|
Micro-electromembrane extraction across multiple aqueous and organic phases for selective pretreatment of raw biological samples
Kubáň, Pavel ; Boček, Petr ; Seip, K. F. ; Gjelstad, A. ; Pedersen-Bjergaard, S.
Micro-electromembrane extraction (μ-EME) across multiple aqueous and organic\nsolutions was developed for selective extractions of various analytes from untreated\nbiological samples. The novel approach requires μL volumes of samples and organic\nsolvents, which form consecutive immiscible plugs in a transparent polymeric capillary\nand the extraction process is accelerated by application of d.c. voltage. Number of the\nplugs, their composition, volume and sequence in the extraction capillary can be chosen\nspecifically for each particular application and high variability and selectivity of the\nextraction process can be achieved. In this contribution, we demonstrate suitability of\na five-phase μ-EME system for simultaneous extractions of cations and anions from\nurine and for selective extractions of basic analytes based on their acid-base strength\nfrom plasma.
|
| |
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Database conceived information assurance of E-shop operation
Debreczényiová Krammerová, Monika ; Vostrovský, Václav (advisor)
The main goal of this Bachelor thesis is to create a database design for an application that deals with the operation of a shop.
In addition to the clarification of the theoretical principles of relational database technology is an important part of the definition of the requirements for the data model, influenced by current trends in the field of the data record shop.
The core parts of the proposal itself, however, is a conceptual data model corresponding to the requirements set out in the previous section.
|
|
Zalužanský Brook Restoration Project
Lašek, Jakub ; Kalibová, Jana (advisor)
This thesis contains restoration project of chosen section of Zalužansky brook in Ústecký kraj. Project is processed at the level of documentation for territorial management according to decree no. 499/2006, of buildings documentation. Theoretical part captures professional literature research dedicated to restorations, spatial planning and buildings documentation. Analytic segment closely defines and characterise location of interest at first, although major part consists of designed restoration measures following requirements for creating a building documentation by mentioned decree. Benefit from this thesis is it's possible usage as a background material for documentation created by authorised engineer for water management and landscape planning.
|
|
Puppies and young dogs nutritions
Šabatová, Kateřina ; Hučko, Boris (advisor) ; Plachý, Vladimír (referee)
Puppies and young dogs nutritions Summary In this work I have attempted to summarize the most important aspects in nutrition of puppies and dogs in growth. The introduction describes the digestive tract and also the changes that have occurred due to domestication. Next is explained the importance of nutrition and water in nutritional requirements of a dog. Important are needs of nutrients and energy that are necessary to maintain the provision of the necessary vital functions. The basic components of food are proteins, saccharides, lipids, minerals and vitamins. I explain the necessary proportions, the amounts and the possible consequences of their lack in food. I focus on essential fatty acids, which in recent years are subject to frequent explorations and their pros and cons are not yet fully understood. I also mention ballast and significant specific active substances. Nutrition of pregnant and lactating females is often neglected, but for puppies it is a very crucial period. The influence of nutrition of pregnant females to the size and weight of newborn puppies has been proved. Further I deal with nutrition of puppies immediately after birth, I explain the composition of colostrum and its effect on the immunity system of the puppy. I also compare ratios of nutrients in the colostrum and milk. Further, I deal with the feeding of the individual at the time of weaning and in different growth periods. There are many possibilities of feeding puppies from after weaning until adulthood described in books. With the new knowledge about nutrition the ways of feeding our dogs have inevitably changed , but also the dogs' nutritional requirements have changed due to the conditions where and how they live and what their nutrient needs are according to their sport, breeding or other use. Currently, there is a possibility of a commercially produced complete nutritional diet or home-prepared fresh food - cooked or raw- barf. In the last chapter, I summarized possible aspects of malnutrition and its potential consequences. I described the most common problems associated with inadequate nutrition of growing dogs such as obesity as well as malnutrition, which also adversely affects the individual. The influence of proper nutrition of the puppy on its growth is clear. If we neglect the nutrition of the dog in the first two years of its life, the consequences are often irreversible.
|
|
The Wine Market in the Czech Republic and the Politics of Wine
Vlašicová, Eliška ; Tomšík, Karel (advisor) ; Malý, Michal (referee)
The dissertation thesis is focusing on the wine market in the Czech Republic. The aim is to identify weaknesses in the wine sector in order to formulate recommendations for improving a current situation in the sector. The Common Agricultural Policy of the European Union and the Common Market Organisation for Wine was presented in the theoretical part of the thesis, where also theoretical aspects of a market including supply and demand were described, as well as an agri-food market and its specifics, wine commodity chain, determinants of demand, supply and prices of wine. In the following chapters an analysis of the wine market, especially with emphasis on the production potential of vineyards in the Czech Republic was created, and demand, supply and price of wine including a price transmission in the commodity chain of wine were modelled based on a regression analysis. The significant influence on demand of wine have had previous values of wine consumption and wine prices, substitutes consumptions (prices of substitutes were not a significant factors), household income and salary, a quality of the wine and awards in international competitions. Significant factors of the side of supply including the price of wine grapes, the price of wine, vineyard area, production of wine grapes, some aspects of weather and certain subsidies. A climate change, which is in progress, may result to the expansion of viticulture and winemaking in the Czech Republic and also to a change of varieties in vineyards. Demand has in the commodity chain of wine greater impact than the supply. It can have a negative effect on growers or winemakers. Planting of vines is not sufficient to maintain current levels of a production potential of vineyards in the Czech Republic. The ideal amount of annual planting vines should be about 655 ha. A related issue is financing a vineyards renewal, which is costly. Based on a financial analysis of small and medium-sized wine companies, it was found that these businesses cannot afford the renewal of vineyards from its own resources and will require grant assistance of the state, eventually EU.
|
| |
|
Frequency stabilized semiconductor laser source for high-resolution interferometry
Řeřucha, Šimon ; Hucl, Václav ; Holá, Miroslava ; Čížek, Martin ; Pham, Minh Tuan ; Pravdová, Lenka ; Lazar, Josef ; Číp, Ondřej
We have assembled an experimental iodine stabilized Distributed Bragg Reflector (DBR) diode based laser system lasing at a wavelength that is in a close proximity to the wavelength of a stabilized He-Ne lasers traditionally used for metrological applications (λ=632.9 nm in vacuum). The aim was to verify whether such a system could be used as an alternative to the He-Ne laser while yielding wider optical frequency tuning range, higher output power and high frequency modulation capability. We have measured the basic characteristics of the laser source and then we have compared the performance of the laser system with that of a traditional frequency stabilized He-Ne laser with a series of experimental arrangements similar to those usually found in laser interferometry and displacement metrology applications. The results indicate that DBR diode laser system provides a good laser source for applications in dimensional (nano)metrology since it provides more output power and advanced tunability options than stabilized He-Ne lasers while maintaining fundamental requirements such as the frequency stability, coherence length and also a defined traceability.\n\n
|
|
The impact analysis of the technical devices used by the driver on the reaction time
Kubánek, Ondřej ; Bradáč, Albert (referee) ; Panáček, Vladimír (advisor)
This master‘s thesis analyzes the impact of the use of technical equipment for the driver reaction time. There are described the legal requirements for the use of technical devices by the driver in the vehicle. There are analyzed the types of technical devices used by drivers and mainly discussed the issue of drivers' reaction times. They assessed factors affecting reaction time, ways of measuring the reaction time and the type of reaction times. They discussed earlier research from the beginning of the measurement of reaction times to the latest research, dealing with the measurement of reaction times when using a mobile phone. The practical part is devoted to perform road tests on a sample of drivers and evaluate their reaction times during normal driving and during a call. The measured and evaluated data are commented with respect to the benefits of expert activities in the field of transport.
|
guest ::
