|
|
Design of the morning sun simulator
Suský, Stanislav ; Krbal, Michal (referee) ; Štěpánek, Jaroslav (advisor)
This work deals with the introduction of the influence of electromagnetic radiation on circadian rhythms and their influence on the organism. The work describes circadian rhythms and their influence on the organism, the location and description of functions of important organs and the influence of electromagnetic radiation on these organs. There are described light sources and their influence on circadian rhythms.
|
|
|
Colorimeter
Škoda, Pavel ; Janáková, Ilona (referee) ; Honec, Peter (advisor)
This thesis deals with the analysis of the color parameters for their subsequent use in the design of the device, which will be used to measure their stability in continuous production. The theoretical part defines the basic concepts and knowledge needed to understand the problems. In addition, there are described individual components and sensors suitable for color measurement. The practical part deals mainly with the descrip- tion of the construction of the colorimeter, its individual parts and the creation of the control program. At the end, there are results of the testing of the product and their overall assessment
|
|
|
Modern Imaging Techniques in Medicine
Pařízek, Aleš ; Neuwirthová, Ludmila (referee) ; Rujbrová, Šárka (advisor)
Cílem této práce je popsat základní principy a fyzikální veličiny spjaté s jednotlivými zobrazovacími metodami a poté jednotlivé metody porovnat. Práce popisuje vznik rentgenového záření, jeho interakci s různými materiály a metody snímaní pro vytvoření obrazů. Dále se práce zabývá základním principem vytvoření 3D obrazů pomocí počítačové tomografie a jednotlivými generacemi tomografických strojů. V poslední části se práce věnuje principu nukleární magnetické resonance a základním parametrům pro vytvoření obrazů pomocí MRI systémů.
|
|
|
Bio-electromagnetic compatibility
Matulík, Martin ; Rozsívalová, Zdenka (referee) ; Matulík, Radomír (advisor)
Following work deals with problems of effects of electromagnetic radiation on living organisms. It goes into interactions of electromagnetic radiation with environment, effects on living organisms, physical units of biological tissues and sorting types of electromagnetic radiation to determine means of protection against adverse health reactions. It enlighten means of establishing sanitary restrictions, differences in legal aspects at Czech republic and worldwide, possible medical utilization, even principles of selected diagnostic and therapeutic techniques. It looks into shielding effects of common materials, ordinarily used for protection against ionizing radiation via findings of practical measurements. Series of radiofrequency measurements has been done with precise spectrum analyzers, which should reveal some basic problems of frequency bands, ordinarily used in current period.
|
|
|
The effect of the blue light on the human body
Dvořák, Petr ; Krbal, Michal (referee) ; Štěpánek, Jaroslav (advisor)
This thesis explains the term „blue light“. It deals with the sources of blue light and the effects of this type of electromagnetic radiance on human body. The focus is concentrate especially on problems, which are evocated of blue light. The biggest danger is the desynchronization of circadian rhythm and photochemical damage of retina – photoretinitis („blue light hazard“). The basic principles of biological processes and the visual system are described here. These processes are controlled by properties of incident light onto the retina of eye. The basic information about artificial sources of blue light commonly used in households and in industry are mentioned in the second half of work. These light sources were measured and elaborated. The electromagnetic spectrums of sources are portrayed and there is a comparison of sources due circadian effect too.
|
|
|
The utilization of infrared camera for measurement of electrical machines temperature
Halfar, Tomáš ; Janda, Marcel (referee) ; Kuchyňková, Hana (advisor)
Bachelor‘s thesis The Application of Infrared Camera for measuring the temperature of Electrical Machines acquaints with issues of heat, its creation and transmission. This work includes options of measuring of the temperature. There are given methods of contactless measuring of the temperature especially in this work. Main accent is given to problematic of measuring of the temperature with infrared camera SAT HY6800. The work includes introduction with basic functions of infrared camera and operation manual of the camera. It was created manual for utilization of program SAT report in relation to infrared cameras. In the practical part of bachelor’s thesis is measuring the temperature of three DC motors from company ATAS Elektromotory Náchod with different covers and comparing of their warming.
|
|
|
Temperature measurement in electric machines
Halfar, Ivo ; Huzlík, Rostislav (referee) ; Janda, Marcel (advisor)
The bachelor's thesis Temperature measurement in electric machines deals with beginning and exuding of the heat of electric motors and measuring of the temperature. The temperature is one of the most important values in diagnostic. High temperature could damage an isolation and it could tend to destroy of the whole machine. The temperature influences their magnetic properties on motors with permanent magnets. If you reach the Curie temperature it could come to its demagnetisation. Measuring of the temperature is important to verify allowable warming of motor or more precisely its spooling. The measuring of the temperature is needed for making motors with minimum of charges and its worth at the end. We could use two methods for measuring the temperature. It is contact and noncontact method. Warming and decomposition of the temperatures it is possible to appoint also with help of theoretic computations which are getting of the method of final elements. A lot of computer programs is using this method. Because of the existence of many sorts of electric motors, one of the viewpoints is the principle of working, another one is the construction. I concentrate on problems of asynchronous motors. In this bachelors thesis I have done theoretical calculation and contact and noncontact method of measuring of warming of the asynchronous motor.
|
|
| |
|
|
Health effects of ionizing and non-ionizing radiation
Gottvald, Martin ; Neoral, Jiří (referee) ; Bača, Petr (advisor)
This diploma thesis deals with electromagnetic radiation in its frequency spectrum. It also divides radiation into ionizing and non-ionizing. The principle of its effects and possible health problems from radiation exposure are also described. Hygienic limits – the maximum allowable and reference values of non-ionizing radiation are analysed too. The thesis should prove that the things of everyday need do not threaten the lives of human beings and are in compliance with the regulation No. 1/2008 Sb. on Health Protection Against Non-Ionizing Radiation. Measurement of low-frequency part is carried out with the cooperation of The National Institute of Public Health. Measurement of high-frequency part was carried out in 3 flats. The aim of this measurement was to find out the change of power density with the moving in a flat and the influence of the barriers (in this case walls).
|
|
|
Spectral properties of daylight as time-spatial function
Mayer, Jan ; Drápela, Jiří (referee) ; Baxant, Petr (advisor)
Graduation thesis describes basic data about Sun, suns constant, solar radiation thoroughfare by the earth's atmosphere. Thesis describes effects of components of optical radiation and physical character of solar radiation. Thesis also describes character of day lighting in nature, spectral distribution of natural lighting, average time of sunshine. The next point of thesis is description of measuring equipment Konica Minolta. In chapter measuring procedure is described measuring process of the sky radiance. Measurement analysis is mentioned in conclusion.
|
guest ::
