|
|
Apartment house with massage therapy in Vyškov
Vavřínek, Dominik ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The subject of this bachelor thesis is the design of an apartment house with massage therapy in Vyškov. The building has an atypical shape, partial basement and flat roof. The apartment consists of five above-ground floors and basement. In the basement there are a storage rooms, a bicycle room, a laundry room, a gym and a boiler room. On the ground floor there is one apartment, which is designed for people with reduced mobility and movement, as well as the massage therapy centre, which is separated from the housing part and has its own entrance. There is a total of 8 dwelling units from the second to fifth floor. Dwelling units on the fifth floor have a terrace. The main, as well as secondary entrance is situated from the north side of the building on the street of U Modrého. Parking lots for a total of 14 cars is situated on the eastern side. The apartment building is designed from a single masonry system with contact insulation. Both vertical and horizontal load-bearing system is made of Porotherm ceramic pieces. During processing, emphasis was placed on layout solutions, architectural appearance, statics requirements and safety of use.
|
|
|
Price analysis of building with changes of construction materials
Pospíšil, Petr ; Vovesný, Jan (referee) ; Aigel, Petr (advisor)
The following bachelor thesis concentrates on the analysis of construction expenditures dutiny the process of introducing material and construction changes. We have selected four variant of the given construction systems supplied by four different providers. This has been conducted under the following condition: all the four variants has a common heat transfer coefficient. U= 0,14 [W/m2K]. Among the selected systems we have included Heluz, Velox, Porotherm and Ytong. Under Heluz system we have chosen Heluz Family, ground surface, thickness 500 mm. This system does not involved contact insulation. As for Porotherm, we have decided for ceramic breeze blocks Porotherm 30, thickness 300 mm, to follow the obligatory common heat transfer coefficient, therefore we have also suggested contact insulation as of 220 mm. The third system, Velox permanent boarding, VELOX WS EPS PLUS thickness 420 [mm]. This system fully complies with the heat transfer coefficient requirements. Finally, we have used Ytong breeze blocks 300 mm in thickness. For this solution there also arose a need to design the contact insulation to follow the heat transfer coefficient requirements. For ech project variant we have designed project documuntation as a the basis for further budget item calculations pertinent to each single project variant. The item budget calculation was made using KROS PLUS programme. The overall budget prices and variables in each project variant have been comapred with each other, the data processed into several graphs accordingly. Among the variables we have included ground works, founding, vertical and complete constructions, horizontal constructions, surfaře finishing works, flooring and filling works, thermal insulations. Furthermore, purchasing prices for each invividual type of material, based on provider prices list, have been compared with prices as given by KROS PLUS programme.
|
|
|
Apartment building
Kolářová, Kristýna ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
This bachelor's thesis deals with project documentation for the construction of an apartment building in Olomouc, known as VILA PARK OLOMOUC. The designed apartment building has three floors, a basement with seven residential units and underground public parking. The vertical load-bearing structures are designed as reinforced concrete or Porotherm ceramic blocks. Non-load-bearing vertical structures as well as Porotherm ceramic blocks. The perimeter masonry is contact insulated. Horizontal structures are formed by monolithic reinforced concrete slabs. The roof of the building consists of a flat roof. The underground structure is formed as a white tank. Each apartment is well lit by large plastic windows. Each apartment has a terrace or loggia, which is lined with wood and creates a unique look of the apartment building. The building is designed with regard to the current and future surrounding buildings. Part of the bachelor's thesis is also a basic assessment in terms of building physics and fire safety solutions.
|
|
|
Apartment building
Obozhenyuk, Darya ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The main focus of the bachelor thesis was the development of complete project documentation for an apartment building that meets demanding requirements for energy efficiency. The building is located on the outskirts of the village of Ivančice and is located on land with parcel number 900/1. The building has an irregular rectangular shape. The apartment building has two above-ground and one underground floors. In the underground floor there are various cellars, garages and a technical room. The first and second floors include a total of eight residential units, four 3+kk apartments and four 2+kk apartments. The foundations are made of monolithic belts made of plain concrete. The construction of the underground floor is made of monolithic reinforced concrete, while the other perimeter walls are made of HELUZ ceramic blocks. To increase thermal insulation, contact insulation made of expanded polystyrene (EPS) boards was used, and the ceilings are made of reinforced concrete. The roof is designed as flat. An elevator is installed in the apartment building for easy and convenient access between floors. The staircase is made as a monolithic reinforced concrete slab.
|
|
|
Apartment building
Šošovička, Dominik ; Vystrčil, Jan (referee) ; Jelínek, Petr (advisor)
The assignment of the bachelor thesis deals with the design of a new residential building in the city district of Brno-Jehnice on Blanenská Street. The proposed building is freestanding, set into the plane. It has four storeys, a built-in elevator between a double staircase and a vegetated roof. The main entrance to the apartment building is provided from the north side. On the 1st floor there are cellars, technical background of the building and two apartments with their own front garden. In 2.NP to 4.NP there are 6 residential units with adjoining cellars. On the third and fourth floors the supporting structure gives way and creates terraces. The perimeter walls are made of ceramic block masonry with contact insulation. Horizontal structures are designed as reinforced concrete monolithic ceiling structure.
|
|
|
Apartment House in Prague - Michle
Pečinka, Martin ; Pilík, Václav (referee) ; Štěpánek, Ladislav (advisor)
The assigned bachelor's thesis deals with a part of the project documentation in the stage for the construction of a multi-functional house. In the bachelor's thesis, part of the architectural-construction solution assigned by the supervisor and part of the structural solution assigned by a consultant from the Institute of Structural Mechanics were solved. The multifunctional house is situated on a slightly sloping plot in the wider center of Prague. It has one underground and four above-ground floors. The underground floor is designed as a collective garage, in one half of the first above-ground floor there will be common areas of the apartment units, and in the other half a dental office. In the other three above-ground floors, apartments with layouts of 3 + KK to 4 + KK are designed
|
|
|
Apartment building
Mráčková, Kateřina ; Bartošová, Andrea (referee) ; Brukner, Bohuslav (advisor)
The bachelor's thesis with the topic of an apartment building in Dvůr Králové nad Labem prepares project documentation at the level for the construction. The building is located uptown of Dvůr Králové nad Labem. The part of the land is slighly sloped. The main purpose was to create initial, but comfortable living for couples and families. It is a newly built for-storey apartment building, which is partially basement. The apartment building has a total of 10 residential units, healthcare establishment, which has its own separate entrance of the south side apartment building, cellars, garage parking for six cars and technical structure of an apartment building. Given the current requirement of the respondent, apartments are designed on the firts floor 1.NP 2×2+KK, on the second floor 2.NP 2×2+KK and 2×3+KK and on the third floor 3.NP we find apartments 2×2+1 and 2×1+KK. It is a rugged house with the main entrance for the part of living from the north side. The building is based on foundation strips made of plain concrete. Vertical load-bearing and non-load-bearing structures are made of ceramic blocks. The whole building is insulated with a contact thermal insulation system. Horizontal structures are reinforced concrete monolithic. The roofing of the building is solved by a single-skin flat roof.
|
|
|
Apartment building, Přelouč
Zavadilová, Adéla ; Galata, Jindřich (referee) ; Müller, Jan (advisor)
The bachelor's thesis deals with the design of a new apartment building, located Přelouč. The apartment building is designed as a detached house and is set in a slightly sloping terrain. The building has a partial basement and three floors. The entrance to the building is located on the north side. The apartment building has 5 residential units of 2 + kk, 3 + kk, 4 + kk. The apartment building consists of an almost square floor plan with a protrusion, complete with balconies and a roof terrace with a recessed floor. The overall dimensions of the apartment building are 16.64 x 16.34 m. The apartment building is designed from ceramic blocks with contact insulation. Horizontal structures are designed reinforced concrete monolithic ceiling structures. The roofing is solved by flat roofs. The facade of the apartment building is white.
|
|
|
Apartment house U Jasanu
Štěpánková, Marie ; Pilný, Ondřej (referee) ; Kolář, Radim (advisor)
The bachelor’s thesis deals with the design of a new apartment building, located in Velké Meziříčí. The apartment building is designed as a detached house, set in a slanted terrain. The building has a basement with three floors. The entrance to the building is possible from the southern side. There is a total of 10 residential units in the apartment, spread from the 1st to the 3rd floor. In terms of size, the flats are a single room with a kitchenette (1+KK), two rooms with a kitchenette (2+KK) and three rooms with a kitchenette (3+KK). The building is in the shape of the letter T, with overhanging jetties located on the north-east and north-west side. On the south side, the residential units have balcony structures. The overall floor plan‘s dimensions of the apartment building are 24.12 x 11.92 metres. The apartment building is designed in Porotherm technology with contact insulation. The horizontal structures are designed as a reinforced-concrete-monolithic-ceiling structure. The roof of the apartment building is realised by using a non-walking vegetation flat roof. The color of the facade is white with shades of light grey in the overhanging structures and in the stairwell.
|
|
|
Apartment building
Jakubec, Marek ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The task of this bachelor's thesis was to process the project documentation for the construction of an apartment building in the city of Brno. The apartment house is a free-standing, with three storeys and no basement. The building is covered with a flat roof. On the 1st floor there are 3 garage spaces, cellars and technical facilities of the building. There are a total of 4 housing units on the 2nd and 3rd floors. On the second and third floors, the structures recede and create terraces in two apartments. The other two apartments have their own balconies. Perimeter masonry is made of ceramic blocks with insulation. The ceiling structure is made of reinforced concrete. The bachelor thesis also contains an assessment of the building in terms of building physics and fire safety.
|
guest ::
