|
|
Front end of the fuel cycle
Sedlák, Miroslav ; Katovský, Karel (referee) ; Foral, Štěpán (advisor)
Bachelor thesis will work of the front of the fuel cycle. Summarize and describe the current knowledge related to uranium, the phase transformation of unemployable chemical element for mankind significant energy source. Understanding the process of processing uranium to energy source is invaluable importance for the future of energy. The use of uranium as fuel only brings advantages inherent in the usability element for humanity, but also the disadvantege of environmental threats and the threat of negative censequences to the environment in case of accidents. A thorough knowledge of the various stages of the fuel cycle contributes to increasing the safety of use of this chemical element for mankind and increasing efficiency in the conversion of uranium ore, thereby creating still more favorable conditions for the development of nuclear energy.
|
|
|
Nuclear Fuel and its Behavior during Burn-up
Matocha, Vítězslav ; Foral, Štěpán (referee) ; Katovský, Karel (advisor)
The point of this bachelor’s thesis is to characterize different types of nuclear fuels and their behaviour during the process of burning-up. Futher, basic types of nuclear reactors are mentioned, as well as their history and different kinds of nuclear fuels used in these reactors. Then there are pieces of information about fuel cycles and fuel burning-up. Furthermore, the thesis concentrates on the changes, which happen in the nuclear fuel during the process of burning-up, such as swelling and cracking. In its other parts, this bachelor’s thesis deals with fission products, mainly gas fission products are mentioned here. At the end of this thesis, a simple model of nuclear fuel burning-up is created. This model follows concentration of izotopes of uranium and plutonium during fuel burning-up.
|
|
|
Nuclear Fuel Cycle of Temelin NPP
Ježek, Martin ; Zlámal, Ondřej (referee) ; Katovský, Karel (advisor)
This bachelor's thesis deals with the central part of a fuel cycle in the power plant of Temelín. It describes generally the whole fuel cycle, from the process of uranium mining up to permanent storage of burned-up material and it shortly mentiones possibilities of its remaking. Neverthless, the main point is the middle part of the fuel cycle. In the next parts, the thesis concentrates on the power plant of Temelín. It describes shortly the WER-1000 reactor, which is being used there, and the active zone as well. There is a further description of both fuels used there, a fuel form a Russian corporation of TVEL, which is used nowadays, as well as a fuel from an American corporation of Westinghouse used in the past. The thesis then deals with the development of a fuel cycle from the moment of launching the power plant up to the present. The problems with the fuel from the American corporation are mentioned here as well. Then it concentrates on more-than-year long cycles and tries to quantify their contribution. The thesis contains a very simple project of an elongated fuel cycle and his evaluation from the point of working economy and organisation of shutdowns.
|
|
|
Front and Back End of the Nuclear Fuel Cycle
Winterová, Radka ; Mastný, Petr (referee) ; Katovský, Karel (advisor)
In this bachelor thesis author deals with the topic of nuclear power fuel cycle and the particular differences that are typical for each nuclear reactor types. The author aims to describe in detail both - the front and especially the back end of the nuclear fuel cycle, fuel fabrication for light water nuclear reactors, fuel reprocessing and recycling, and consequently fuel production based on REPU and MOX. Thesis should also get familiar with global approaches to fuel cycle, especially the back end.
|
|
|
Radiation damage of VVER-440 based Dukovany NPP reactor pressure vessel investigation
Říha, Tomáš ; Martinec, Jiří (referee) ; Šen, Hugo (advisor)
This master‘s thesis deals with radiation damage of reactor pressure vessels, specifically of NPP Dukovany Unit No. 3. In general damage mechanisms of reactor steels are described and possibilities of monitoring of material degradation and its recovery used at NPP’s all over the world are mentioned as well. A practical part of the thesis is focused on interpretation of analyses carried out with the assistance of MOBY DICK code. The ground of these analyses is a neutron fluence value development on different locations of RPV for the whole life of operation up to 24th cycle. The analyses results are put into context with performed in-service inspections. The thesis follows up with neutron fluence computation for the future cycles containing new types of nuclear fuel up to 34th cycle. The outcome of practical part of the master‘s thesis is a comparison between new types of nuclear fuel with respect to radiation damage of RPV’s.
|
|
|
Analysis of possibilities for use of III. and IV. generation of nuclear reactors for the Czech Republic
Gajdzica, Lukáš ; Kopřiva, Radek (referee) ; Kopřiva, Radek (referee) ; Matal, Oldřich (advisor)
The thesis deals with the analysis of possibilities for use of III. and IV. generation of nuclear reactors for the Czech Republic. Introduction deals with basic principles of nuclear energetics and fuel cycle which is closely associated with the issue and its development and application in practice will have a significant effect both for choice of future types of nuclear reactors of IV. generation and the matter of settlement with spent nuclear fuel. In other parts the thesis deals with the present state of nuclear energetics in the Czech Republic, compares concrete chosen types of nuclear power plants of III. generation and generally describes nuclear reactors and power plants of IV. generation. Final part of the work is focused on questions concerning the possibility of construction of new blocks of nuclear power plants in the Czech Republic and presents concrete recommendation from author´s point of view.
|
|
|
Nuclear Fuel Loading Patterns at VVER Reactor Based Nuclear Power Plants
Šajdler, Miroslav ; Vojáčková, Jitka (referee) ; Katovský, Karel (advisor)
The Master's thesis focuses on loading patterns of nuclear reactors VVER. It describes the whole process of fuel cycle, since production to storage or reprocessing. The author puts emphasise on the middle part of fuel cycle in Czech nuclear power plants - Dukovany and Temelín and he also explains which fuels are used in both power plants now and which were used in history. The thesis also contains a basic overview of approaches to loading patterns optimisation in foreign countries. The final part of the thesis discusses practical calculation of loading patterns in the Block III of Nuclear power plant Dukovany, by using optimisation programme Athena and Moby-Dick macrocode.
|
|
|
Nuclear Fuel Loading Patterns Optimization at VVER Reactor Based Nuclear Power Plants
Šajdler, Miroslav ; Vojáčková, Jitka (referee) ; Katovský, Karel (advisor)
This Master’s thesis deals with optimization of loading patterns of nuclear reactors VVER. In the thesis is described the process of both types of fuel cycle – the closed and the open one. The middle part of fuel cycle containing the optimization process represents the crucial part of the thesis. The thesis is focused on the fuel cycles of the nuclear power plant Dukovany. The problem of the optimization is solved by using different programs. In the final part of the thesis, the program Athena for the loading patterns optimation is explained by a practical calculation for different versions of Moby-Dick macrocode and the calculated values for the optimization of the third unit of the nuclear power plant Dukovany are compared.
|
|
|
Fuel of nuclear reactors and fuel cycle
Bátěk, David ; Nerud, Pavel (referee) ; Šen, Hugo (advisor)
This bachelor thesis describes nuclear fuels used in today's nuclear reactors as well as parts of fuel cycle, which includes all activities like uranium mining and prepairing, energy utilization and storage at the end of a cycle. There are also information about world production of uranium and posibilities of manipulation with used nuclear fuel, including transmutation technologies.
|
guest ::
