|
|
Computer Network Design of the Company
Dočekal, Filip ; Jordán, Vilém (referee) ; Ondrák, Viktor (advisor)
The bachelor thesis is focused on a suggestion of an operational computer network in a particular building. The thesis deals with the analysis of a present situation and according to its results is implemented my own solution. The solution must be operational, easily expandable and it will meet the requirements which will be agreed with the investor.
|
|
|
Nonlinear Response of Steel Structures on Statical Loading
Nezbedová, Anna ; Vlk, Zbyněk (referee) ; Kala, Zdeněk (advisor)
This paper deals with the nonlinear response of steel structures to static loads. There are formulas derived for nonlinear analysis compressed, bended and tension members. By compressed elements, there is described the issue of buckling, by the bended, it is lateral-torsional buckling and tension elements are cables. As an example there is an calculation of a suspension two spans pedestrian steel bridge under load action of asymetrical loads. As another possible calculation process, the finite elements method is described.
|
|
|
Crane Hook Block - Lifting Capacity 16 tons
Straka, Miroslav ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is the design of crane hook block with a capacity of 16 tons. Pulley block used for lifting and moving loads in a medium heavy-duty use. It is equipped with a simple hook. The work, therefore, the proposal contains solutions rope transfer, strength and dimensional calculations of components and assembly drawings, axes, pulleys and nut hook.
|
|
|
Roof of the swimming pool
Pelikán, Adam ; Šopík, Leonard (referee) ; Stráský, Jiří (advisor)
This diploma thesis is about designing the structure of roof of swimming stadium. Three solutions are created - concrete arc with tie, steel truss slab and concrete pretensioned membrane. One choosed solution - concrete pretensioned membrane - is afterwards developed. In the beginning there are several designs of geometry fulfilling the requirements for given type of structure being created. In part of static calculation, the parametrical mathematical model in form of macro in APDL language for Ansys software has been created. Afterwards all the parameters (initial state of cables, level of pretension, dimensions of membrane and peripheral frame, etc.) has been optimized in order to the membrane be fulfilling criterias for ultimate limit state and serviceability limit state. Afterwards other selected parts of structure has been checked. On basis of designed geometry and design checks in static calculation the drawings of conctruction and designed parts has been created. In the end, the 3D model of the structure has been created in graphical software Rhinoceros. Then visualizations of structure in concstruction stages and after completion has been rendered.
|
|
|
Model for the Cable Thermal Characteristic Calculation
Starý, Zdeněk ; Drápela, Jiří (referee) ; Orságová, Jaroslava (advisor)
The result of this assignment is the Model for the Cable Thermal Characteristic Calculation. Firstly, there is a prepared overview that is focused on the essential ideas of cable technology. The following part describes the simple possibilities of passaging the heat. Secondly,the physical essence of warming cables as well as the possibility to discover the methods how to calculate the warming cables are also mentioned in this task.There is an opportunity to find the methods for calculating the warming cables as well. The model was verificationed in the conclusion of my assignment. The measurement was done and the empirical results were compared with the results that were achieved by modeling.
|
|
|
Cable harness tester
Valenta, Jakub ; Valach, Soběslav (referee) ; Burian, František (advisor)
This semestral paper deals with the issues of testing and requirements examinations for cables and cable harnesses. These terms are defined in the work and the difference in their meaning is described. The work also describes the characteristic features of cables and cable harnesses, explains their importance and focuses in more detail on the variable properties that may change over time or that are dependent on manufacturing errors. The principles and procedures of tests of these properties are covered in the work and are the essence of the subsequent practical part. In this part, the work deals with the design of the measuring circuit prototype for testing of the insulation resistance of cables and their desired continuity in bundles. This design is then physically implemented, the processes of designing and implementing are described in detail and finally its functionality is tested and presented to the reader.
|
|
|
Suspension footbridge across the river
Chumová, Petra ; Bartoň, Jaroslav (referee) ; Nečas, Radim (advisor)
The subject of the thesis is to design a suspension footbridge over a river basin. Three different studies were created for the assigned problem. The suspension footbridge was chosen for the thorough elaboration. The most important part of the thesis is the static solution of the supporting structure. The structure model for calculation of impacts of selected strains including the impact of the footbridge construction was created in computational software Ansys. Assessment and dimensioning was carried out using manual calculation according the principles of limit states and applicable standards.
|
|
|
Phone line simulator
Vítek, Jiří ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
This master’s thesis is focused on the problems of designing telephone lines which are 7 km long with a step of 1 km. The thesis contains a detailed description of the basic parameters of metallic transmission lines. There is also briefly mentioned the issue of interfering the transmission lines. The main part is devoted to a system design of artificial lines connection, including printed circuit board design. The next section deals with a design of prototype controlling. The last part verifies the activity of implemented artificial lines.
|
|
|
Stress ribbon structure
Sedlářová, Lucie ; Novák, Richard (referee) ; Nečas, Radim (advisor)
The diploma thesis deals with a project of a pedestrian bridge across the valley. At first, there was a comparison of three options of a bridge, then the option of a prestressed concrete band was selected. The main aim of the diploma thesis is the design of the construction, the creation of a model in the programme Ansys 12.1 and the subsequent assessment in accordance with the current regulations.
|
|
|
Proposal of the reconstruction of the distribution network in a specific area
Novák, Vojtěch ; Mrvová, Dana (referee) ; Blažek, Vladimír (advisor)
This diploma thesis is concerned with reconstruction of distribution network in Hruba Vrbka. The diploma thesis is divided in two parts. For better understanding to this issue, the first theoretical part is shortly dedicated to the history of electrical power system, to the several types of distribution network of low voltage and high voltage and their utilization in the area, considering the reliability and the quality of delivery of the electric energy. In this thesis there is mentioned division of distribution grids according to placing of cable lines, according to voltage and according to type of grid connection. Next part of this work is dedicated to the description of overhead lines and cable lines and their characteristics. For the proper concept of the grid we should know some characteristics of the electric line’s proposal: mechanical strength, warming, voltage drop, efficiency, degree of safety and provision of delivery. In the end of the theoretical part there are described methods for calculation of grid’s steady state as a linear task and also non-linear task, elimination of the balancing node, the iterative method, the reduction of external power take-off nodes and the solution of the steady state of the network through the direct current model. The second part of the diploma thesis is concerned with the calculation of the steady state in the village Hruba Vrbka. In this part is also described the KASI program which was used for the calculation of the grid’s steady state. Firstly low voltage grid’s balance in Hruba Vrbka was found out and evaluated and then there were proposed some solutions of the reconstruction for the grid improving. The suggested options of the reconstruction are considered from technical and economical point of view and the best solution is chosen. For this solution there is suggested the protection through program SICHR 9. In the end of this diploma thesis there is checked the load of the high voltage line.
|
guest ::
