|
Influence of solidification conditions on structure and properties of austenitic chrome-nickel steels
Ambrož, Ondřej ; Čech, Jan (referee) ; Záděra, Antonín (advisor)
The thesis deals with the influence of solidification conditions on structure and mechanical properties of austenitic stainless steels. The first part involves the distribution of stainless steels and a basic understanding of the issue of achieving the desired structure and mechanical properties. The second part is focused on austenitic steels and their basic characteristics. This section also describes the experiment and the results achieved. Finally, these results were evaluated and further research steps were recommended.
|
|
A Stefan problem of heat conduction with phase change and its exact solution
Kesler, René ; Mauder, Tomáš (referee) ; Klimeš, Lubomír (advisor)
This bachelor's thesis deals with analytical solutions of heat conduction problems with phase change which are known as classical Stefan problems. At the beginning a differential equation of heat conduction is derived and a mathematical model of Stefan problem is formed. The greatest attention is paid to the derivation of analytical solutions for cases in which these solutions are obtainable. The MATLAB environment was chosen for implementation of the obtained solutions. The thesis also includes a description of the program and its graphical interface in MATLAB. The applicability of the program is demonstrated in several phase change problems.
|
|
Immobilization of heavy metals in the cement matrix with the admixture of natural zeolite
Semerádová, Nikol ; Bayer, Patrik (referee) ; Vyšvařil, Martin (advisor)
Heavy metals released to the natural ecosystem constitute significant risks not only for organisms, but also for water supplies in the nature. There are a number of analytical methods for the determination of heavy metals. Each of them is suitable for different element and its character. Since the results of the analysis are applied during the solidification and stabilization, it is necessary to ensure the highest correlation between hazardous waste and solidification medium for maximum inhibition of toxic ions. This work investigates the stabilization of heavy metals binders based on cement base with admixture of the natural zeolite and its possible use for the solidification of heavy metals in soluble form.
|
|
The Segregation in Ferrous Alloys when Casting Heavy Castings
Pernica, Vítězslav ; Čech, Jan (referee) ; Vodárek, Vlastimil (referee) ; Havlíček,, František (referee) ; Šenberger, Jaroslav (advisor)
This thesis is dedicated to the field of manufacture of heavy steel castings with resulting properties which are influenced by long solidification time. During the long solidification time a segregation process of additives in the steel occurs which results in numerous metallurgical defects. The work was intended to observe the macrosegregation effects in the wall of a heavy experimental steel casting respectively a part of a real superheavy casting intended for cement furnaces (weight 210 t). The steel casting for the research was manufactured in the joint-stock company of VHM where such heavy castings are commonly produced for the market. The supplied piece of the steel casting was cut into the smaller pieces for the better examination. The examination resulted in information about the casting macrostructure and chemical heterogeneity of chosen elements in the casting wall. The heterogeneity of the chosen elements (C, Mn, Si, Cr, S, P) is clearly shown in the worked out visual concentration maps. Based on the experimental data the measured results of segregations were confronted with the results of segregation modelling with the use of the commercial simulation software ProCAST. It resulted in the conclusion that the prediction of segregations is not in accordance with the reality. Furthermore, the results from the experimental casting are shortly compared with previously manufactured castings of the same type and the results summarizing the found range of macrosegregations of the tested sample are interpreted in the work conclusion.
|
| |
| |
|
Properties and the Use of Metal Foams
Křivánek, Robin ; Liškutín, Petr (referee) ; Němec, Karel (advisor)
In this thesis are summarized the findings of metal foams, with prevailing constraints on aluminum foam, because in them hides the greatest potential. The first part is described the production of porous materials, especially the way of floam production by thermal decomposition of floaming agent and melt gas injection. There are also written stress tests to gain a deeper knowledge of their properties, but also the latest exploring methods of foams, such as using a radioscopiy and CT scanner from which then creates a voxel model of foam. They are summarized here the basic ways of processing. Finally we must mention the possibility of using these materials with a focus on commercially produced foams Alporas® and Duocel®. Mass using foams mainly prevents high production costs and in some cases difficult reproducibility of properties.
|
| |
| |
|
Solidifikace ionesu s přídavkem dastitu v geopolymerné matrici
Černoušek, T. ; Hendrych, J. ; Sobek, Jiří
Solidification of ion exchange resins is specific in comparison to other liquid and solid RAW for all that use geopolymers, cements or other inorganic matrix. In contact with water the unsaturated ion exchange resin the swelling occures and internal pressure arises, and can reach up to 50 MPa. These changes can disrupt the process of solidification, cause cracks, which finally deteriorate the solidificate leaching parameters and lead to a decrease weight ratio of ion exchange resin to binder. To increase the loading capacity of ion exchange resin into the geopolymer the additive representing highly absorbent material Dastit has been tested, in terms of mechanical properties.
Fulltext: content.csg - PDF Plný tet: 025 - PDF
|