|
|
Composite Dental Biomaterials - Structure, Analysis and Properties
Matoušek, Aleš ; Vaněk,, Jiří (referee) ; Lapčík,, Lubomír (referee) ; Cihlář, Jaroslav (advisor)
The aim of this work is to define relations between grain size and bioaktivity of oxide ceramics, specifically ZrO2, Al2O3 and HA. Ceramic materials with grain size from 100 nm up to 10 m, with various surface roughness, were tested for its bioactivity. Ceramography analysis was performed for all tested materials to precisely describe microstructures. Biological properties of the ceramic materials were tested via dilation tests directly in-vitro and by in-vitro extraction. Three cell culturing lines: osteoblast MG63, fibroblast L929, and epithelioid HeLa, were used for our testing. An influence of the grain size on the biological response was only found for the ceramic materials which had been thermally etched. The thermally etched nanocrystalline samples had larger areas covered by cells than ceramics with coarse grain microstructure. Biological tests on layered composites Al2O3×ZrO2 showed the cell selection determined by the type of material, where ZrO2 surfaces were preferably covered. Improved biological response of nanocrystalline ZrO2 was demonstrated on ceramic ZrO2, Al2O3 and SiO2 substrates with nanocrystalline coating of ZrO2. In this work a novel technological process for the formation of defect-free coatings was developed. Sintered coatings were tested using in-vitro technique with cell line HeLa, L929 and MG63 for up to 72 hours. The results of the biological tests of nanocrystalline coatings were consistent with results from the bulk nanocrystalline thermally etched ZrO2 ceramics.
|
|
| |
|
|
Selective growth of metallic materials.
Šimíková, Michaela ; Schneeweiss, Oldřich (referee) ; Čechal, Jan (advisor)
The diploma thesis deals with selective growth of cobalt thin films on lattices created by focused ion beam on Si(111) substrates with thin film of silicon dioxide. Further, the growth and morphology of iron thin films growing on Si/SiO2 substrate without modification was studied. In the last part, thin film of a-C:H, influence of preparation parameters on their growth and ratio of sp2 and sp3 bonds, was investigated. For analysis of those films XPS, AFM, and SEM metods were used.
|
|
| |
|
|
Preparation of graphene layers by various methods and characterization of their properties
Zahradníček, Radim ; Bartošík, Miroslav (referee) ; Lišková, Zuzana (advisor)
This bachelor's thesis deals with the production of graphene by different methods. Graphene was prepared by mechanical exfoliation and chemical methods. Graphene oxide (GO) was first prepared by modified Hummers method and disolved the solution in isopropyl alcohol. It was subsequently reduced by photoreduction, UV radiation and thermal reduction. Produced graphene samples were characterized using optical microscopy, electron microscopy, atomic force microscopy, Raman spectroscopy and X$-$ray photoelectron spectroscopy. Measurement results and evaluation of production quality of graphene are shown in this work.
|
|
|
Preparation of Ag/Co/Ag Trilayers
Burda, Pavel ; Kolíbal, Miroslav (referee) ; Čechal, Jan (advisor)
The Bachelor's thesis is aimed to the preparation of silver and cobalt ultrathin films. The films are formed on modified surfaces of crystalline silicon substrates (SiO2/Si(111), Si(111) ?H, Si(111) 7×7) and amorphous SiO2 in a form of a quartz glass. Thin films are grown using an effusion cell for Molecular Beam Epitaxy (MBE). Surface modified surfaces are covered subsequently by a silver, cobalt and silver thin layer. The individual film thickness is 6 nm. Consequently the samples are studied by the X-ray Photoelectron Spectroscopy (XPS) and the Atomic Force Microscopy (AFM). The morphology of thin films and growth modes are compared among the substrates. Growth modes change with the surface modification type. Complete trilayer system Ag/Co/Ag was prepared on SiO2/Si(111) and Si(111) 7×7. Such system can be employed in plasmonics in order to allow the control of surface plasmon polariton properties by an external magnetic field.
|
|
|
Pozzolanic Activity of Silicon Dioxide
Barek, Jaroslav ; Žižková, Nikol (referee) ; Rovnaníková, Pavla (advisor)
The aim of this bachelor's thesis is to investigate and identify the present status of resources with dominant amorphous silicon dioxide content and summarize feasible test methods to assess pozzolanic activity. The use of pozzolan as a partial replacement of Portland cement reduces the carbon dioxide emitted per tonne of product and can also improve various physical properties of the resulting cementitious composites. Assessment of the pozzolanic activity of cement replacement materials is increasingly important because of the economic sustainability of cementing materials. The pozzolanic activity of wheat straw ash, silica fume, nanosilica, two diatomites, glass powder and expanded perlite have been investigated and compared using the strength activity index test, the modified Chapelle test and the pozzolanicity test in accordance with the European Standard EN 196-5. From an experimental investigation of seven different pozzolans, the following main conclusions can be drawn. In the case of an acid-base titration (determination of [OH–], the procedure specified in EN 196-5) is better to use Tashiro (mixed indicator) instead of required methyl orange, Tashiro changes color at the endpoint of a titration distinctly. Strength activity index: the procedure used was based on EN 450-1. In its current form, this procedure is misleading because of two other significant properties of the pozzolan, namely its density and its water-reducing/increasing capabilities. Based on the results of our experimental investigation, the current testing procedure is evaluated against an alternative in which the 25% pozzolan replacement for cement is performed on a volumetric basis and the volume fraction of water is held constant.
|
guest ::
