|
|
Trends in Solder Paste Area and Nanoparticles Influence
Dosedla, Milan ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
This thesis deals with novel trends in solder paste technology. It focuses on nanoparticle applications used as a tool for improving a state of the art lead free solder alloys. The recently published results about the impact of different types of nanoparticles on properties of newly-emerged nanocomposite solders are discussed and summarized in the thesis. Preparation, practical application and testing of new solder paste based on low temperature SnBi alloy with an admixture of titanium dioxide are also discussed. Finally, properties of solder joints using these solder pastes are investigated and the results are evaluated.
|
|
|
Creep-fatigue models for solder joints reliability prediction
Novotný, Václav ; Šandera, Josef (referee) ; Švecová, Olga (advisor)
This project is focused on utilization of creep-fatigue models for estimate of reliability lead-free solder joints. It describes basic groups of creep-fatigue models, their usage for estimate of reliability solder joint, advantages and disadvantages. There are discusssed properties of single models, which are on different base. Purpose of this project is find optimal creep-fatigue model for lead-free solder and devise a test structure to which the model will be verified. Results are compared with theoretical calculations.
|
|
|
Creep-fatigue models for solder joints reliability prediction
Novotný, Václav ; Šandera, Josef (referee) ; Švecová, Olga (advisor)
This project is focused on utilization of creep-fatigue models for estimate of reliability lead-free solder joints. It describes basic groups of creep-fatigue models, their usage for estimate of reliability solder joint, advantages and disadvantages. There are discusssed properties of single models, which are on different base. Purpose of this project is find optimal creep-fatigue model for lead-free solder and devise a test structure to which the model will be verified. Results are compared with theoretical calculations.
|
|
|
Solder Joint Reliability Prediction
Stejskal, Petr ; Skočil, Vlastimil (referee) ; Hovorka, Ladislav (referee) ; Kazelle, Jiří (advisor)
The thesis deals issue of the solder joint reliability and diagnostics. The manufacturing technology of electronics currently features a very high level of perfection. A large number of electrical devices ends its functional life due to solder joint failure. The objective of presented research consists studies of processes taking place in the solder joint due to soldering and after soldering. To this end, I will employ several methods of diagnostics. Noise based methods of solder joint measurement was evaluated. Based on a detailed study and understanding of processes it can be solder joint reliability predicted.
|
|
|
Reliability of Lead-free Solders and the Selected Methods to Estimate its Lifetime
Švecová, Olga ; Kolařík, Vladimír (referee) ; Urbánek,, Jan (referee) ; Šandera, Josef (advisor)
The doctoral thesis is focused on reliability of lead-free solder SAC 305. Knowledge in the field of fatigue models used in determining the lifetime of solder joints are observed in this thesis. Also such methods of predicting reliability as numerically-analytical methods or reliability experimental tests are mentioned. Practical results of reliability measurement are presented. Experimental data served as the foundation for determining empirical coefficients for the fatigue model based on deformation induced by creep of the solder, which was implemented in the ANSYS environment. Results from different methods were compared and conclusions discussing the suitability of the presented prediction methods are formulated.
|
|
| |
|
|
The possibilities of SMD components soldering by equipment Fritsch
Juračka, Martin ; Šandera, Josef (referee) ; Adámek, Martin (advisor)
This thesis focuses on soldering technology in microelectronics. It describes in detail the basic ways of soldering and repairs in electronics. This piece of work shows the principles of technological equipment for bulk soldering and used repairing devices. In the theoretical part of this work there are also briefly described the packages for integrated circuits that were used in the practical part of the thesis. The practical part of the thesis deals with setting of the heat profiles for hot air repair station Fritsch Mikroplacer for LQFP64, SOIC16, TSSOP14, QFN16 and DSBGA5 packages. The heat profiles for assembly and disassembly of the particular types of the packages on designed and manufactured test printed circuit board were set and tested. The resulting heat profiles are compared with the recommended heat profile of an ordinary solder paste SnAg3Cu0,5 which was used for the test. This thesis can serve as an aid for the further settings of heat profiles in other types of packages not only on Fritsch Mikroplacer devices, but also on other repairing devices of this type.
|
|
|
Termomechanical reliability soldered connections in electronic
Novotný, Václav ; Psota, Boleslav (referee) ; Šandera, Josef (advisor)
The diploma thesis deals with the sphere of solder joints reliability. The narrower focus is use of lead-free solder alloy SAC305 in the production process and parameters of its reliability. The text describes the main factors, which have the influence on the reliability of solder joints under conditions of thermal cycling. These factors also relate with choice of substrates and technological processes of preparation, which are characterized and described. Another part is devoted to estimating the reliability of soldered connections and are listed the fatigue model to estimate reliability. These fatigue models are categorized based on different physical mechanisms that operate in the soldered joints during operation. Based on the comparison of different models is selected the most appropriate model and in conjunction with simulation in ANSYS is estimated reliability. For this purpose is selected soldered connection of the FR-4 substrate and ceramic substrate via SMD component. They are manufactured test kits and subjected to conditions of temperature cycling. Results obtained from experimental measurements are compared with results obtained by simulation and calculation.
|
|
|
Design and realization of the pull strength measuring device for SMD
Valíček, Jan ; Klíma, Martin (referee) ; Otáhal, Alexandr (advisor)
This thesis deals with the design and implementation of a device for measuring pull strength by surface mounted devices (SMD). It analyzes the theory of pull strength testing of solder joints with emphasis on standard IEC 62137-1-3 and describes the selection of components utilized to create mechanical construction and electrical parts. These electronic parts made or innovated in this work were control system based on microcontroler Atmega164P, power circuit for stepper motor and communication of measure equipment TEST 321 with PC. The whole design is complemented by simulation of mechanical stress to the critical components using ANSYS. The conclusion summarizes the most important parameters of this equipment.
|
|
|
Machanical testing of solder joints
Drab, Tomáš ; Šandera, Josef (referee) ; Szendiuch, Ivan (advisor)
The project contains theoretical research of electrotechnical manufacture for lead-free reflow soldering. It contains characterization of soldering processes. Includes variations of solder paste printing, principles of part placing and also reflow soldering process. The project appoints possibilities of testing solder joints strength, mainly focused on mechanical vibrations. It describes a design and preparation of solder joint strength test methods by mechanical vibrations. It compares influence of vibrations on part types and solder alloys.
|
guest ::
