|
|
Inverter for arc welding
Matiaško, Maroš ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This bachelor’s thesis describes designing, paremeter rating and construction of welding source on the principle of high-frequency inverter. The main scope of work is to design a switching inverter for arc welding on the principle of the forward converter. Welding source is regulated for demand of constant current.
|
|
|
Design of audio power amplifier with Bluetooth connectivity
Bartoň, Jan ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
This bachelor‘s thesis deals with the task of designing an audio amplifier, operating in class D, with a nominal output power of 2 x 80 W with Bluetooth connectivity, supplemented by an equalizer and a state display. A power supply and a user interface are designed as well. At first, research regarding audio amplifiers is made, followed by a more thorough description of class D operating principles. Afterwards the actual synthesis of the desired amplifier is presented, followed by the power supply design procedure. The correctness of the synthesis is later verified by simulations in PSpice and LTSpice. Theoretical design is then practically built, and its parameters are confronted with expected values by measurements.
|
|
|
Low-power electrical sources
Kotásek, Ondřej ; Pazdera, Ivo (referee) ; Procházka, Petr (advisor)
In the theoretical section describes the different types of DC / DC converters, which are among the best known. It's a drive with one storage element, decreasing and increasing non-inverting converter, an inverting converter with a common choke and Čuk’s changer. The second part deals with the actual design and implementation of the two input sources for low power. Here are described two main components designed for each circuit. Furthermore, the work to create schematics and PCB in Eagle. Finally, learn how to solder components on the PCB made.
|
|
|
Electronic parts of small fotovoltaic power plant
Benda, Dušan ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
The thesis describes the design, implementation and subsequent testing of electronic circuits for usage in small photovoltaic power plants. It focused on the sub-power appliances, battery charging and monitoring of photovoltaic panels. Introduction of this work deals with selecting appropriate controllers for each subsystem and comparison of the proposed facilities with commercially available applications. A substantial part of the work describes the selected controller for each subsystem implemented and circuit design of the individual components of electronic systems in detail. For each subsystem are implemented measuring and comparing the results achieved.
|
|
|
Controllable switching power supply 0-1000 V / 100 W
Hofmann, Oldřich ; Procházka, Petr (referee) ; Martiš, Jan (advisor)
The thesis deals with the design and construction of a switching power supply with output voltage adjustable from 0 to 1200 V and rated power of 120 W, which will be used to replace the existing high voltage power supply for the irreversible electroporation (IRE) device developed at UVEE FEEC BUT. The thesis focuses on a basic description of the IRE device, a description of usable converter topologies and a selection of the best topology for the required purpose. The selection of the control circuit concept and its design are also integral parts of the thesis. The final part of the thesis contains the assembly of the power supply and the measurement verifying its function.
|
|
|
Optimization of the switching power supplies with synchronous rectifier
Skácel, Josef ; Macháň, Ladislav (referee) ; Žák, Jaromír (advisor)
This thesis deals with switching circuit topic, especially switching power supplies. There are switching circuits without inductance and their benefits presented in the thesis. Basic topologies of switching power supplies, their properties, application area and functions of basic types of converters are also described. The next section focuses on special resonant switching power supplies and synchronous. The main part of the work is carried out simulations using three synchronous rectifiers. The work includes practical design of an SMPS with synchronous rectifier.
|
|
|
DC/DC converter 24 V / 320 V / 60 W for a back-up supply source with a galvanic separation
Dvořák, Petr ; Martiš, Jan (referee) ; Vorel, Pavel (advisor)
This bachelor‘s thesis deals with the design, dimensioning and realization of a DC/DC 24 V / 320 V converter with a output power of 60 W. In the first part there is a short description of the linear stabilizer and then the switching sources with their dismemberment. Based on that chapter, was selected the flyback converter. The second part deals with components design and description of the control circuit. At the end, the construction of the converter with the verification measurement records is shown.
|
|
|
Usage of High Power Inverters in High Voltage Sources
Zemánek, Miroslav ; Janča, Jan (referee) ; Boušek, Jaroslav (referee) ; Patočka, Miroslav (advisor)
This work is concerned with power inverters for alternate high voltage power sources. The theoretical part describes the topology of inverters that can be used in alternate power sources. A model of voltage transformer is described in details to better understand the parasitic effects that are inevitably present in high voltage power sources and, therefore, have to be taken into consideration at the design of high voltage power sources. The work is oriented to problems of alternate high voltage power sources for ozone generators. This is the reason, why the theoretical and, partially, also the experimental part deal with the properties of ozone and its use. The experimental part solves high voltage inverter with capacitive load that is formed by discharge element of an ozone generator. Designed inverter is able to feed the capacitive load with high voltage at very short periods of time from several microseconds up to tens of nanoseconds. In comparison with the length of voltage pulses in common ozone generators, this pulses are more than 100-time shorter. This has a positive effect to silent discharge characteristics.
|
|
|
Charger for lead-acid accumulators 12V with the aditional fuction "start-car"
Benada, Tomáš ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This thesis is engineering design of the intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR". It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger small, lightweight and portable. The Intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR“ charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 20A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. The device comprises safety protection for the charger, supply network and battery. There are three LEDs placed on the front side of the charger reflecting status of the device.
|
|
|
Step-Up converter for mobile device
Gabriel, Petr ; Červinka, Dalibor (referee) ; Huták, Petr (advisor)
The purpose of this bachelor‘s thesis is about to intoduce possibilities of construction and use of switched power supplies. Thesis focuses mainly to description of different types of converters. There are possibilities of power supplie's design and sizing of its components described in this thesis. This thesis contains concrete design of power supply for realization. There are results of the measurement and comparision to the parameters given by manufacturer set forth at the end of this thesis.
|
guest ::
