Then was possible to describe queueing theory basic characteristics, parameters, analy-sis, classification and basic models. In the practical part was from the beginning analyze development of custo-mers going through cashier zone. On the base of analysis were customers divided into 4 groups. For these groups were counted characteristics and parameters, next was analyzed the system, but because data were too inaccurate, it was necessary to use different values for the groups and to count analysis for these values. The last step was to find number of cashiers to make system optimal. The result, it was 4 ca-shiers, was unfortunately not accurate. For better results it would be necessary to have more detail data.
|
|
Project management in selected company
POKORNÝ, Radek
This work deals with project management in chosen company. It has two parts. The first part is theoretical, which is focused to theoretical treatment of the subject. It explains what is the project, management of projects, organizations of projects, processes of project management, what is target of project, communication, control, changes and risks and more. In the practical part I focused to concrete company and project management and than I analyzed concrete project. Name of the mentioned company is OHL ŽS, a.s. It is company from Spain, which acts all over the world. In the Czech Republic has the base in Brno. This company has several divisions and every of them is focused to different professional architecture. I have chosen division of structural engineering. This division builds all kinds of buildings. It could be construction of new buildings or reconstruction. To analysis of chosen project I used various business documents, contracts with investor or suppliers, document which include billing, timetable. I especially used my experience with projects of this company, and I was part of this project. Name of this project is Reconstruction of cladding including replacement windows and insulation. During the analysis of project I found a couple major gaps. If we could avoid these gaps, we could increase profit. These graphs is especially in management. At the beginning there were appointed two temporary construction managers. They doesn't care about result project, because they knew that they will not be to the end of the project. These gaps are because there is missing motivation system. Project manager can´t affect results of employees. It doesn´t depend on performance of employees, they always has the same wages. For elimination of these gaps I proposed several suggestions for improvement. The first suggestion is modification and extension of motivation system. New motivation system include personal evaluation. This evaluation depends on performance of employee. The second part is bonus from over profit. The next suggestion is make a new working position. This position would take care about controlling and project documentation. During the building project, especially at the end is construction manager very busy. It depend of decision of construction 63 manager what kind of activity will have prefer. Project documentation and administration or controlling of building works. If they are doing everything correct and technology are respect. Suggested position would take care about invoices, real work, which is done, project documentation, controlling of budget. The third suggestion is purchase of small machinery such as chipping hammers and drills. At this time they rent all devices. Rent is higher than purchase price. The last suggestion is use credit to restoration of fleet. At this time they have obsolete fleet, because the bought all cars by cash. It is not conveniently.
|
guest ::
